TRIPP LITE 

Tripp Lite SmartPro SMART2200RM2UN 2200VA Rack-mountable UPS

Mfg Part Number:  SMART2200RM2UN  
Image may not reflect the actual item.
Price: $1,380.03
Quantity:
In Stock: 301
Last Updated: May 01, 2024
No Sales Tax except these states
, PO and Wire.
1.95kVA/1.95kW/120V Battery Backup for Distributed IT, Telecom or Enterprise Deployments

This rack-mount line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your valuable IT equipment or destroy data. The SMART2200RM2UN is ideal power management for high-end in-rack networking equipment, including servers, VoIP phones, data storage and PoE switches. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment.

Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages

The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting.

Pre-Installed LX Platform Network Management Card Allows Remote Access 24/7

The WEBCARDLXE network interface enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.

NEMA 5-20R Outlets Protect Your Connected Components

One L5-20R and six managed 5-20R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four outlets are grouped into two programmable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.

Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions

AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART2200RM2UN maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure.

Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

Intuitive Front-Panel Interface for Convenient UPS Operation and Monitoring

The two-line front-panel LCD monitoring screen features ten selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The control panel rotates to accommodate both rack-mount and tower configurations.

More from the Manufacturer

Main Specification
General Information
Manufacturer Tripp Lite by Eaton
Manufacturer Part Number SMART2200RM2UN
Manufacturer Website Address https://tripplite.eaton.com/
Brand Name Tripp Lite by Eaton
Product Line SmartPro
Product Model SMART2200RM2UN
Product Name SmartPro SMART2200RM2UN 2200VA Rack-mountable UPS
Product Type Line-interactive UPS
Technical Information
Plug/Connector Type NEMA 5-20P
Receptacle Type NEMA 5-15/20R
Receptacle Type NEMA 5-15R
Receptacle Detail 4 x NEMA 5-15/20R
Receptacle Detail 4 x NEMA 5-15R
Transfer Time 5 ms
Power Description
Load Capacity (VA) 1950 VA
Load Capacity (Watt) 1950 W
Input Voltage 110 V AC
Output Voltage 120 V AC
Management
Network Management SNMP Manageable
Interfaces/Ports
Serial Port Yes
USB Yes
Battery Information
Backup/Run Time (Full Load) 4.50 Minute
Backup/Run Time (Half Load) 12 Minute
Hot Swappable Yes
Typical Battery Recharge Time 4.50 Hour
Physical Characteristics
Height 3.5"
Width 17.5"
Depth 23.7"
Rack Height 2U
Form Factor Rack-mountable
Weight (Approximate) 57.60 lb
Miscellaneous
Package Contents
  • SmartPro SMART2200RM2UN 2.2kVA Rack-mountable UPS
  • PowerAlert Software CD
  • USB Cable
  • Serial Cable
  • EPO Cable
  • 4 Post Rackmount Installation kit
  • Instruction Manual
  • Network Interface Card
Software Included PowerAlert Software
Country of Origin China
Warranty
Limited Warranty 3 Year

Mounting Kits

PDUs

Proximity Sensors

Remote Management Adapters

Services

Temperature & Humidity Sensors

UPS Batteries

WARNING:: The plastic used in cable products can expose you to lead and lead components, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
[1024] [true] [Yes] [No] [Yes]