Tripp Lite SMART2200RMXL2U UPS System

1.95kVA/1.95kW/120V Battery Backup for Distributed IT, Telecom or Enterprise Deployments
This rack-mount line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your IT equipment or destroy data. The SMART2200RMXL2U is ideal power management for high-end in-rack networking equipment, including servers, VoIP phones, data storage and PoE switches. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment.

Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages
The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting. Extra runtime is available by connecting up to four optional extended battery modules (BP72VRM2U, sold separately).

Optional LX Platform Network Management Card Allows Remote Access 24/7
The WEBCARDLXE network interface (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.

NEMA Outlets Protect Your Connected Components
One L5-20R and six 5-20R managed outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four 5-20R outlets are split into two independently switchable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.

Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions
AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART2200RMXL2U maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure.

Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better
This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

ENERGY STAR-Certified to Help You Save Money and Protect the Environment
By meeting strict U.S. Department of Energy and U.S. Environmental Protection Agency requirements, this ENERGY STAR 2.0 UPS system provides high operational efficiency to signal a reduction in BTU emissions, save on utility and cooling costs and help protect the environment.

More from the Manufacturer

General Information
Manufacturer	Tripp Lite by Eaton
Manufacturer Part Number	SMART2200RMXL2U
Manufacturer Website Address	https://tripplite.eaton.com/
Brand Name	Tripp Lite by Eaton
Product Line	SmartPro
Product Model	SMART2200RMXL2U
Product Name	SmartPro SMART2200RMXL2U 1950VA Rack/Tower UPS
Packaged Quantity	1 Each
Product Type	Line-interactive UPS
Technical Information
Plug/Connector Type	NEMA 5-20P
Receptacle Type	NEMA 5-20R
Receptacle Type	NEMA L5-20R
Receptacle Detail	1 x NEMA L5-20R
Receptacle Detail	6 x NEMA 5-20R
Overload Protection	Yes
Cord Length	10 ft
Transfer Time	4 ms
Phase	Single Phase
Application/Usage	Data Storage
Application/Usage	IT Equipment
Application/Usage	Server
Application/Usage	Switch
Power Description
Load Capacity (VA)	1950 VA
Load Capacity (Watt)	1950 W
Input Voltage	120 V AC
Output Voltage	120 V AC
Output Voltage	110 V AC
Output Voltage	115 V AC
Output Voltage	100 V AC
Output Frequency	60 Hz
Waveform Type	Pure Sine Wave
Surge Energy Rating	380 J
Output Power Factor	1
Display & Graphics
Display	LCD
Management
Network Management	SNMP/Web
Alarm	Remote Shutdown
Alarm	Low Battery
Alarm	UPS Fault
Alarm	Overload
Alarm	UPS StartUp
Alarm	Power Failure
Controls/Indicators
Status Indicators	5 Front Panel Leds: Green Power Led Green Voltage Correction Led 3 Color Battery Charge Led 3 Color Output Load Led Red Battery Warning Led
Interfaces/Ports
Serial Port	Yes
USB	Yes
EPO Port	Yes
USB (HID Compliant) Port	Yes
Battery Information
DC System Voltage	72 V DC
Battery Characteristics	Valve-regulated
Battery Chemistry	Lead Acid
Backup/Run Time (Full Load)	4 Minute
Backup/Run Time (Half Load)	12 Minute
Hot Swappable	Yes
Typical Battery Recharge Time	4.50 Hour
Replaceable Battery	Yes
Environmental Conditions
Maximum Operating Elevation	10000 ft
Maximum Storage Elevation	32808 ft
Storage Temperature	5°F (-15°C) - 122°F (50°C)
Minimum Operating Temperature	32°F (0°C)
Maximum Operating Temperature	104°F (40°C)
Physical Characteristics
Height	3.4"
Width	17.2"
Depth	23.7"
Rack Height	2U
Form Factor	Rack/Tower
Weight (Approximate)	65.30 lb
Miscellaneous
Package Contents	SmartPro SMART2200RMXL2U 1950VA Rack/Tower UPS USB Cable DB9 Cable Rack-mounting Hardware Tower support Stands Safety Instructions Advanced User Guide
Environmentally Friendly	Yes
Country of Origin	China
Warranty
Limited Warranty	3 Year

General Information
Power Rating	2200 VA
Output Voltage Rating	120 V
Number of Outputs	8
Runtime-Full Load	6 min
Runtime-Half Load	16 min

Tripp Lite's SMART2200RMXL2U intelligent, line interactive UPS protects server, networking and telecommunications equipment from blackouts, voltage fluctuations and transient surges in a compact tower / rackmount housing. UPS system occupies only 2 rack spaces (2U) in any 2 or 4 post 19 inch rackmount application with a maximum depth of only 14.1 inches. Also supports upright tower use with 2USTAND accessory. Large capacity 2200VA/1600 watt maximum rated UPS system offers 8 minutes runtime at full load and 20 minutes at half load during power failures. Runtime is further expandable with the addition of BP48V242U or BP48V60RT3U external battery packs. Line interactive voltage regulation corrects brownouts as low as 75v and overvoltages as high as 147v to fully regulated 120v nominal output for smooth continuous operation of connected equipment. Includes a total of 8 outlets, 3 pairs of which can be individually powered off and back on via software interface to selectively reboot remote equipment or shed less critical loads to extend battery runtime for more critical loads. Battery runtime can be extended with external rackmount battery packs. Includes slot for internal SNMP/web card, plus 2 DB9 and 2 USB enhanced monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power data. Ships in attractive gray color scheme with optional use black front bezel to alter UPS appearance to match black color rackmount equipment. Compatible with Tripp Lite's PowerAlert and Watchdog service software. 2 year warranty. $50,000 connected equipment insurance.

Typical Applications:
Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systemsPackage

Includes:
SMART2200RMXL2U UPS System
PowerAlert Software and cabling
Mounting hardware
Warranty information
Instruction manual

Download DataSheet

Similar Products: