The SYSTEM 2 is a complete loudspeaker system consisting of an 8C5PAX - 8Ω O.D. dual cone loudspeaker and a TBLU - 5W 25/70V transformer mounted on a BS8W - square, screw mount, steel baffle with a SE2WVP - slanted, steel, vandal resistant, surface mount enclosure with four (4) 8-32 threaded inserts and a single 1/2"conduit entrance. White powder coat finish.

The 4C3PA is a 4" O.D., square frame loudspeaker with a cloth surround, 5 oz. magnet, and an 8 Ohm nominal impedance. Frame has black powder coat finish.

The BS8VP is a square, stud mount, vandal resistant, steel baffle for 8" O.D. loudspeakers in a white powder coat finish. Welded studs on the back surface are 8-32 x 1". The BS8VP is supplied with a steel interwoven security screen that is mounted between the baffle and loudspeaker. Four (4) 8-32 x 1" 'pin-in-hex' mounting screws are also included.

The SYSTEM 19 is a complete, UL Listed, 2-way, shallow depth, lightweight, 2' x 2' ceiling tile replacement loudspeaker system consisting of an 6-1/2" O.D. LF woofer, 1" tweeter, and a 20W-70V rotary select transformer including an 8 Ohm tap. Molded fiber enclosure is 1412 CID. Steel baffle with standard perforation and four (4) seismic tie-off points. Cable clamp is included. No assembly required.

The 8C5Z45B is an 8" O.D dual cone loudspeaker with 5 oz. magnet and a 45 ohm nominal impedance. Frame has a black powder coat finish.

The SSB-1900DEEP is a rust resistant steel, adjustable, load bearing support with a steel, 30.3 CID, 1900 electrical junction box.

The SYSTEM 1VP is a complete, vandal resistant loudspeaker system consisting of an 8C10PAOT - 8Ω O.D. moisture resistant loudspeaker with a 5 oz. magnet and a TBLU - 5W 25/70V transformer mounted on a BS8VP - square, stud mount, vandal resistant, steel baffle with a SE1WVP - square, steel, vandal resistant, surface mount enclosure with four (4) 8-32 threaded inserts and a single 1/2"conduit entrance. Three (3) interwoven, steel security screens are mounted between the faceplate and loudspeaker. Tamper resistant, 8-32 x 1" 'pin-in-torx' hardware included. White powder coat finish.

The 8C10PAX is an 8" O.D. dual cone loudspeaker with a 10 oz. magnet, and an 8 Ohm nominal impedance. Frame has a black powder coat finish.

The UL22/25/JB is a complete 2' x 2' UL listed fire signaling device with built-in junction box for mass notification & emergency communications providing superior voice intelligibility performance, shallow depth, lightweight, fire-protective signaling device. Components include: an 8" O.D. loudspeaker, 10-oz. magnet, fire retardant loudspeaker with a 4W-25V rotary select transformer and integral junction box for secure and inspectable connections. Integral enclosure is 1,412 CID molded fiber. Grille is perforated steel with four (4) seismic tie-off points in a white powder coat finish. Line supervision capacitor is included. No assembly required.

The DTS4T is a desktop intercom station consisting of a 3" , square frame loudspeaker with a 2.35 oz. ceramic magnet, 1 Watt 25 Volt transformer, and a moisture resistant cone, a push-to-talk (PTT) button, and a 3-pin XLR microphone connector. The DTS4T has a protective steel screen mounted between the loudspeaker and the enclosure perforations. It is equipped with tamper resistant, #6-32 x 1" , 'pin-in-torx', stainless steel screws. The DTS4T has a durable, charcoal gray, powder coat finish.