SU10000RT3U2TF Tripp Lite SmartOnline 10000VA Rack-mountable/Tower UPS with Two Step-down Transformers

Tripp Lite SU10000RT3U2TF 10,000VA / 10kVA / 9000 watt online, double-conversion UPS system offers complete power protection for critical network applications. This system delivers online, double-conversion UPS protection with zero transfer time, suitable for advanced networking applications. Fault-tolerant auto-bypass prevents unexpected service interruptions during UPS overload or internal fault conditions. Included detachable PDU with manual bypass switch enables hot-swappable replacement of entire UPS power module with no interruption to connected equipment. Enhanced availability, fault tolerance and simple hot-swap replacement options make this UPS ideal for advanced networking applications in data centers, computer rooms, network closets and rugged industrial locations.

General Information
Manufacturer	Tripp Lite by Eaton
Manufacturer Part Number	SU10000RT3U2TF
Manufacturer Website Address	https://tripplite.eaton.com/
Brand Name	Tripp Lite by Eaton
Product Line	SmartOnline
Product Model	SU10000RT3U2TF
Product Name	SmartOnline 10000VA Rack-mountable/Tower UPS with Two Step-down Transformers
Product Type	Double Conversion Online UPS
Technical Information
Plug/Connector Type	Hard Wire 3-wire
Receptacle Type	NEMA L6-30R
Receptacle Type	NEMA 5-15/20R
Receptacle Type	NEMA L6-20R
Receptacle Detail	2 x NEMA L6-20R
Receptacle Detail	4 x NEMA 5-15/20R
Receptacle Detail	24 x NEMA L6-30R
Power Description
Load Capacity (VA)	10000 VA
Load Capacity (Watt)	8000 W
Input Voltage	220 V AC
Input Voltage	110 V AC
Output Voltage	208 V AC
Management
Network Management	SNMP Manageable
Interfaces/Ports
Serial Port	Yes
Battery Information
Backup/Run Time (Full Load)	6 Minute
Backup/Run Time (Half Load)	12 Minute
Hot Swappable	Yes
Typical Battery Recharge Time	8 Hour
Physical Characteristics
Height	40"
Width	26"
Depth	41"
Rack Height	10U
Form Factor	Rack/Tower
Weight (Approximate)	435 lb
Miscellaneous
Package Contents	SmartOnline 10000VA Rack-mountable/Tower UPS with Two Step-down Transformers 3U power module with detachable hot-swap PDU input/output panel and manaul bypass switch 3U external battery pack 2 x 2U step-down transformers Two sets of 4-post rackmount rails (one for each 3U component); one set of towe
Software Included	PowerAlert UPS monitoring software
Country of Origin	China
Warranty
Limited Warranty	2 Year

General Information
Power Rating	-
Output Voltage Rating	-
Number of Outputs	-
Runtime-Full Load	-
Runtime-Half Load	-

SU10000RT3U2TF is a 10,000 VA (10kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 10 rack spaces (3U power module, 3U battery pack and QTY 2 - 2U step-down transformers). Maximum installed rack depth of 32.5 inches. PRODUCT FEATURES: Expandable battery runtime with optional BP192V12-3U external battery packs; Full time sine wave 208 and 120V +/-2% output; Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output; Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V; Standard 3-wire 208V hardwire input connection; NEMA L6-30R, L6-20R and Nema 5-15/20R output receptacles; Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting connected equipment; Network-grade AC surge and noise suppression; Zero transfer time between AC and battery operation; Network management interfaces support simultaneous communications via RS-232, contact-closure port and optional SNMPWEBCARD slot; Supports simultaneous detailed monitoring of equipment load levels, self-test data and mains power conditions via all 3 network interfaces at once; Includes PowerAlert monitoring software and complete cabling; Emergency Power Off (EPO) interface; Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power status; Detailed LCD panel with scroll buttons offer detailed diagnostic test information on startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level; Audible Alarm; Self-test; Fault-tolerant auto-bypass mode; 4 post rackmount accessories included; 2-9USTAND tower kit included; 2POSTRMKITWM two post rackmount hardware accessories available; Field replaceable, hot swappable power module and external battery packs; Attractive all-black UPS design.

Device Type	UPS - external
Battery Enclosure Type	External
Height (Rack Units)	10U
Width	17.5 in
Depth	32.5 in
Height	21.1 in
Enclosure Color	Attractive black
Power Device
UPS Technology	On-line
Input Voltage	AC 208 V
Input Voltage Range	AC 156 - 276 V
Frequency Required	50/60 Hz
Input Connector(s)	Hardwire
Output Voltage	AC 120/208 V ± 2% ( 50/60 Hz )
Output connector(s)	30 x power NEMA L6-30, power NEMA L6-20, power NEMA 5-15/20
Power Output Connectors Details	24 x power NEMA 5-15/20 4 x power NEMA L6-20 2 x power NEMA L6-30
Power Provided	8 kW / 10000 VA
Output Waveform	Sinewave
Surge Suppression	Standard
Battery
Technology	Lead acid
Voltage Provided	240 V
Run Time (Up To)	6 min at full load
Recharge Time	8 hour(s)
Expansion / Connectivity
Interfaces	1 x management - RS-232 - 9 pin D-Sub (DB-9) 1 x management - 9 pin D-Sub (DB-9)
Expansion Slots Total (Free)	1 ( 1 ) x expansion slot
Miscellaneous
Rack Mounting Kit	Included
Equipment Protection Value	250000 US Dollars
Features	Audible alarm, emergency power off, built-in maintenance bypass, LED indicators
Compliant Standards	CE, CSA, NOM, UL 1778
Software / System Requirements
Software Included	TrippLite PowerAlert
Manufacturer Warranty
Service & Support	2 years warranty
Service & Support Details	Limited warranty - 2 years
Environmental Parameters
Min Operating Temperature	32 °F
Max Operating Temperature	104 °F
Humidity Range Operating	0 - 95%

Download DataSheet

Similar Products: