Moxa Mfg Mini-Store MOXA Major Lines
Moxa CP-114EL-DB25M 4 Port PCIe Board, with DB-25M cable, RS-232/422/485, Low Profile
MOXA Major LinesMfg Part Number: CP-114EL-DB25M , Item #: 953191
In Stock: 4
, PO and Wire.
- Box Content includes:
- CBL-M44M25x4-50: 4-Port male DB44 to male DB25 connection cable, 50cm(CP-104UL/CP-134U/CP-134U-I only)
Check here for other accessories.
Related Model(s):
4 Port PCIe Board, with DB-25M cable, RS-232/422/485, with 2KV optical Isolation, Low Profile
- PCI Express x1 compliant
- 921.6 Kbps maximum baudrate for super fast data transmission
- 128-byte FIFO and on-chip H/W, S/W flow control
- Low profile form factor fits small-sized PCs
- Drivers provided for Windows (Vista, 2003, XP, 2000), WinCE 5.0, Linux, and Unix
- Easy maintenance with on-board LEDs and management software
- 15 KV ESD protection on the board
| Hardware | |
| Comm. Controller | MU860 (16C550C compatible) |
| Bus | PCI Express x1 |
| Connector(s) | DB44 female |
| Serial Interface | |
| Serial Standards | RS-232 |
| Number of Ports | 4 |
| Number of Boards | 4 per PC (max.) |
| Serial Line Protection | |
| ESD Protection | 15 KV on the board |
| Performance | |
| Baudrate | 50 bps to 921.6 Kbps |
| Serial Communication Parameters | |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS, XON/XOFF |
| I/O Address | Assigned by BIOS |
| IRQ | Assigned by BIOS |
| Serial Signals | |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| Physical Characteristics | |
| Dimensions | 62.71 x 100 mm (2.47 x 3.94 in) |
| Driver Support | |
| Operating Systems | Windows (2000, XP/2003/Vista x86/x64), Windows CE 5.0, Windows XP Embedded, DOS, Linux 2.4/2.6, FreeBSD 4/5, QNX 6, SCO Open Server 5/6, UnixWare 7 |
| Environmental Limits | |
| Operating Temperature | 0 to 55°C (32 to 131°F) |
| Operating Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 85°C (-4 to 185°F) |
| Regulatory Approvals | EN55022, EN55024, EN61000-3-2, EN61000-3-3, EN61000-6-2, IEC-61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11, FCC Part 15 Class B |
| Power Requirements | |
| Power Consumption | 430 mA @ 3.3 V |
| ESD Protection | 15 KV on the board |
| Warranty | |
| Warranty Period | 5 years |
Specification
| Power Requirements | |
| Power Consumption | CP-114EL: 835 mA @ 3.3 V CP-114EL-I: 1170 mA @ 3.3 V |
| Serial Communication Parameters | |
| Flow Control | RTS/CTS, XON/XOFF |
| Data Bits | 5, 6, 7, 8 |
| Parity | None, Even, Odd, Space, Mark |
| Stop Bits | 1, 1.5, 2 |
| Hardware | |
| Connector | DB44 female |
| Bus | PCI Express x1 |
| Comm. Controller | 16C550C compatible |
| Performance | |
| Baudrate | 50 bps to 921.6 Kbps |
| Environmental Limits | |
| Operating Temperature | 0 to 55°C (32 to 131°F) |
| Storage Temperature | -20 to 85°C (-4 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| MTBF (mean time between failures) | |
| Time | 684,289 hrs |
| Database | Telcordia (Bellcore), GB |
| Physical Characteristics | |
| Dimensions | CP-114EL: 67.21 x 103 mm (2.69 x 4.06 in) CP-114EL-I: 67.21 x 135 mm (2.69 x 5.31 in) |
| Serial Interface | |
| Serial Standards | RS-232/422/485 |
| Number of Ports | 4 |
| Max. No. of Boards per PC | 4 |
| Serial Line Protection | |
| ESD Protection | 15 KV on the board |
| Optical Isolation | 2 KV (CP-114EL-I only) |
| Serial Signals | |
| RS-485-4w | TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND |
| RS-485-2w | Data+(B), Data-(A), GND |
| RS-422 | TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| Standards and Certifications | |
| EMI | EN 55022, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class B |
| EMS | EN 55024, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 (DIPS) |
| EMC | CE, FCC |
| Green Product | RoHS, CRoHS, WEEE |
| Driver Support | |
| Operating Systems | Windows 2000, Windows XP/2003/Vista/2008/7 x86/x64, DOS, Linux 2.4, Linux 2.6 x86/x64, QNX 6, Windows XP Embedded, SCO OpenServer 5/6, UnixWare 7, Solaris 10 x86/x64 |
| Note | Please refer to Moxa's website for the latest driver support information. |
| Warranty | |
| Warranty Period | 5 years |
| Details | See http://www.moxa.com/support/warranty.htm |
4-Port male DB44 to male DB25 connection cable, 50cm(CP-104UL/CP-134U/CP-134U-I only)
Related Products:
4 Port PCIe Board, with DB-25M cable, RS-232/422/485, with 2KV optical Isolation, Low Profile
WARNING:: The plastic used in cable products can expose you to lead and lead components,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
Manufacturer Warranty Policy:
MOXA
Moxa products are warranted to be free from manufacturing defects in materials and workmanship starting from the date of delivery. The actual warranty period of the product(s) depends on the product category.
