The Cisco Coarse Wavelength-Division Multiplexing (CWDM) Small Form-Factor Pluggable (SFP) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy Gigabit Ethernet in their networks. The product set helps enable the flexible design of highly available, multiservice networks.

The Cisco CWDM SFP solution is a convenient and cost-effective solution for the adoption of Gigabit Ethernet and Fibre Channel in campus, data-center, and metropolitan-area access networks.

The Cisco Catalyst 4500 Series offers a variety of power supplies and accessories to meet the diverse needs of Enterprise and Service Provider customers. All of the available Cisco Catalyst 4500 Series power supplies can be used for data-only deployments, which typically require just a few hundred watts. For deployments that dictate support for PoE power, Cisco offers several options.

Cisco IOS Software is the world's leading network infrastructure software, delivering a seamless integration of technology innovation, business-critical services, and hardware support. Currently operating on millions of active systems, ranging from the small home office router to the core systems of the world's largest service provider networks, Cisco IOS Software is the most widely leveraged network infrastructure software in the world.

Spare

LL cable extends the length between any Aironet product and its antenna. With a loss of 6.7 decibels (dB) per 100 feet (30 meters [m]) for LL cable and 4.4 dB for the ULL cable, these cables provide installation flexibility without a significant sacrifice in range or performance.

LL cable extends the length between any Aironet product and its antenna. With a loss of 6.7 decibels (dB) per 100 feet (30 meters [m]) for LL cable and 4.4 dB for the ULL cable, these cables provide installation flexibility without a significant sacrifice in range or performance.

New, improved wireless LAN antenna cables.These low-loss cables have improved insulation and are far less susceptible to water penetration than the previous cables

A coaxial cable carries radio frequency (RF) energy between the antennas and the radio equipment. An antenna cable introduces signal loss in the antenna system for both the transmitter and receiver. In order to reduce signal loss, minimize the cable length and use only low-loss (LL) or ultra low-loss (ULL) antenna cable in order to connect radio devices to antennas.

RF coaxial cable = loss of signal strength

Loss of signal strength is directly proportionate to the length of the cable segment. As the diameter of the cable increases, signal loss decreases, but at a much higher purchase cost. As signal frequency increases (a higher-numbered channel), loss increases.

LL cable extends the length between any Aironet product and its antenna. With a loss of 6.7 decibels (dB) per 100 feet (30 meters [m]) for LL cable and 4.4 dB for the ULL cable, these cables provide installation flexibility without a significant sacrifice in range or performance.

This antenna operates in the 2400-2500 MHz band and is designed for use outdoors. The antenna is compatible with Cisco Aironet radio products utilizing a reverse-polarity threaded naval connector (RP-TNC) connector.

The Cisco Catalyst 4500 Series offers a variety of power supplies and accessories to meet the diverse needs of Enterprise and Service Provider customers. All of the available Cisco Catalyst 4500 Series power supplies can be used for data-only deployments, which typically require just a few hundred watts. For deployments that dictate support for inline power, Cisco offers several options.

The Cisco uBR10012 Universal Broadband Router provides a high-end, high-performance, high-capacity Cable Modem Termination System (CMTS) solution. The Cisco uBR10012 router is an aggregation platform that places a new level of intelligence and performance at the edge of the network, enabling cable service providers to maximize their revenues by delivering more feature-rich services to their customers. The system can provide high-speed data, broadband entertainment, and IP telephony services to residential and commercial subscribers using cable modems or digital set-top boxes (STBs).

Flexible antenna cable that extends access point cabling typically within an enclosure

Mast mount indoor/outdoor antenna with RP-TNC-This antenna was designed for WLAN applications for frequencies of 2400 MHz to 2500 MHz. The antenna is omni directional and has a nominal gain of 5.2 dBi. It is designed to be mounted on a round mast.

The DC output connectors require a Cisco 16-pin-to-14-pin cable (CAB-RPS-1614=) to connect to supported devices. One cable is supplied with the RPS; additional cables can be ordered separately. The 16-pin connector plugs into the RPS and the 14-pin connector plugs in to the device. Use only the Cisco cable for this connection.

This product is Guaranteed 100% Compatible with the Manufacturer Original.

The industry-standard Compatible Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFP can be used and interchanged on a wide variety of Cisco products

This easy-to-install Mini-GBIC (or SFP) module provides a simple way to add Gigabit functionality to your Linksys switch. Gigabit fiber is often used to connect two switches together. The technology used depends on the distance between the two switches.The SX module uses 850 nanometer wavelength light in multimode fiber optic cables, and can achieve distances up to 220 or 550 meters, depending on the fiber used.

Gigabit networking is the upper echelon of performance, especially compared to 10 and 100 Mbps connections. Formerly Linksys Business Series, now Cisco Small Business Network Accessories, the MGBT1 10/100/1000 Base-T Mini-GBIC SFP Transceiver gives you the ability to tap into faster networking speeds with a standard RJ-45 connection. Installation is as easy as sliding it into an accompanying port on a compatible Cisco switch.

This product is Guaranteed 100% Compatible with the Manufacturer Original.

The Compatible Cisco 100BASE-FX Small Form-Factor Pluggable (SFP) Fast Ethernet Interface Converter is a hot-swappable device that plugs into a Gigabit Ethernet SFP port on Cisco Catalyst 3750 Series, 3560 Series, and 2970 Series switches. The Cisco SFP provides full-duplex 100-Mbps connectivity between switches over multimode fiber (MMF) infrastructures. It offers investment protection and an easy migration path for customers moving to Gigabit Ethernet connections in the future

Optional Cables for Cisco Aironet 1300 Series Outdoor Access Point or Bridge

IEEE 802.3z-compliant optical fiber assembly consisting of a single-mode fiber permanently coupled off-center to a 62.5-micron multimode optical fiber with duplex SC connectors at one end and duplex LC connectors at the other end. The patch cord is 1 meter (3.28 feet) in length.