The Emulex Gen 6 (16/32G) Fibre Channel (FC) Host Bus Adapters (HBAs) by Broadcom are designed to address the demanding performance, reliability and management requirements of modern networked storage systems that utilize high performance and low latency solid state storage drives and hard disk drive arrays.

Fibre Channel is known as the gold standard for network storage connectivity in enterprise and cloud deployments. The latest Emulex Gen 6 FC HBAs with Dynamic Multi-core architecture offer higher performance, lower latency, enhanced diagnostics and manageability that benefit both 16GFC and 32GFC environments.

The unique Emulex Dynamic Multi-core architecture delivers unparalleled performance and more efficient port utilization than other HBAs by applying all ASIC resources to any port that needs it. Compared to the previous generation, Emulex Gen 6 HBAs deliver 2x greater bandwidth - 12,800MBps (2 ports 32GFC, or 4 ports 16GFC, full duplex), less than half the latency, and support an industry-leading 1.6 million IOPS per adapter. The quad-port LPe32004 delivers up to 3.2 million IOPS per adapter.

The adapters are NVMe over Fabrics-enabled, delivering an additional 55% lower latency than SCSI, and support NVMe over Fabrics and SCSI concurrently.

Emulex LPe31000-series HBAs are available with single, dual or quad 16GFC optics that can be upgraded with 32GFC optics later to utilize the full performance of Gen 6 FC technology. A second quad-port 16GFC model is available that features a low-profile design. It provides the highest port density within a low-profile form factor (optics are not upgradeable).

The LPe32000-series is available with single, dual or quad 32GFC optics.

Applications continue to grow in size and scale and, to support them, enterprises are increasingly turning to new server technologies that contain hundreds of processor cores as well as high-performance storage solutions including low-latency NVMe all-flash arrays (AFAs). NVMe can significantly increase the performance of storage area networks (SANs), making the selection of high-speed networking technology the critical element for achieving maximum system-wide performance.

The LSI20160B is "all-purpose" adapter. It features a single channel with 160MBps throughput. It is designed for ISP servers, high-end desktops and workstations.

9600 Series 24G PCIe 4.0 Tri-Mode RAID Adapters and eHBAs | 3rd-Generation Tri-Mode x8 and x16 NVMe/ SAS/SATA MegaRAID® Adapters and eHBAs

The High-Performing 16- and 24-Port Family of 9600 RAID and eHBAs Delivers Breakthrough RAID Rebuild Times, Application Storage Performance, and Advanced Data Protection Capabilities.

The new Broadcom® 9600 family of 24G SAS MegaRAID adapters and HBAs address the performance shift that today's data centers are facing as they transition to higher core count CPUs and SSD-based server storage. The 9600 series Tri-Mode RAID adapters and eHBAs enable high-performing 24G serial-attached SCSI (SAS), PCIe Gen 4.0 storage connectivity, and flexible system designs to support NVMe, SAS, and SATA devices.

The 16- and 24-port 9600 series adapters are powered by the Broadcom 8th generation of Tri-Mode 4000 series I/O Controllers (IOC) and 4100 series RAID-on-Chip (ROC) families, based on the industry-leading Fusion- MPT (Message Passing Technology). MegaRAID and eHBA 9600 series of adapters deliver 2x the bandwidth and up to 2x the IOPS (4K RR); with the MegaRAID adapters also delivering more than 3x the RAID 5 IOPS (4K RW).

Broadcom continues to offer the industry's broadest portfolio of storage solutions, backed by decades of experience and trusted by the world's leading server and storage suppliers. Broadcom provides the building blocks for storage solutions that help customers prioritize, store, protect, and secure critical data.

Tri-Mode SerDes Technology

Broadcom Tri-Mode SerDes technology enables the operation of NVMe, SAS, and SATA storage devices in a single drive bay. A single RAID or eHBA adapter can operate in all three modes concurrently servicing NVMe, SAS, or SATA drives. The adapter can negotiate between speeds and protocols to seamlessly work with any of the three types of storage devices. Tri-Mode support provides a non-disruptive way to evolve existing data infrastructure. By upgrading to a Tri-Mode adapter, users can expand beyond SAS/SATA and use NVMe without major changes to other system configurations. The 9600 series adapters are compatible with SlimSAS 24G SFF-8654 internal or SFF-8674 external connectors. The 9600 adapters are also compatible with existing PCI Express SFF-8639 Module (U.2) backplanes allowing users to boost performance for today's ever increasing bandwidth requirements.

The introduction of PCIe devices executing NVMe command sets to the existing SAS/SATA infrastructure makes industry- standard hot-pluggable drive bays even more versatile. The Tri-Mode interface provides SAS data transfer rates of 22.5, 12, and 6Gb/s per lane, SATA at 6Gb/s data transfer rates per lane, or PCIe data transfer rates of up to 16.0 GT/s per lane and is backward compatible to 5.0/2.5 GT/s. The storage controllers automatically negotiate between the speeds and protocols. A T-10 End-to-End Data Protection (EEDP) model for early detection of and recovery from data corruption, and Spread Spectrum Clocking (SSC) for EMI reduction are supported. Additional features include SAS 2.1 power management and DataBolt2 technology, allowing users to take advantage of 24Gb/s speeds while utilizing existing 12 and 6Gb/s drives and backplanes.

