Tripp Lite SMART750RM1U 750VA / .75kVA / 600 watt line interactive, sine wave UPS system offers complete power protection for critical network applications in a highly efficient 1U total rack/tower configuration. Simultaneous-use network management interfaces include USB, RS-232 and optional SNMP/Web accessory card. Line interactive voltage regulation, network-grade surge suppression and long-lasting sine wave AC output during blackouts make this UPS ideal for advanced networking applications in datacenters, computer rooms and network closets.
More from the Manufacturer
Main Specification
General Information |
Manufacturer |
Eaton Corporation |
Manufacturer Part Number |
SMART750RM1U |
Manufacturer Website Address |
http://www.eaton.com |
Brand Name |
Tripp Lite by Eaton |
Product Line |
SmartPro |
Product Name |
SmartPro 750RM1U UPS |
Product Type |
Line-interactive UPS |
Technical Information |
Plug/Connector Type |
NEMA 5-15P |
Receptacle Type |
NEMA 5-15R |
Receptacle Detail |
6 x NEMA 5-15R |
Emergency Power OFF |
Yes |
Cord Length |
10 ft |
Power Description |
Load Capacity (VA) |
750 VA |
Load Capacity (Watt) |
600 W |
Input Voltage |
120 V AC |
Output Voltage |
120 V AC |
Waveform Type |
Sine Wave |
Management |
Network Management |
SNMP Manageable |
Alarm |
Low Battery |
Alarm |
On Battery |
Alarm |
Overload |
Controls/Indicators |
Status Indicators |
5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED. |
Interfaces/Ports |
USB |
Yes |
Total Number of Expansion Slots |
1 |
Battery Information |
Battery Chemistry |
Lead Acid |
Backup/Run Time (Full Load) |
4.90 Minute |
Backup/Run Time (Half Load) |
13.20 Minute |
Battery Life |
6 Year |
Typical Battery Recharge Time |
4 Hour |
Hot Swappable |
Yes |
Environmental Conditions |
Maximum Operating Temperature |
104°F (40°C) |
Physical Characteristics |
Height |
1.8" |
Width |
17.5" |
Depth |
16.8" |
Rack Height |
1U |
Weight (Approximate) |
30 lb |
Miscellaneous |
Package Contents |
- SMART750RM1U UPS System
- Mounting hardware
- Cabling for USB & DB9 monitoring and EPO switching
- PowerAlert unattended shutdown and UPS/Power monitoring software
- Warranty information and instruction manual
|
Additional Information |
- SMART750RM1U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
- 750VA / 450 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
- Supports 1U rackmount installation in 2 or 4 post rack enclosures, upright tower placement also supported
- Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V
- Includes 6 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank) that can be powered off and back on again via software interface
- PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
- Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunies
- Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
- Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices
- Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
- Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
- Emergency Power Off (EPO) interface with cable
- Multi-function audible alarms and set of 5 front panel LEDs
- Network-grade AC surge suppression
- Attractive all-black color scheme
- UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
- Two year warranty with $250,000 connected equipment insurance (USA & Canada only)
|
Certifications & Standards |
UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications |
Country of Origin |
China |
TAA Compliant |
Yes |
Warranty |
Limited Warranty |
3 Year |
General Information |
Power Rating |
750 VA
|
Output Voltage Rating |
120 V
|
Number of Outputs |
6
|
Runtime-Full Load |
7 min
|
Runtime-Half Load |
24 min
|
MODEL- SMART750RM1U VENDOR- TRIPPLITE
FEATURES- SmartPro Rack/Tower UPS System- Black finish
Intelligent, line-interactive network power management system.
750VA line interactive 1U rack/tower UPS system with sine wave
output in AC and battery mode; 6 outlets arranged in 2 switchable
load banks; Simultaneous communications via SNMPWEBCARD slot, USB
and DB9 serial ports; Included PowerAlert UPS monitoring software
manages an unlimited number of network UPS systems; Corrects
brownouts and overvoltages from 83 to 147V; $250,000 Ultimate
Lifetime Insurance (USA & Canada only).
Tripp Lite's SMART750RM1U intelligent, line interactive rack/tower
uninterruptible power supply prevents data loss, downtime and
equipment damage due to power outages, voltage fluctuations and
transient surges.
