TRIPP LITE 

TRIPP LITE B126-1A0-U HDMI OVER CAT5/CAT6 EXTENDER ACTIVE RECIEVER VIDEO AUDIO 1080P

Mfg Part Number:  B126-1A0-U  
Image may not reflect the actual item.
Price: $179.99 + Free Shipping
Quantity:
In Stock: 44
Last Updated: May 03, 2024
No Sales Tax except these states
, PO and Wire.

The B126-1A0-U HDMI over Cat5/Cat6 Active Extender works with Tripp Lite's B126-002 or B126-004 transmitter to extend an HDMI audio/video signal to an HDMI projector, monitor or television. It's ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow.

The receiver's built-in HDMI cable connects to the display. Cat5e/6 cable connects the receiver to the B126-Series transmitter(for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series). Power is supplied by the included USB Micro-B to USB-A cable, which connects between the receiver and a USB port on the display or a USB wall charger.

The B126-1A0-U can extend a 1080p(@ 60 Hz) signal up to 125 feet with full, rich stereo. Built-in RJ45 LEDs indicate the units are receiving power and a signal from the source. Built-in equalization control lets you fine-tune the image quality at the display. Easy to set up with no software or drivers to install. Works with all operating systems and HDMI sources.

Features

Extends HDMI Audio/Video Signals to an HDMI Display

  • Extends a 1080p (@ 60 Hz) signal up to 125 ft.
  • Ideal for digital signs, trade shows, presentations, classrooms, churches and retail settings
  • Connects to transmitter with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)
  • Supports stereo audio and HDCP
  • Built-in equalization control lets you adjust the image

Easy to Set Up and Use

  • Plug-and-play engineering-no software, drivers or external power supply
  • Powered via included USB cable
  • Connects quickly to display with built-in HDMI cable
  • LEDs indicate when units are receiving power and a signal from the source
  • Works with all operating systems and HDMI sources

TAA-Compliant

  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

System Requirements

  • Display with HDMI port
Main Specification
General Information
Manufacturer Tripp Lite by Eaton
Manufacturer Part Number B1261A0U
Manufacturer Website Address https://tripplite.eaton.com/
Brand Name Tripp Lite by Eaton
Product Model B126-1A0-U
Product Name B126-1A0-U Receiver Unit
Product Type Video Extender Receiver
Technical Information
Connectivity Technology Wired
Number of Output Devices Supported 1
Maximum Operating Distance 125 ft
Video
Graphics Modes Full HD
Maximum Video Resolution 1920 x 1080
Interfaces/Ports
Network (RJ-45) Yes
HDMI Out Yes
Number of Network (RJ-45) Ports 1
Number of HDMI Outputs 1
Media & Performance
Media Type Supported Twisted Pair
Twisted Pair Cable Standard Category 6
Miscellaneous
Package Contents
  • B126-1A0-U Receiver Unit
  • USB Micro-B to USB-A Cable, 3 ft.
  • Screwdriver for Adjusting Equalization
  • Owner's Manual
Country of Origin Taiwan
TAA Compliant Yes
Environmentally Friendly Yes
Warranty
Limited Warranty 1 Year
WARNING:: The plastic used in cable products can expose you to lead and lead components, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
[1024] [true] [Yes] [No] [Yes]