TRIPP LITE 

SMART1000RM1UN Tripp Lite 1000VA UPS Line Interactive RM 120V 800W w Installed SNMPWEBCARD

Mfg Part Number:  SMART1000RM1UN  
Image may not reflect the actual item.
Price: $1,257.59
Quantity:
In Stock: 816
Last Updated: Nov 18, 2025
No Sales Tax except these states
, PO and Wire.

Protects Mission-Critical Rack-Mounted Equipment

  • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
  • Audible alarm signals loss of utility power, overload and low battery
  • 6 NEMA 5-15R outlets
  • 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
  • 450-joule surge suppression rating
Reliable Battery Backup
  • Supports half load up to 14 min. and full load up to 4 min.
  • Internal batteries designed for hot-swap field replacement
Pre-Installed WEBCARDLX Network Interface
  • Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
  • Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status
Reduce Service Calls with Auto Probe Autonomous Device Management
  • Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
Switchable Outlets
  • 2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads

Automatic Voltage Regulation (AVR)

  • Maintains 120V nominal output over input range of 83V-147V without using battery power

EMI/RFI Line Noise Filtering

  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance

LED Indicators

  • Front-panel LEDs signal power, voltage correction, load level and battery charge state

Communications Ports

  • USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert)
  • EPO port supports emergency shutdown in large facilities

Versatile Installation Options

  • Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
  • Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
  • Compatible with vertical mount cabinets

More from the Manufacturer

Main Specification
General Information
Manufacturer Eaton Corporation
Manufacturer Part Number SMART1000RM1UN
Manufacturer Website Address https://tripplite.eaton.com/
Brand Name Tripp Lite by Eaton
Product Line SmartPro
Product Model SMART1000RM1UN
Product Name SmartPro SMART1000RM1UN 1kVA Rack-mountable
Product Type Line-interactive UPS
Technical Information
Receptacle Type NEMA 5-15R
Receptacle Detail 6 x NEMA 5-15R
Power Description
Load Capacity (VA) 1000 VA
Load Capacity (Watt) 800 W
Input Voltage 120 V AC
Output Voltage 120 V AC
Battery Information
Backup/Run Time (Full Load) 4 Minute
Physical Characteristics
Height 1.7"
Width 17.5"
Depth 16.8"
Rack Height 1U
Form Factor Rack-mountable
Weight (Approximate) 32 lb
Miscellaneous
Package Contents
  • SmartPro SMART1000RM1UN 1kVA Rack-mountable
  • Mounting Hardware
  • Cabling for USB & DB9 Monitoring and EPO Switching
  • PowerAlert Unattended Shutdown and UPS/Power Monitoring Software
  • Instruction Manual
Country of Origin China
TAA Compliant Yes
Environmentally Friendly Yes
Environmental Compliance Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty 3 Year
product information
WARNING:: The plastic used in cable products can expose you to lead and lead components, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
[1024] [true] [Yes] [No] [Yes]