TS256MLK72V3U Transcend 2GB DDR3 SDRAM Memory Module

The TS256MLK72V3U is a 256M x 72bits DDR3-1333 ECC Unbuffered-DIMM. The TS256MLK72V3U consists of 18pcs 128Mx8bits DDR3 SDRAMs in FBGA packages and a 2048 bits serial EEPROM on a 240-pin printed circuit board. The TS256MLK72V3U is a Dual In-Line Memory Module and is intended for mounting into 240-pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.

General Information
Manufacturer	Transcend Information, Inc
Manufacturer Part Number	TS256MLK72V3U
Manufacturer Website Address	http://www.transcend-info.com
Brand Name	Transcend
Product Name	2GB DDR3 SDRAM Memory Module
Product Type	RAM Module
Technical Information
Memory Size	2 GB
Memory Technology	DDR3 SDRAM
Memory Speed	1333 MHz
Memory Standard	DDR3-1333/PC3-10600
Error Checking	ECC
Signal Processing	Unbuffered
Device Supported	Server
Physical Characteristics
Number of Pins	240-pin
Form Factor	DIMM
Thickness	50 mil
Width	1.2"
Length	5.3"
Miscellaneous
Compatibility	Server
Environmentally Friendly	Yes
Warranty
Limited Warranty	Lifetime

The TS256MLK72V3U is a 256M x 72bits DDR3-1333 ECC Unbuffered-DIMM. The TS256MLK72V3U consists of 18pcs 128Mx8bits DDR3 SDRAMs in FBGA packages and a 2048 bits serial EEPROM on a 240-pin printed circuit board. The TS256MLK72V3U is a Dual In-Line Memory Module and is intended for mounting into 240-pin edge connector sockets.
Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.

• RoHS compliant products.
• JEDEC standard 1.5V ± 0.075V Power supply
• VDDQ=1.5V ± 0.075V
• Clock Freq: 667MHZ for 1333Mb/s/Pin.
• Programmable CAS Latency: 6, 7, 8, 9
• Support ECC error detection and correction.
• Programmable Additive Latency (Posted /CAS): 0, CL-2 or CL-1 clock
• Programmable /CAS Write Latency (CWL) = 7
• 8 bit pre-fetch
• Burst Length: 4, 8
• Bi-directional Differential Data-Strobe
• Internal calibration through ZQ pin
• On Die Termination with ODT pin
• Serial presence detect with EEPROM
• Asynchronous reset
• On DIMM Thermal Sensor support

Download DataSheet