The twenty four ports PoE midspan provides up to 60 Watts of power over Ethernet and offers a IEEE 802.3bt-compliant solution for remote powering of current as well as emerging high power applications. The PD-9524GC is designed specifically to power IEEE 802.11 access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other high power Ethernet end terminals with 60W of power.

Microchip Power over Ethernet splitters enable easy integration of the Power over Ethernet technology into legacy equipment. Using the same infrastructure, without making any modifications to the end points, already designed devices, such as Wireless LAN access points, Web cameras or IP telephone sets become Power over Ethernet enabled when connected to the active splitter.

The single port PoE midspan provides up to 90 Watts of power over Ethernet and offers a IEEE 802.3bt-compliant solution for remote powering of current as well as emerging high power applications. The PD-9601GC is designed to power PoE compliant devices such as IEEE 802.11ax access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other high power Ethernet end terminals requiring up to 90W of power.

The twelve ports PoE midspan provides up to 90 Watts of power over Ethernet and offers a IEEE 802.3bt-compliant solution for remote powering of current as well as emerging high power applications. The PD-9612GC is designed specifically to power IEEE 802.11 access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other high power Ethernet end terminals with 90W of power.

The six ports PoE midspan provides up to 60 Watts of power over Ethernet and offers a IEEE 802.3bt-compliant solution for remote powering of current as well as emerging high power applications. The PD-9506GC is designed specifically to power IEEE 802.11 access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other high power Ethernet end terminals with 60W of power.

The PD-OUT-SP11 is a high quality surge protection device designed to protect indoor Ethernet networks from lightning that may come from the outdoor environment through Ethernet cables. The product is enclosed in an IP66 rated aluminum weatherproof enclosure.

The device can be installed in the entrance to the building to protect the indoor network or on a pole close to the outdoor device (WLAN AP, IP Camera, etc.) to protect it.

The PD-9000G family is designed specifically to power IEEE 802.11n and IEEE 802.3at access points, Pan-Tilt-Zoom (PTZ) and dome cameras, IP videophones, thin clients and other high-power Ethernet end terminals. The family includes 6-, 12- and 24-port models, which are backward compatible and safe to use with any 802.3af terminal such as VoIP phones, IP cameras and wireless LAN access points.

These plug-and-play midspans are easy and cost-effective solutions for leveraging an existing Ethernet infrastructure while also assuring a future-proof network.

For secure remote management, all PD-9000G models include PowerView Pro management software.

The six ports PoE midspan provides up to 90 Watts of power over Ethernet and offers a IEEE 802.3bt-compliant solution for remote powering of current as well as emerging high power applications. The PD-9606GC is designed specifically to power IEEE 802.11 access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other high power Ethernet end terminals with 90W of power.

The single port PoE midspan is a high-power solution for remote powering of current and emerging high power indoor applications. Generating 60W over 4 pair, the PD-9501-10GC enables remote power for a new range of applications including 802.11ac Access Points, pan-tilt zoom (PTZ) cameras and videophones.

Microsemi's PD-9001GR is a single port, high-power solution for remote powering of current and emerging high power applications. Generating up to 30W, the PD-9001GR enables remote power for a new range of applications including 802.11ac Access Points, pan-tiltzoom (PTZ) cameras and video-phones. It complies with the IEEE 802.3at PoE+ standard and is backward compatible with IEEE802.3af. It can power both existing 10/100Base-T network devices and emerging wireless 1000Base-T devices such as wireless IEEE 802.11ac access points and IP Cameras.

Features

• Single-port Gigabit PoE Midspan, 802.3at Compliant with 2-event classification
• Backwards compatible with IEEE802.3af
• 30W output power from -20ºC to +40ºC, 25W output at +55ºC
• 1000Base-T compatible
• Safe & reliable power over existing Ethernet infrastructure, only PoE devices receive power
• Automatic detection and protection of non-standard devices
• Plug-and-play installation
• Guaranteed up-time

Microchip's PD-9601GCO Power over Ethernet (PoE) single-port midspan offers a cost effective, IEEE 802.3bt type 4 compliant solution for outdoor installations, guaranteeing 90 Watts of power and ensuring safe and reliable operation in outdoor environment of any standard PoE data terminal. It allows wireless LAN access points, security network cameras and other IP terminals to receive power, along with data, over stan- dard Ethernet cables, leaving network infrastructure completely unaltered.

The PD-9601GCO also offers surge protection for both the AC and the PoE ports ensuring the indoor equip-ment is protected from outdoor surges.

Digital Ceiling is reshaping enterprises as the revolutionary PoE-based lighting system creates a new breed of smart buildings where everything is connected into a vast Internet of Things (IoT). Microsemi Digital Ceiling Switch Paves the Way for Smart Buildings with Enterprise IoT.