Warranty Periods
- Warranty Period Products Category
- 5 Years Embedded RISC Box Computers
- 3 Years Embedded x86 Box Computers
- 2 Years Ethernet I/O Products
- 5 Years Industrial Ethernet Switches
- 5 Years Media Converters
- 5 Years Serial to Ethernet Products
- 5 Years USB to Serial Hubs
- 5 Years Video over IP Servers
- 5 Years Wireless Ethernet Products
* The 3-year warranty period for Embedded x86 Box Computers is effective for products shipped after Jan. 1, 2010. A 5-year warranty still applies to products shipped before 2010.
* For products containing storage devices (hard drives, flash drives, etc.), back up your data before sending the products for repair. Moxa is not responsible for any loss of data. Please ensure the use of properly licensed software with our systems. Moxa does not condone the use of pirated software and will not service systems using such software. Moxa will not be held legally responsible for products shipped with unlicensed software installed by the user.
* If the customer opens the computer to install an HDD without making any modifications to the unit, the warranty will remain valid.
- Warranty Period Accessories
- 3 Years SFP Ethernet Modules
- 3 Years DIN-Rail Power Supplies
- 1 Years Power Adaptors
- 1 Years Fiber Patch Cords, SC to ST Duplex Adaptors
- 5 Years Serial Connection Boxes
- 5 Years Serial Connection Cables
- Oiginal manufacturers' warranty period. Hard Drives
Product warranties remain valid provided the product was properly installed and used. Defects, malfunctions, or failures of the warranted product caused by damage resulting from acts of God (such as floods, fire, etc.), environmental and atmospheric disturbances, other external forces such as power line disturbances, host computer malfunction, plugging the board in under power, or incorrect cabling, and damage caused by misuse, abuse, and unauthorized alteration or repair, are not warranted. A product will not be warranted in the following situations:
- The product has been found to be defective after the warranty period has expired.
- The product has been subjected to misuse, abuse, or unauthorized repair, whether by accident or other cause. Such conditions will be determined by Moxa at its sole and unfettered discretion.
- The warranty for customized and ODM products is defined by contract, and is excluded from this policy.
- The product is an accessory not carrying the Moxa brand name. In this case, warranties are limited to the warranty provided by the original manufacturer of the accessory. Examples of such products and accessories are power adaptors and cables.
- The product has been updated, reworked, or improperly tested by the customer, or by a third party at the request of the customer.
- The product is damaged beyond repair due to natural disasters, such as by lightning, flood, earthquake, etc.
- The product in question is either software, or an expendable item, such as a fuse, battery, SD/ CF card, RAM/ DOM module, etc.
- Products with altered and/or damaged serial numbers are not entitled to ourwill not be serviced by Moxa.
This warranty is limited to the repair and/or replacement, at Moxa's sole discretion, of the defective product during its warranty period. Moxa will replace any product found to be defective within the first three months of purchase provided said product was properly installed and used. The customer must obtain a Return Merchandise Authorization (RMA) number prior to returning the defective product to Moxa for service.
The customer agrees to insure the product or assume the risk of loss or damage during transit, to prepay shipping charges, and to use the original shipping container or equivalent. Customers may either seek assistance from the original dealer, or from the closest Moxa Service Office. Repaired or replaced products are warranted for ninety (90) days from the date of repair or replacement, or for the remainder of the original product's warranty period, whichever is longer. For large order projects, customers may purchase an extended maintenance contract. Such products may have a shorter chipset life cycle, or some parts may have a limited warranty from the original supplier of the parts. Please contact Moxa's sales department if you would like to extend the maintenance period of a Moxa product.
Limitation of Liability
The provisions of the warranty are in lieu of any other warranty, whether expressed or implied, written or oral. Moxa's liability arising out of the manufacture, sale, or supplying of the product and its use, whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the original cost of the product. In no event shall Moxa be liable for unintended or consequential damages, including, but not limited to, a loss of profits or use damages arising out of the manufacture, sale, or supplying of the product.
