RackSolutions' Fixed Heavy Duty Rack Shelf is built to withstand even the heaviest equipment in a server rack. The shelf's 1/8" steel construction helps give the shelf an impressive 500 lbs (226 kgs) weight capacity and a depth of 28 inches (711 mm). For even heavier equipment, a version with a 900 lb (226 kgs) weight capacity is available. The extra heavy-duty version of this shelf uses stronger front and rear brackets that better spread the load of the shelf. Our heavy-duty rack shelves can be installed into racks with square, round, or threaded holes in EIA standard 2Post relay racks. They are ideal for equipment like large switches, UPSes and more.

In order to ensure that your equipment will mount properly using the 2Post Conversion Brackets, you must measure the width of your device's chassis (with the mounting rails installed) to see if the overall width exceeds 17.72". If it does, the Conversion Brackets may not work with your equipment. See illustration above for an example of how to measure the overall width. The RackSolutions 2 Post, Center Mount Conversion, 1U-7U server rack mounting kits allow users to create both 4 post cabinets on a 2 post rack, or mount 4 post equipment on 2 post racks. For 4 post cabinets on a 2 post rack, the equipment is designed for quick and easy assembly and installation. It is also easy to customize the setup for server rack cabinets, allowing users to convert only the space they need, instead of engaging in a larger project than necessary. When the assembly is configured to handle 4 post equipment on 2 post racks, it is compatible with 3" uprights and Dell, HP, IBM and other major server types. This setup is preferred by most leading OEM manufacturers. The 2 Post, Center Mount Conversion includes a number of features to help users easily create a server rack solution that meets their specific needs. At its simplest, the assembly can be set up to support a single, rackmount server, allowing the user to customize the rack's location to match where the server needs to go. However, solid steel conversion brackets equipped with coupling capabilities let users combine the brackets to support multiple rackmount servers or create an entire server cabinet.

More from the Manufacturer

In order to ensure that your equipment will mount properly using the 2Post Conversion Brackets, you must measure the width of your device's chassis (with the mounting rails installed) to see if the overall width exceeds 17.72". If it does, the Conversion Brackets may not work with your equipment. See illustration above for an example of how to measure the overall width. The RackSolutions 2 Post, Center Mount Conversion, 1U-7U server rack mounting kits allow users to create both 4 post cabinets on a 2 post rack, or mount 4 post equipment on 2 post racks. For 4 post cabinets on a 2 post rack, the equipment is designed for quick and easy assembly and installation. It is also easy to customize the setup for server rack cabinets, allowing users to convert only the space they need, instead of engaging in a larger project than necessary. When the assembly is configured to handle 4 post equipment on 2 post racks, it is compatible with 3" uprights and Dell, HP, IBM and other major server types. This setup is preferred by most leading OEM manufacturers. The 2 Post, Center Mount Conversion includes a number of features to help users easily create a server rack solution that meets their specific needs. At its simplest, the assembly can be set up to support a single, rackmount server, allowing the user to customize the rack's location to match where the server needs to go. However, solid steel conversion brackets equipped with coupling capabilities let users combine the brackets to support multiple rackmount servers or create an entire server cabinet.

More from the Manufacturer

The RackSolutions 2 Post Rack Rails are designed to give users a durable, high-performance rail solution for standard 19" server racks. As a result, the 2 Post Rack Rails are simultaneously durable and versatile. Durability comes from strong construction principles and a zinc plating finish. This allows the device to support 45 lbs for 1U devices, 75 lbs for 2U and a maximum weight of 200 lbs for 3U devices. All of this is achieved in a form factor 24" long with a mounting depth of 10" to 31.75". The 2 Post Rack Rails get their diversity from a form factor compatible with Dell, HP and IBM. servers. Furthermore, the rails can be mounted in both center and flush settings, making them easy to deploy in a variety of settings. This ease is furthered by the rails' compatibility with square, round or threaded holes. Besides giving users durability and versatility, the rails also offer a reliable, professional solution. To make this possible, RackSolutions equipped the rails with a built-in cable management bar to ease cable routing and hook-and-loop straps to help keep wires from going astray. The 2 Post Rack Rails ship with screws, cage nuts and nuts for all rack types, easing installation and ensuring users have all the hardware they need to assemble the server storage solution.

The Sliding Shelf/Rails for the Dell T3600 and T5600 mounts in any EIA-310, 19" rack with square, round or threaded holes. The T3600 or T5600 is secured to the shelf with a front and rear bracket allowing the shelf to dry slide on top of the metal flanges found on both sides of the universal, fixed mounting rails. The shelf slides completely out of the rack. The Sliding Shelf for the Dell T3600 and T5600 has a mounting depth range of 10 - 31.75" (254 - 806 mm). It includes a cabling crossbar that is optional for installation. Thumbscrews allow shelf for the T3600 and T5600 to be secured to the front of the rack. Cage nuts are required for square hole racks. This shelf is compatible with the Dell T3600, T3610, T5810, T5600, T5610 and Dell T7810.

Our adapter brackets are highly configurable tools that allow users to make mounting equipment of any depth work in almost any rack. Whether you are using Dell, HP, IBM or any major manufacturer's products, our adapter kits will be compatible. Brackets can be combined to increase U height.

More from the Manufacturer

Filler Panels are used to control the air flow inside of server racks. Without the use of filler panels, the hot exhaust air from the servers can be recirculated through the server and significantly reduce the cooling efficiency of the system. Installations that have Open Frame Racks, closed server cabinets or a 2Post rack can benefit from the use of filler panels. In any installations the filler panels also help give your rack a clean and professional look. Compatible with all EIA Standard 19" racks and cabinets with square, round and threaded holes including Dell, HP, Compaq, IBM, APC NetShelter, APW, Liebert, CPI Chatsworth, Rittal, Blackbox and many others.

Rack Solutions' 16U Office Cabinet securely houses servers and other IT equipment, yet fits in an office enviroment. The 16U Office Cabinet is perfect for small businesses and branch offices with in-house IT departments but no dedicated data center space or network closet. The 16U Office Cabinet includes security features that exceed the requirements of larger data center cabinets. The 16U Office Cabinet fully encloses equipment and has front & rear lockable doors.

The RackSolutions Heavy Duty Sliding Shelf is an ideal solution for environments where servers, computers and other equipment need to be stored on a sturdy shelf that can be slid forward for easy access during operation. The Sliding Rack Mount Shelves are compatible with square, threaded and round hole-based server racks, and feature an extension reach of 29". At 28" inches deep, the shelf allows users to safely store computers and other equipment. The versatile solution is also durable, as it is constructed of cold rolled steel and capable of holding 235 lbs of hardware. In terms of compatibility, the Sliding Rack Mount Shelves will fit on almost any standard EIA standard server racks. For sliding shelves, the supplementary accessories are also critical, and RackSolutions has them all. The slide is fitted with ball bearings and stops to ensure stable and secure operations. It also boasts a built-in cable management arm to help users professionally route wires regardless of what device they store on the shelf. Two anti-slip mats also come with any purchase to ensure equipment does not slide when the shelf is moved.

Our adapter brackets are highly configurable tools that allow users to make mounting equipment of any depth work in almost any rack. Whether you are using Dell, HP, IBM or any major manufacturer's products, our adapter kits will be compatible. The brackets themselves are 2U in height, but can be combined to mount up to 7U equipment safely. Look through the instructions for further details on how to combine brackets.

Optional heavy duty handles on the side, front, and rear covers.

The Secure Server Unit (SSU) from RackSolutions protects a server by locking it in the rack and preventing access to its ports, hard drives, etc. If you have a need to secure a single server within a shared rack, the SSU is the perfect solution. The Secure Server Unit is designed to help provide extra security for sensitive data or to be used as an alternative to a colocation cabinet. The unit includes a front and rear housing which both mount to the rack and are only accessible with a key. An included top, cross bar provides additional security for the server. The SSU is designed to accommodate two, 1U or one, 2U server and uses 3U of rack space.