9600 Series 24G PCIe 4.0 Tri-Mode RAID Adapters and eHBAs | 3rd-Generation Tri-Mode x8 and x16 NVMe/ SAS/SATA MegaRAID® Adapters and eHBAs

The High-Performing 16- and 24-Port Family of 9600 RAID and eHBAs Delivers Breakthrough RAID Rebuild Times, Application Storage Performance, and Advanced Data Protection Capabilities.

Overview

The new Broadcom® 9600 family of 24G SAS MegaRAID adapters and HBAs address the performance shift that today's data centers are facing as they transition to higher core count CPUs and SSD-based server storage. The 9600 series Tri-Mode RAID adapters and eHBAs enable high-performing 24G serial-attached SCSI (SAS), PCIe Gen 4.0 storage connectivity, and flexible system designs to support NVMe, SAS, and SATA devices.

The 16- and 24-port 9600 series adapters are powered by the Broadcom 8th generation of Tri-Mode 4000 series I/O Controllers (IOC) and 4100 series RAID-on-Chip (ROC) families, based on the industry-leading Fusion- MPT (Message Passing Technology). MegaRAID and eHBA 9600 series of adapters deliver 2x the bandwidth and up to 2x the IOPS (4K RR); with the MegaRAID adapters also delivering more than 3x the RAID 5 IOPS (4K RW).

Broadcom continues to offer the industry's broadest portfolio of storage solutions, backed by decades of experience and trusted by the world's leading server and storage suppliers. Broadcom provides the building blocks for storage solutions that help customers prioritize, store, protect, and secure critical data.

Tri-Mode SerDes Technology

Broadcom Tri-Mode SerDes technology enables the operation of NVMe, SAS, and SATA storage devices in a single drive bay. A single RAID or eHBA adapter can operate in all three modes concurrently servicing NVMe, SAS, or SATA drives. The adapter can negotiate between speeds and protocols to seamlessly work with any of the three types of storage devices. Tri-Mode support provides a non-disruptive way to evolve existing data infrastructure. By upgrading to a Tri-Mode adapter, users can expand beyond SAS/SATA and use NVMe without major changes to other system configurations. The 9600 series adapters are compatible with SlimSAS 24G SFF-8654 internal or SFF-8674 external connectors. The 9600 adapters are also compatible with existing PCI Express SFF-8639 Module (U.2) backplanes allowing users to boost performance for today's ever increasing bandwidth requirements.

The introduction of PCIe devices executing NVMe command sets to the existing SAS/SATA infrastructure makes industry- standard hot-pluggable drive bays even more versatile. The Tri-Mode interface provides SAS data transfer rates of 22.5, 12, and 6Gb/s per lane, SATA at 6Gb/s data transfer rates per lane, or PCIe data transfer rates of up to 16.0 GT/s per lane and is backward compatible to 5.0/2.5 GT/s. The storage controllers automatically negotiate between the speeds and protocols. A T-10 End-to-End Data Protection (EEDP) model for early detection of and recovery from data corruption, and Spread Spectrum Clocking (SSC) for EMI reduction are supported. Additional features include SAS 2.1 power management and DataBolt2 technology, allowing users to take advantage of 24Gb/s speeds while utilizing existing 12 and 6Gb/s drives and backplanes.

9600 Series 24G PCIe 4.0 Tri-Mode RAID Adapters and eHBAs | 3rd-Generation Tri-Mode x8 and x16 NVMe/ SAS/SATA MegaRAID® Adapters and eHBAs

The High-Performing 16- and 24-Port Family of 9600 RAID and eHBAs Delivers Breakthrough RAID Rebuild Times, Application Storage Performance, and Advanced Data Protection Capabilities.

The new Broadcom® 9600 family of 24G SAS MegaRAID adapters and HBAs address the performance shift that today's data centers are facing as they transition to higher core count CPUs and SSD-based server storage. The 9600 series Tri-Mode RAID adapters and eHBAs enable high-performing 24G serial-attached SCSI (SAS), PCIe Gen 4.0 storage connectivity, and flexible system designs to support NVMe, SAS, and SATA devices.

The 16- and 24-port 9600 series adapters are powered by the Broadcom 8th generation of Tri-Mode 4000 series I/O Controllers (IOC) and 4100 series RAID-on-Chip (ROC) families, based on the industry-leading Fusion- MPT (Message Passing Technology). MegaRAID and eHBA 9600 series of adapters deliver 2x the bandwidth and up to 2x the IOPS (4K RR); with the MegaRAID adapters also delivering more than 3x the RAID 5 IOPS (4K RW).

Broadcom continues to offer the industry's broadest portfolio of storage solutions, backed by decades of experience and trusted by the world's leading server and storage suppliers. Broadcom provides the building blocks for storage solutions that help customers prioritize, store, protect, and secure critical data.

Tri-Mode SerDes Technology

Broadcom Tri-Mode SerDes technology enables the operation of NVMe, SAS, and SATA storage devices in a single drive bay. A single RAID or eHBA adapter can operate in all three modes concurrently servicing NVMe, SAS, or SATA drives. The adapter can negotiate between speeds and protocols to seamlessly work with any of the three types of storage devices. Tri-Mode support provides a non-disruptive way to evolve existing data infrastructure. By upgrading to a Tri-Mode adapter, users can expand beyond SAS/SATA and use NVMe without major changes to other system configurations. The 9600 series adapters are compatible with SlimSAS 24G SFF-8654 internal or SFF-8674 external connectors. The 9600 adapters are also compatible with existing PCI Express SFF-8639 Module (U.2) backplanes allowing users to boost performance for today's ever increasing bandwidth requirements.

The introduction of PCIe devices executing NVMe command sets to the existing SAS/SATA infrastructure makes industry- standard hot-pluggable drive bays even more versatile. The Tri-Mode interface provides SAS data transfer rates of 22.5, 12, and 6Gb/s per lane, SATA at 6Gb/s data transfer rates per lane, or PCIe data transfer rates of up to 16.0 GT/s per lane and is backward compatible to 5.0/2.5 GT/s. The storage controllers automatically negotiate between the speeds and protocols. A T-10 End-to-End Data Protection (EEDP) model for early detection of and recovery from data corruption, and Spread Spectrum Clocking (SSC) for EMI reduction are supported. Additional features include SAS 2.1 power management and DataBolt2 technology, allowing users to take advantage of 24Gb/s speeds while utilizing existing 12 and 6Gb/s drives and backplanes.

The MegaRAID SCSI 320-2X offers system builders a robust and powerful RAID solution designed around a high-speed PCI-X host interface for maximum data throughput and fault tolerant data protection. The highly flexible design features two internal and two external Ultra320 SCSI connectors for maximum storage connectivity. Its a half-length form factor offers space-saving configurability for today's rack-mount and appliance chassis architectures.

By leveraging a powerful yet reliable RAID engine with advanced features, including: 64-bit addressing support, flexible memory and caching policies, easy-to-use management utilities, and quick installation and setup capabilities, the MegaRAID SCSI 320-2X is quickly becoming the preferred Ultra320 RAID solution of OEMs, system integrators and value added resellers (VARs) worldwide.

Applications continue to grow in size and scale and, to support them, enterprises are increasingly turning to new server technologies that contain hundreds of processor cores as well as high-performance storage solutions including low-latency NVMe all-flash arrays (AFAs). NVMe can significantly increase the performance of storage area networks (SANs), making the selection of high-speed networking technology the critical element for achieving maximum system-wide performance.

Accelerate Workloads

64GFC doubles IO performance for database apps compared to 32GFC. Ideally suited to new PCI 4.0 servers, dual-port 64GFC HBAs deliver up to a 63% improvement in database query excution time versus running in a PCIe 3.0 server

Lower Operational Cost

The Emulex SAN Manager app provides centralized, in-band, visibility, management and automatic congestion management for all managed HBAs in your SAN. No server reboots are required for firmware updates, queue depth changes and optics replacements.

Protect Your Data

Fibre Channel networks are trusted to protect the world's most sensitive data. Emulex Gen 7 brings added security with Silicon Root of Trust - firmware security embedded into the hardware itself.

The MegaRAID 9500 series is the industry's first PCIe Gen 4.0 RAID adapter family, offering PCIe Gen 4.0 host and storage interfaces. The MegaRAID 9540-8i adapter, based on the SAS3808 PCIe 4.0 x8 IO Controller (IOC) device, delivers twice the performance of previous generations. 

Small and medium businesses (SMBs) deploying entry-level server platforms and workstations need affordable, reliable storage solutions. The MegaRAID 9540-8i Tri-Mode Storage Adapter is a PCIe Gen 4.0 12Gb/s SAS/SATA/PCIe (NVMe) controller card that addresses these needs by delivering proven performance and RAID data protection for a range of critical applications.

The adapters' Tri-Mode SerDes technology negotiates between speeds and protocols to seamlessly to enable the operation of NVMe, SAS or SATA devices in a single drive bay getting the most performance and flexibility out of any drive protocol.

The high-port 9500-16i Tri-Mode, PCIe Gen 4.0 HBA is ideal for increased connectivity and maximum performance for enterprise data center flexibility.

With increased bandwidth and IOPS performance compared to previous generations, the 9500-16i adapter delivers the performance and scalability needed by critical applications.

• Connects up to 1024 SAS/SATA devices or 32 NVMe devices
• Provides maximum connectivity and performance for high-end servers and applications
• Support critical applications with the bandwidth of PCIe® 4.0 connectivity
• Universal Bay Management (UBM) Ready