The Microsemi PDS-408G digital ceiling PoE switch offers an optimal and cost-effective solution for PoE application like PoE lighting and other digital ceiling applications. It allows lighting fixtures and other Ethernet terminals to receive power, along with data, over standard Ethernet cables in the most efficient way. The PDS-408G is a 480W fan-less switch, designed to be deployed in the ceiling or in communications rooms. Provides automatic output PoE power based on PoE PD device class. It supports full power mode by providing 60W for all 8 ports simultaneously and any specific port can go up to 90W.

The 480W high-speed switch can be managed over Web, SSH, Telnet, CLI. It has 8 ports of 10/100/1000 Mbps (Gigabit Ethernet) with PoE BT ports, 2 Gigabit ports and one 1000M/100M SFP port.

Features:

• Digital ceiling PoE Switch : 8 PoE 10/100/1000mbps ports + 3 10/100/1000mbps uplink ports
• Total available PoE power : 480W
• IEEE802.3bt compliant
• Supports legacy 60/90W PoE devices
• Full power of 8 x 60W - any individual port can go up to 90W
• Fanless design - enhanced reliability and silent operation
• High energy efficiency - very low power consumption in standby and in operation
• Layer 2 switch - including 802.1Q-based VLANs enables segmentation of networks for improved performance and security
• Remote management - Web and SNMP

The single port PoE midspan provides up to 60 Watts of power over Ethernet and offers a IEEE 802.3bt-compliant solution for remote powering of current as well as emerging high power applications. The PD-9501GC is designed specifically to power IEEE 802.11n and IEEE 802.3bt access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other high power Ethernet end terminals.

Microchip's PD-9001GO-ET Power over Ethernet (PoE) single-port midspan offers a cost-effective, IEEE 802.3atcompliant solution for outdoor installations, guaranteeing 30 W of power and ensuring safe and reliable operation of any standard PoE data terminal in outdoor environments. It allows wireless LAN access points, security network cameras, and other IP terminals to receive power and data over standard Ethernet cables, leaving network infrastructure completely unaltered. The PD-9001GO-ET also offers surge protection for both the AC and the PoE ports, ensuring the indoor equipment is protected from outdoor surges.

The Microchip outdoor mounting bracket, PD-OUT/MBK/S is designed for wall mount installations as well as small and large poles (up to 8'' diameter) installations

Summary

The single port PoE midspan provides up to 30 Watts of power over Ethernet and offers a IEEE 802.3at-compliant solution for remote powering of current and emerging high power indoor applications. The PD-9001-10GC enables remote power for a new range of applications including 802.11ac access points, pan-tilt-zoom (PTZ) cameras and videophones. It is backward compatible to IEEE 802.3af PoE standard. It can power both existing 10/100/1000Base-T network devices and emerging wireless 10G devices such as wireless IEEE 802.11ac access points.

Additional Features

• Number of ports: 1
• PoE output: 30W
• Data rates: 10/100/1000 Mbps & 10G
• Power input: AC
• Power cord options: US, EU (Europe), UK, BR (Brazil), AU (Australia), JP (Japan)
• Regulatory compliance: IEEE 802.3at (PoE), RoHS compliant, WEEE compliant, CE
• EMI: FCC Part 15, Class B, EN 55032 Class B (emissions), EN 55024 (immunity), VCCI
• Safety: UL/EN/IEC 60950-1 (Ed.2)
• Compact design

Microchip's PDS-204GCO is a next-generation outdoor Power over Ethernet (PoE) switch for smart cities. It allows Wi-Fi® access points, security network cameras and many other IoT devices to receive power and data over standard Ethernet cables, leaving network infrastructure completely unaltered.
With an IP67 rating, PDS-204GCO complies with the highest outdoor environment standards and enables easy installation without the need to open the unit.

The PDS-204GCO includes four PoE Giga ports with a total output power of 150W. It supports the IEEE® 802.3bt Type 4 standard and contains two fiber links that support 1G or 2.5G speeds each. It supports advanced network features to meet the highest cyber security threats at all network levels and enables multiple network topologies such as network daisy chain or ring for easy installation and network redundancy.

It also offers surge protection for both the AC and the PoE ports, ensuring the indoor equipment is protected from outdoor surges.

The Microchip PD-9501GCI is a single-port, high-power solution for remote powering of current and emerging high-power indoor applications. Generating 60W, the 9501GCI enables remote power for a new range of applications including wireless access points, Pan-Tilt Zoom (PTZ) cameras and other IP terminals. It complies to IEEE 802.3at PoE standard and is backward compatible to IEEE 802.3af. It can power both existing 10/100/1000Base-T network devices and 1000BaseT devices such as wireless IEEE wireless access points.

The Microchip PD-IN/SP11 is a high-quality surge protection device designed to protect indoor Ethernet networks from surge events that may come from outdoor environment through the Ethernet Cable. The SP11 device can be installed at the entrance of the building to protect the indoor network or in an outdoor cabinet close to the outdoor device (WLAN AP, IP Camera).

The Microchip outdoor mounting bracket, PD-OUT/MBK/ET is designed for wall mount installations as well as small and large poles (up to 8'' diameter) installations.