The receptacles on this model of powerstrip are turned 90 degrees to allow for AC adapters. This type of unit is able to provide power from either the front or the rear depending on which model is used. The powerstrip has a lit ON/OFF switch to indicate power and a 15A circuit breaker to prevent over current situations. The Rack Mount Power Strip is CSA Certified and UL Recognized.

This slide rail kit allows the HP DL380 Gen 8 to be installed in any type of server rack. Works with DL380, Gen 8. These rails replace the HP rail kit that would normally come with the sever. This DL380 Gen 8,Gen 9 & Gen 10 rail kit allows the server to be installed in typical 4Post server racks as well as 2Post server racks. These rails are considered a dry slide type. They allow the server to slide in and out, but they are not ball bearing slides. Also, the rails do not include a stop catch mechanism that prevents the server from sliding completely out of the rack when removing it for servicing.

Blanking Panels, also called "filler panels" , are used to control the airflow inside of server racks. Without blanking panels, the hot exhaust air from the rear of the servers will recirculate through empty spaces in the server rack into the air intakes on the front of the servers. This reused hot air will significantly reduce the cooling efficiency of the system. Filler panels are the easiest and first step towards achieving your Power Usage Effectiveness (PUE) goals. Unlike many products on the market, RackSolutions Filler Panels use an innovative stability flange design to prevent airflow from flexing the filler panel. This reduces noise and vibration when a high amount of air is pushed into the filler panel. Along with the increase in airflow efficiency, RackSolutions filler panels give your rack a seamless and professional appearance. All our blanking panels are compatible with all EIA Standard 19" racks and cabinets.

Blanking Panels, also called "filler panels" , are used to control the airflow inside of server racks. Without blanking panels, the hot exhaust air from the rear of the servers will recirculate through empty spaces in the server rack into the air intakes on the front of the servers. This reused hot air will significantly reduce the cooling efficiency of the system. Filler panels are the easiest and first step towards achieving your Power Usage Effectiveness (PUE) goals. Unlike many products on the market, RackSolutions Filler Panels use an innovative stability flange design to prevent airflow from flexing the filler panel. This reduces noise and vibration when a high amount of air is pushed into the filler panel. Along with the increase in airflow efficiency, RackSolutions filler panels give your rack a seamless and professional appearance. All our blanking panels are compatible with all EIA Standard 19" racks and cabinets.

Blanking Panels, also called "filler panels" , are used to control the airflow inside of server racks. Without blanking panels, the hot exhaust air from the rear of the servers will recirculate through empty spaces in the server rack into the air intakes on the front of the servers. This reused hot air will significantly reduce the cooling efficiency of the system. Filler panels are the easiest and first step towards achieving your Power Usage Effectiveness (PUE) goals. Unlike many products on the market, RackSolutions Filler Panels use an innovative stability flange design to prevent airflow from flexing the filler panel. This reduces noise and vibration when a high amount of air is pushed into the filler panel. Along with the increase in airflow efficiency, RackSolutions filler panels give your rack a seamless and professional appearance. All our blanking panels are compatible with all EIA Standard 19" racks and cabinets.

Filler Panels are used to control the air flow inside of server racks. Without the use of filler panels, the hot exhaust air from the servers can be recirculated through the server and significantly reduce the cooling efficiency of the system. Installations that have Open Frame Racks, closed server cabinets or a 2Post rack can benefit from the use of filler panels. In any installations the filler panels also help give your rack a clean and professional look. Compatible with all EIA Standard 19" racks and cabinets with square, round and threaded holes including Dell, HP, Compaq, IBM, APC NetShelter, APW, Liebert, CPI Chatsworth, Rittal, Blackbox and many others.