Tripp Lite SMART1500RMXL2U UPS

1.44kVA/1.44kW/120V Battery Backup for Distributed IT, Telecom or Enterprise Deployments
This rack-mount line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your valuable IT equipment or destroy data. The SMART1500RMXL2U is ideal power management for high-end in-rack networking equipment, including servers, VoIP phones, data storage and PoE switches. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment.

Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages
The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting. Extra runtime is available by connecting up to four optional extended battery modules (BP48VRM2U, sold separately).

Optional LX Platform Network Management Card Allows Remote Access 24/7
The WEBCARDLXE network interface (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.

NEMA 5-15R Outlets Protect Your Connected Components
Eight managed 5-15R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four outlets are grouped into two programmable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.

Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions
AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART1500RMXL2U maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure.

Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better
This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

ENERGY STAR-Certified to Help You Save Money and Protect the Environment
By meeting strict U.S. Department of Energy and U.S. Environmental Protection Agency requirements, this ENERGY STAR 2.0 UPS system provides high operational efficiency to signal a reduction in BTU emissions, save on utility and cooling costs and help protect the environment.

More from the Manufacturer

General Information
Manufacturer	Tripp Lite by Eaton
Manufacturer Part Number	SMART1500RMXL2U
Manufacturer Website Address	https://tripplite.eaton.com/
Brand Name	Tripp Lite by Eaton
Product Line	SmartPro
Product Name	SMART1500RMXL2U UPS
Product Type	Line-interactive UPS
Technical Information
AVR	Yes
Plug/Connector Type	NEMA 5-15P
Receptacle Type	NEMA 5-15R
Receptacle Detail	8 x NEMA 5-15R
Cord Length	10 ft
Transfer Time	4 ms
EMI/RFI Noise Filter	Yes
Phase	Single Phase
Energy Saving	Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
Application/Usage	Network Device
Application/Usage	High-end System
Power Description
Load Capacity (VA)	1440 VA
Load Capacity (Watt)	1440 W
Input Voltage	120 V AC
Output Voltage	100 V AC
Output Voltage	125 V AC
Output Voltage	120 V AC
Output Voltage	110 V AC
Input Frequency	60 Hz
Output Frequency	60 Hz
Waveform Type	Sine Wave
Output Power Factor	1
Management
Network Management	SNMP Manageable
Alarm	Remote Shutdown
Alarm	Low Battery
Alarm	Overload
Alarm	UPS StartUp
Alarm	Power Failure
Controls/Indicators
Status Indicators	UPS status (Solid Green) Battery Mode (Solid Orange) Battery Low Warning (Flashing Orange) Fault/Alarm (Solid Red)
Interfaces/Ports
USB	Yes
EPO Port	Yes
Battery Information
DC System Voltage	48 V DC
Battery Characteristics	Valve-regulated
Battery Chemistry	Lead Acid
Backup/Run Time (Full Load)	5.10 Minute
Backup/Run Time (Half Load)	15.10 Minute
Battery Life	6 Year
Hot Swappable	Yes
Typical Battery Recharge Time	4 Hour
Replaceable Battery	Yes
Environmental Conditions
Storage Temperature	5°F (-15°C) - 122°F (50°C)
Maximum Operating Temperature	104°F (40°C)
Sound Emission (A-Weighted)	40 dB(A)
Physical Characteristics
Height	3.5"
Width	17.2"
Depth	17.6"
Rack Height	2U
Form Factor	Rack/Tower
Weight (Approximate)	50.71 lb
Miscellaneous
Package Contents	SMART1500RMXL2U UPS System PowerAlert software with USB and DB9 cables Mounting hardware for 4 post rackmount installation Cable for Emergency Power Off interface Instruction manual with warranty information
Country of Origin	China
Warranty
Limited Warranty	3 Year
Additional Warranty Information	3 year with registration. Note: Registration is required for 3-year warranty.

General Information
Power Rating	1500 VA
Output Voltage Rating	120 V
Number of Outputs	8
Runtime-Full Load	4.9 min
Runtime-Half Load	14 min

Download DataSheet

Similar Products: