Moxa Mfg Mini-Store MOXA Major Lines Selector
Moxa EDS-G308-2SFP Unmanaged full Gigabit Ethernet switch with 6 10/100/1000BaseT(X) ports and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C
MOXA Major LinesMfg Part Number: EDS-G308-2SFP , Item #: 952944
In Stock: 4
, PO and Wire.
Certifications: ABSATEXCB(IEC 60950-1)DNVEN 55032/EN 55024FCC Part 15BGLLRNKKRoHSUL508UL508 CID2
- 8 Gigabit Ethernet ports
- Fiber optic options for extending distance and electrical noise immunity
- Redundant dual 12/24/48 VDC, 18 to 30 VAC power inputs
- Relay output warning for power failure and port break alarm
- Broadcast storm protection
- -40 to 75°C operating temperature range (T models)
| Technology: | |
| Standards | IEEE 802.3 for
10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base FX, IEEE 802.3ab for 1000Base(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, IEEE 802.3x for Flow Control |
| Processing Type | Store and Forward |
| Flow Control | IEEE 802.3x flow
control, back pressure flow control |
| Interface: | |
| RJ45 Ports | 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| Fiber Port(s) | 100/1000BaseSFP slot |
| LED Indicators | PWR1, PWR2, FAULT, 10/100/1000M |
| DIP Switches | Port break alarm mask |
| Alarm Contact | One relay output with current carrying capacity of 1A @ 24 VDC |
| Physical Characteristics: | |
| Housing | IP30 protection, metal case |
| Dimensions | 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) |
| Installation | DIN-Rail mounting, wall mounting (optional kit) |
| Environmental Limits: | |
| Operating Temperature | 0 to 60°C (32
to 140°F), -40 to 75°C (-40 to 167°F) for T models |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Power Requirements: | |
| Input Voltage | 12/24/48 VDC (9.6
to 60 VDC), 24 VAC (18 to 30 VAC)(47 to 63 Hz) redundant inputs |
| Input Current | 0.35A @ 24 VDC |
| Connection | Removable 6-pin terminal block |
| Reverse Polarity Protection | Present |
| Regulatory Approvals | |
| Safety | UL508 (Pending) |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | EN61000-4-2 (ESD),
level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 |
| Hazardous Location | UL/cUL Class 1,
Division 2, Groups A, B, C and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending) |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
| Maritime | DNV (Pending), GL (Pending) |
| Warranty: | |
| Warranty Period | 5 years |
| Product Category | |
| Product Category | Unmanaged Switch |
| Mechanical | |
| Dimensions: WxHxD (mm) | 50.3mm x 115mm x 70mm |
| Mounting | Din Rail |
| IP level | IP30 |
| Enclosure | Metal |
| Data Rate and Number of Ports | |
| Number of Ports | 8 |
| Fast Ethernet, 10/100 Mbps | - |
| Gigabit, 10/100/1000 Mbps | 8 |
| Interface | |
| Interface Type | 10/100/1000 Mbps RJ45, 10/100/100 Mbps SFP Combo |
| Fiber connector | - |
| PoE | - |
| M12 Connector | - |
| SFP | - |
| Digital I/O/Relay | - |
| Console | - |
| Bypass | - |
| Modular Design | - |
| Available Modular | - |
| Power | |
| Power Input Type | Redundant DC/DC Terminal Block |
| Operating Supply Voltage | 48VDC |
| Power Consumption | 1.6A @ 48VDC |
| Reliability | |
| Operating Temperature | 0C to 60C |
| Redundancy and Backup Options | |
| Redundancy Technology | Yes |
| STP/RSTP/PSTP/MSTP | - |
| Automatic Backup Configurator | Yes |
| Certification | |
| Certification | - |
| UL 508 (Industrial Control) | - |
| EN 50155 (Rail Industry) | - |
| EN 50121-4 (Rail Industry) | - |
| EN 50121-3-2 (Rail Industry) | - |
| NEMA TS2 (ITS) | - |
| IEC 61850-3 (Power Industry) | - |
| IEEE 1613 (Power Industry) | - |
| IEEE 1588PTP (Power Industry) | - |
| DNV.GL (Marine) | - |
| ABS.LR.NK (Marine) | - |
| C1D2 (Oil & Gas) | - |
| ATEX (Oil & Gas) | - |
| Network Management and Control | |
| Layer Level Switching | L2 |
| Modbus/TCP | - |
| Ethernet/IP | - |
| PROFINET | - |
| SNMP/RMON | - |
| LLDP | - |
| DHCP | - |
| IGMP Snooping/GMRP | - |
| QoS | - |
| VLAN 802.1Q | - |
| IEEE 802.1X | - |
| LACP (802.3ad) | - |
| Port Lock | - |
| IPv6 | - |
Specification
| Interface | |
| DIP Switches | One for port break alarm, one for Enable/Disable broadcast storm protection and jumbo frame |
| Fiber Ports | 100/1000BaseSFP slot (EDS-G308-2SFP series only) |
| LED Indicators | PWR1, PWR2, FAULT, 10/100/1000M |
| Alarm Contact | 1 relay output with current carrying capacity of 1 A @ 24 VDC |
| RJ45 Ports | 10/100/1000BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
| Power Requirements | |
| Reverse Polarity Protection | Present |
| Input Voltage | 12/24/48 VDC (9.6 to 60 VDC), redundant dual inputs |
| Input Current | EDS-G308: 0.32 A @ 24 V EDS-G308-2SFP: 0.34 A @ 24 V |
| Connection | 1 removable 6-contact terminal block |
| Technology | |
| Standards | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX IEEE 802.3x for Flow Control |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| Processing Type | Store and Forward |
| Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| MTBF (mean time between failures) | |
| Time | 478,000 hrs |
| Database | Telcordia (Bellcore), GB (EDS-G308 series) |
| Physical Characteristics | |
| Weight | 630 g |
| Dimensions | 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) |
| Installation | DIN-Rail mounting, wall mounting (with optional kit) |
| Housing | Metal, IP30 protection |
| Switch Properties | |
| Jumbo Frame Size | 9.6 KB |
| MAC Table Size | 8 K |
| Packet Buffer Size | 1088 Kbit (EDS-G205), 1408 Kbit (EDS-G308) |
| Standards and Certifications | |
| EMI | FCC Part 15 Subpart B Class A, EN 55022 Class A |
| Safety | UL 508 |
| Hazardous Location | UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2 Ex nC IIC |
| Note | Please check Moxa’s website for the most up-to-date certification status. |
| Shock | IEC 60068-2-27 |
| Vibration | IEC 60068-2-6 |
| EMS | EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3 |
| Freefall | IEC 60068-2-32 |
| Marine | DNV, GL, LR, ABS, NK |
| Warranty | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
WARNING:: The plastic used in cable products can expose you to lead and lead components,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
Manufacturer Warranty Policy:
MOXA
Moxa products are warranted to be free from manufacturing defects in materials and workmanship starting from the date of delivery. The actual warranty period of the product(s) depends on the product category.
Warranty Periods
- Warranty Period Products Category
- 5 Years Embedded RISC Box Computers
- 3 Years Embedded x86 Box Computers
- 2 Years Ethernet I/O Products
- 5 Years Industrial Ethernet Switches
- 5 Years Media Converters
- 5 Years Serial to Ethernet Products
- 5 Years USB to Serial Hubs
- 5 Years Video over IP Servers
- 5 Years Wireless Ethernet Products
* The 3-year warranty period for Embedded x86 Box Computers is effective for products shipped after Jan. 1, 2010. A 5-year warranty still applies to products shipped before 2010.
* For products containing storage devices (hard drives, flash drives, etc.), back up your data before sending the products for repair. Moxa is not responsible for any loss of data. Please ensure the use of properly licensed software with our systems. Moxa does not condone the use of pirated software and will not service systems using such software. Moxa will not be held legally responsible for products shipped with unlicensed software installed by the user.
* If the customer opens the computer to install an HDD without making any modifications to the unit, the warranty will remain valid.
- Warranty Period Accessories
- 3 Years SFP Ethernet Modules
- 3 Years DIN-Rail Power Supplies
- 1 Years Power Adaptors
- 1 Years Fiber Patch Cords, SC to ST Duplex Adaptors
- 5 Years Serial Connection Boxes
- 5 Years Serial Connection Cables
- Oiginal manufacturers' warranty period. Hard Drives
Product warranties remain valid provided the product was properly installed and used. Defects, malfunctions, or failures of the warranted product caused by damage resulting from acts of God (such as floods, fire, etc.), environmental and atmospheric disturbances, other external forces such as power line disturbances, host computer malfunction, plugging the board in under power, or incorrect cabling, and damage caused by misuse, abuse, and unauthorized alteration or repair, are not warranted. A product will not be warranted in the following situations:
- The product has been found to be defective after the warranty period has expired.
- The product has been subjected to misuse, abuse, or unauthorized repair, whether by accident or other cause. Such conditions will be determined by Moxa at its sole and unfettered discretion.
- The warranty for customized and ODM products is defined by contract, and is excluded from this policy.
- The product is an accessory not carrying the Moxa brand name. In this case, warranties are limited to the warranty provided by the original manufacturer of the accessory. Examples of such products and accessories are power adaptors and cables.
- The product has been updated, reworked, or improperly tested by the customer, or by a third party at the request of the customer.
- The product is damaged beyond repair due to natural disasters, such as by lightning, flood, earthquake, etc.
- The product in question is either software, or an expendable item, such as a fuse, battery, SD/ CF card, RAM/ DOM module, etc.
- Products with altered and/or damaged serial numbers are not entitled to ourwill not be serviced by Moxa.
This warranty is limited to the repair and/or replacement, at Moxa's sole discretion, of the defective product during its warranty period. Moxa will replace any product found to be defective within the first three months of purchase provided said product was properly installed and used. The customer must obtain a Return Merchandise Authorization (RMA) number prior to returning the defective product to Moxa for service.
The customer agrees to insure the product or assume the risk of loss or damage during transit, to prepay shipping charges, and to use the original shipping container or equivalent. Customers may either seek assistance from the original dealer, or from the closest Moxa Service Office. Repaired or replaced products are warranted for ninety (90) days from the date of repair or replacement, or for the remainder of the original product's warranty period, whichever is longer. For large order projects, customers may purchase an extended maintenance contract. Such products may have a shorter chipset life cycle, or some parts may have a limited warranty from the original supplier of the parts. Please contact Moxa's sales department if you would like to extend the maintenance period of a Moxa product.
Limitation of Liability
The provisions of the warranty are in lieu of any other warranty, whether expressed or implied, written or oral. Moxa's liability arising out of the manufacture, sale, or supplying of the product and its use, whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the original cost of the product. In no event shall Moxa be liable for unintended or consequential damages, including, but not limited to, a loss of profits or use damages arising out of the manufacture, sale, or supplying of the product.
