SMART2500XLHG Tripp Lite SMART 2500XLHG Medical Grade Tower UPS System

UL 60601-1 compliance is required for UPS systems within patient care areas. Get complete, compliant power protection with Tripp Lite's SMART2500XLHG SmartPro® Medical UPS System. The SMART2500XLHG provides a high load capacity 2200VA/1920W, full UL 60601-1 3rd edition compliance. Protects connected medical equipment against data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. It features a USB port, input locking clamp, equipotential earth bonding lug, 4 NEMA 5-15/20R outlets, and 4 IEC C13 outlets for universally adaptable outlet options. The SMART2500XLHG offers a complete power protection solution for clinical labs, diagnostic imaging, ophthalmology, medical equipment, imaging and other devices requiring medical grade protection. With built-in Faraday shielding, the SMART2500XLHG provides full line isolation and reduces the cumulative leakage current of connected equipment to less than 100 µA for optimal safety in patient care areas. Full isolation also provides continuous noise filtering and enhanced common mode surge suppression. Featuring advanced line-interactive operation, it provides regulated 120V nominal output without using battery power during brownouts and overvoltages. Large internal batteries support connected equipment during blackouts and optional external battery packs (BP48V24-2U and BP48V60RT-3U) provide extended runtime tailored to your application. The SMART2500XLHG features a USB communication port that works with included PowerAlert software to provide UPS and site power monitoring plus automatic file saves and safe unattended shutdown of connected equipment in the event of a prolonged power failure.

Application Usage This UPS contains a lead acid battery designed to be connected continuously to an AC power source, except during brief power outages. It is not intended for frequent charge/discharge cycles, such as mobile cart applications where the UPS is often disconnected from the power source. Using the SMART2500XLHG in this type of application will void the battery warranty

More from the Manufacturer

General Information
Manufacturer	Eaton Corporation
Manufacturer Part Number	SMART2500XLHG
Manufacturer Website Address	http://www.eaton.com
Brand Name	Tripp Lite by Eaton
Product Line	SmartPro
Product Model	SMART2500XLHG
Product Name	SMART 2500XLHG Medical Grade Tower UPS System
Product Type	Line-interactive UPS
Technical Information
Plug/Connector Type	IEC 60320 C20
Receptacle Type	IEC 60320 C13
Receptacle Type	NEMA 5-15/20R
Receptacle Detail	4 x IEC 60320 C13
Receptacle Detail	4 x NEMA 5-15/20R
Transfer Time	4 ms
Power Description
Load Capacity (VA)	2200 VA
Load Capacity (Watt)	1920 W
Input Voltage	120 V AC
Output Voltage	120 V AC
Interfaces/Ports
Serial Port	Yes
USB	Yes
Battery Information
Backup/Run Time (Full Load)	4.40 Minute
Backup/Run Time (Half Load)	13 Minute
Typical Battery Recharge Time	4.50 Hour
Hot Swappable	Yes
Physical Characteristics
Height	9.3"
Width	8.9"
Depth	19.1"
Form Factor	Tower
Weight (Approximate)	73.30 lb
Miscellaneous
Package Contents	SMART 2500XLHG Medical Grade Tower UPS System Poweralert Software CD Warranty Information Instruction Manual USB Cable DB9 Cable
Certifications & Standards	UL1778 CSA FCC Part 15 UL60601-1
Software Included	PowerAlert Software
Country of Origin	China
Environmentally Friendly	Yes
Environmental Compliance	Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty	2 Year

Similar Products: