The SRFILTER comes prefabricated and ready to install in standard 48U rack enclosures on the inside of the door. Vertical Velcro strips will need to be trimmed accordingly to accomodate 45U, 42U and 25U enclosures. When a filter becomes dirty or worn from use, be sure to replace. Velcro pieces can remain attached to the door, with no need for replacement.
The SRSWITCHDUCT is a rackmount, ducting kit that pulls air in from the front of the rack and directs is to the side intake on equipment such as network switches. Each duct is 2U tall, with one above and one below the mounted equipment. Foam baffling is included to create a hot air exhaust pathway to prevent hot air from recirculating back to the cold aisle side of the rack.
Need to help your equipment perform at its peak while reducing your facility's cooling and energy cost? The Srthermduct kit can change a standard Tripp Lite SmartRack 42-48 U enclosure into sealed passive cooling structure that allows heat that is exhausted from equipment to be vented upwards into the facility CRAC/HVAC air return system. The SRTHERMDUCT Thermal Duct Kit can change a standard S ...