Requires only one rack space (1U) in a standard rack enclosure, with
included accessories for upright tower placement. Large internal
batteries offer 24 minutes half load runtime and 7 minutes at full
load. Maintains regulated 120V nominal output without using battery
power during brownouts and overvoltages from 83 to 147V. 750VA/450
watt power handling capability and full time sine wave output
offers guaranteed compatibility with networking, telecom and other
sensitive electronic applications.
Includes a total of 6 outlets arranged in 2 load banks that are
individually controllable via software interface to reboot select
equipment on demand or automatically shed less significant loads to
extend battery runtime for more critical equipment. Supports remote
monitoring of UPS and site power conditions via built-in USB and
DB9 monitoring ports. Includes PowerAlert UPS monitoring and
unattended shutdown software with complete cabling. Built-in
accessory slot supports SNMP with optional SNMPWEBCARD adapter.
Emergency Power Off (EPO) interface offers option for instantaneous
power-off of UPS and connected equipment in the case of fire or
emergency situation. Multi-function audible alarms and set of 5
front panel LEDs offer at-a-glance notification of UPS and line
power status. Network-grade AC surge suppression protects equipment
from damage and performance problems resulting from transient
surges and line noise. Attractive all-black color scheme.
Find the TrippLite UPS appropriate for your needs. Try the TrippLite UPS Sizing Guide Today.
Includes SMART750RM1U UPS System, Mounting hardware, Cabling for USB &
DB9 monitoring and EPO switching, PowerAlert unattended shutdown and
UPS/Power monitoring software, Warranty information and instruction
manual.
* SMART750RM1U line interactive UPS offers battery derived sine wave AC
output during power outages, voltage regulation during brownouts and
overvoltages, plus network grade AC surge suppression.
* 750VA/450 watt power handling capability with full-time sine wave output
offers guaranteed compatibility with networking, telecom and other
sensitive electronic devices.
* Supports 1U rackmount installation in 2 or 4 post rack enclosures,
upright tower placement also supported.
* Large internal batteries offer runtimes of 24 minutes at half load
(350VA/225 watts) and 9 minutes at full load (750VA/470 watts).
* Maintains regulated 120V nominal output during brownouts and overvoltages
from 83 to 147V.
* Includes 6 UPS-supported outlets arranged in 2 individually controllable
load banks (2 outlets per bank) that can be powered off and back on again
via software interface.
* PowerAlert UPS monitoring and unattended shutdown software enables
configurable network broadcast messaging, pager & email notification,
event logging and running user-defined script commands.
* Offers simultaneous monitoring by up to 3 directly-connected devices
through included USB, DB9 and SNMP* interfaces (*requires optional
SNMPWEBCARD), or the monitoring of any number of additional UPS systems
over IP with included PowerAlert monitoring software. Free PowerAlert
enterprise management software is also available for select opportunies.
* Communications ports support messaging of UPS and line power status,
including on-battery, low-battery, power restored, AC line voltage, DC
battery voltage and remaining battery capacity.
* Supports timed inverter shutoff after unattended shutdown, activate self-
test and UPS output power control for scheduled or immediate reboot of
connected devices.
* Supports Tripp Lite's WatchDog software application to restore
unresponsive programs by systematically restarting applications,
operating systems and ultimately rebooting completely locked computers by
momentarily switching UPS power off and back on again (requires optional
WATCHDOGSW).
* Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter.
* Emergency Power Off (EPO) interface with cable.
* Multi-function audible alarms and set of 5 front panel LEDs.
* Network-grade AC surge suppression.
* Attractive all-black color scheme.
* UPS battery set ships fully assembled and ready for installation, no time
consuming connection of internal batteries by user is necessary.
* Two year warranty with $250,000 connected equipment insurance (USA &
Canada only).
-- SPECIFICATIONs --------------------------------
OUTPUT- Output volt amp capacity (VA): 750
Output watt capacity (watts): 450
Output nominal voltage: 120V AC sine wave output in AC and
battery mode.
Output voltage regulation: LINE MODE, Sine wave line voltage
120V (-21% +8%); BATTERY MODE, Sine
wave output within 5% of 120VAC.
Output frequency regulation: LINE MODE, Passes line frequency of
60Hz +/-10%; BATTERY MODE, Inverter
output regulated to 60Hz +/-0.5Hz.
Outlet quantity/type: (6) NEMA 5-15R output receptacles
Custom load management receptacles: Includes 2 load banks, each with 2
outlets, that support automated
load shedding and remote reboot on
demand of locked network devices.
Configurable via PowerAlert software
to automatically switch off
optional loads, like monitors, to
increase available runtime for
servers and other critical devices.
Overload protection: 15A input breaker
INPUT - Maximum input amps/watts: 4.6A/508 watts
Input connection type: NEMA 5-15P
Input cord length: 10 ft., 14 gauge
Recommended electrical service: 15A 120V
BATTERY- Full load runtime: 7 minutes (450VA)
Half load runtime: 24 minutes (225VA)
DC system voltage: 24 VDC
Typical battery lifespan: 3-6 years, depending on usage
Battery recharge rate: 2-4 hours to 90%
Battery Access: Hot-swappable batteries are accessible via
battery door.
VOLTAGE REGULATION-
Voltage regulation : Line interactive voltage regulation corrects input
voltages between 83 and 147 back to usable 120V
nominal levels.
Overvoltage correction: Input voltages between 128 adn 147 are reduced by
12%.
Brownout correction : Input voltages between 83 and 105 are boosted by
14%.
LEDS ALARMS & SWITCHES-
Front panel LEDs: 5 front panel LEDs - Green POWER LED, 3 color BATTERY
CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY
WARNING LED.
Alarms: 3 function audible alarm indicate: power failure
conditions- 4 short beeps every 10 seconds; overload -
continuous short beeps; and low battery - continuous
tone.
Switches: Includes 2 front panel mounted push-button switches for
system enable, self-test and alarm cancel functions.
SURGE/NOISE SUPPRESSION-
AC surge suppression : 1800 joules
AC suppression response time: Instantaneous
EMI/RFI AC noise suppression: Yes
COMMUNICATIONs -
Network monitoring port: Includes 2 built-in monitoring ports, 1 USB &
1-DB9. Each supports on battery, low battery,
power restored, AC line voltage, DC battery
voltage, load percentage, battery charge
current, battery capacity, internal UPS
temperature and line frequency status
messaging. Interface supports timed inverter
shutoff after unattended shutdown, activate
self-test and 10 second reboot of connected
equipment. Supports reboot of all connected
devices at once or individual load banks via
software interface. Compatible with Tripp
Lite's PowerAlert and WatchDog software.
Software and cabling: Includes USB cable and PowerAlert Software
SNMP compatibility: Built-in accessory slot accommodates internal
SNMP/Web card and other network accessories.
WatchDog compatibility: Yes, compatible with Tripp Lite's WatchDog
system service to restore operation to locked
equipment through soft reboot of application/
OS or hard power off/on reboot of connected
equipment - ideal for unattended kiosk
applications.
LINE/BATTERY TRANSFER -
Transfer time from line power to battery mode: 2-4 milliseconds
Low voltage transfer to battery power: 83V (resets to line power
as line voltage increases
to 87V or higher).
High voltage transfer to battery power: 147V (resets to line power
as line voltage decreases
to 143V or lower).
EPO PORT - Includes RJ11 EPO (emergency power off) port and cable.
TVSS GROUND- Includes back panel grounding point with thumbscrew for data
line surge suppressors and other network accessories
requiring a safe grounding point.
COLD START - Yes, inverter can be "cold started" to enable temporary AC
output during a power failure.
MATERIAL - Steel construction
FORM FACTOR- Supports 1U rackmount installation in in 2 or 4 post racks,
rackmount flanges are reconfigurable to support upright tower
placement.
COOLING - Built-in cooling fan
ENVIRONMENT- Operating Temperature: +32 to +104 degrees Fahrenheit
Storage Temperature: +5 to +122 degrees Fahrenheit
Relative Humidity: 0 to 95%, non-condensing
Line mode BTU/hr. (Max.): 39.2
Battery mode BTU/hr. (Max.): 133.0
APPROVALS - UL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM
(Mexico).
SIZE- 17.5"w x 1.75"h x 16.75"d WT.- 30.0 lbs.
www.tripplite.com