Tripp Lite SMART3000RM2U UPS System

3kVA/3kW/120V Battery Backup for Distributed IT, Telecom or Enterprise DeploymentsThis rack-mount line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your IT equipment or destroy data. The SMART3000RM2U is ideal power management for high-end in-rack networking equipment, including servers, VoIP phones, data storage and PoE switches. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment.
Reliable Battery Backup Keeps You Operational Through Power OutagesThe field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting.
Optional LX Platform Network Management Card Allows Remote Access 24/7The WEBCARDLXE network interface (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.
NEMA Outlets Protect Your Connected ComponentsOne L5-30R and six 5-20R managed outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four 5-20R outlets are split into two independently switchable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.
Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage ConditionsAVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART3000RM2U maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure.
Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform BetterThis UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

More from the Manufacturer

Tripp Lite's SmartPro 3000 Rackmount (2U) UPS System provides intelligent, line-interactive battery backup with expandable runtime via optional external battery packs for networking equipment and servers. 3,000VA power capacity allows you to work through short blackouts or safely shut down during longer ones. The unit has 9 AVR protected outlets (3 pairs of remote control outlets), an accessory slot, and diagnostic LEDs. It also features 2 built-in serial ports and 2 built-in USB ports that work with PowerAlert Software to provide simultaneous automatic unattended shutdown of multiple systems. Tripp Lite's PowerAlert Software is the only UPS software capable of managing every type and brand of UPS on your network, from every manufacturer. $50,000 Ultimate Lifetime Insurance covers connected equipment.

Key Buying Points:

3,000VA output power rating (2,250 watts)

Battery run time: 13 minutes half load / 4 minutes full load, expandable with external battery packs

Innovative design makes unit adaptable for rackmount, wall-mount, and tower applications

Rackmount fits standard 19-in. rack (2U rack space)

9 AVR protected outlets (6 NEMA 5-15, 2 NEMA 5-15/20, NEMA L5-30) (3 pairs of remote control outlets); 10-ft. cord (NEMA L5-30 plug)

Line-interactive with 4 levels of automatic voltage regulation (AVR)

AVR adjusts incoming voltage to 120 volt output level without using battery power

3 Pairs of remote control outlets can be powered off and back on via PowerAlert Software interface, enabling you to reboot a locked-up device, or to shed load in order to provide longer UPS runtime to other devices

2 DB9 serial ports and 2 USB ports to manage multiple network servers simultaneously; SNMP compatible

Accessory slot for use with optional SNMP card, network management, and connectivity products

PowerAlert unattended shutdown software and network cables included

PowerAlert Software compatible with every brand of UPS, from every manufacturer

Complete surge protection and EMI/RFI noise filtering

$50,000 Ultimate Lifetime Insurance covers connected equipment

Diagnostic LEDs (indicate 17 performance conditions)

Hot-swap battery replacement

External battery capability

Emergency Power Off (EPO) port for connection of UPS to user-supplied switch to enable emergency shutdown; connection cable included

Optional black front panel included

Mounting hardware included

Typical Applications:

Corporate and departmental servers, UNIX servers/workstations, hubs/routers/gateways/bridges, CAD/CAM/CAE workstations, network workstations, network file servers, and more.

Package Includes:

SmartPro 3000 Rackmount (2U) UPS System

PowerAlert Software, (2) 6-ft. DB9 cables, and (2) 6-ft. USB cables

12-ft. EPO connection cable

Optional black front panel

Mounting hardware

Instruction manual with warranty information

General Information
Power Rating	3000 VA
Output Voltage Rating	120 V
Number of Outputs	9
Runtime-Full Load	4 min
Runtime-Half Load	13 min

Download DataSheet