Moxa Mfg Mini-Store MOXA Major Lines
Moxa TCF-142-S-SC RS-232/422/485 to Fiber Optic Single mode Converter with SC Connecters
MOXA Major LinesMfg Part Number: TCF-142-S-SC , Item #: 880223
In Stock: 18
, PO and Wire.
The TCF-142 media converter is equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multi-mode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.
Features and Benefits
- "Ring" and "Point-to-Point"
transmission
- Profibus and GE Genius bus
compatible models available
- Extends RS-232/422/485 transmission
up to:
- 40 km with single-mode—TCF-142-S
- 5 km with multi-mode—TCF-142-M
- 40 km with single-mode—TCF-142-S
- Compact size
- Decreases signal interference
- Protects against electrical
interference and chemical corrosion
- Supports baudrates of 300 bps to
921.6 Kbps (can be upgraded to 20 Mbps)
- Wide temperature models available (-40 to 75°C)
| RS-232/422/485 Side | |
| Connector(s) | Terminal Block |
| RS-232 Signals | Tx, Rx, GND |
| RS-422 Signals | TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-4w Signals | TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-2w Signals | Data+, Data-, GND |
| Baudrate | 300 bps to 921.6 Kbps |
| ESD Protection | 15 KV for all signals |
| Optical Fiber | |
| Fiber Connector | SC or ST |
| Cable Requirements | Single-mode:
8.3/125, 8.7/125, 9/125, or 10/125 ?m Multi-mode: 50/125, 62.5/125, or 100/140 ?m |
| Transmission Distance | Single-mode: 40 km Multi-mode: 5 km |
| Wavelength | Single-mode: 1310
nm Multi-mode: 820 nm |
| Tx Output | Single-mode: >
-5 dBm Multi-mode: > -5 dBm |
| RX Sensitivity | Single-mode: -25
dBm Multi-mode: -20 dBm |
| Point-to-Point Transmission | Half-duplex or full-duplex |
| Ring Transmission | Half-duplex |
| Physical Characteristics | |
| Enclosure | Aluminum (1 mm) |
| Dimensions | Without ears: 67 x
100 x 22 mm (2.64 x 3.94 x 0.87 in) With ears: 90 x 100 x 22 mm (3.54 x 3.94 x 0.87 in) |
| Environmental Limits | |
| Operating Temperature | Standard Models: 0
to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Operating Humidity | 5 to 95% RH |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Power Requirements | |
| Input Voltage | 12 to 48 VDC |
| Power Consumption | 140 mA @ 12 V |
| Voltage Reversal Protection | Protects against V+/V- reversal |
| Power Line Protection | 2 KV Burst (EFT),
EN61000-4-4 2 KV Surge, EN61000-4-5 |
| Over Current Protection | 1.1 A (protects against two signals shorted together) |
| Regulatory Approvals | |
| EMI | EN55022 1998, Class B |
| EMS | EN61000-4-2 (ESD),
Criteria A, Level 2 EN61000-4-3 (RS), Criteria A, Level 2 EN61000-4-4 (EFT), Criteria A, Level 2 EN61000-4-5 (Surge), Criteria A, Level 3 EN61000-4-6 (CS), Criteria A, Level 2 EN61000-4-11(DIPS), Criteria A, Level 2 |
| UL/CUL | UL60950-1 |
| TUV | EN60950-1 |
| FCC | Part 15 Subclass B |
| Warranty | |
| Warranty Period | 5 years |
Specification
| Power Requirements | |
| Power Consumption | 140 mA @ 12 V |
| Input Voltage | 12 to 48 VDC |
| Voltage Reversal Protection | Protects against V+/V- reversal |
| Over Current Protection | 1.1 A (protects against two signals shorted together) |
| Power Line Protection | 2 KV Burst (EFT), EN61000-4-4 2 KV Surge, EN61000-4-5 |
| Optical Fiber Side | |
| Wavelength | Single-mode: 1310 nm Multi-mode: 850 nm |
| Transmission Distance | Single-mode: 40 km Multi-mode: 5 km |
| Rx Sensitivity | Single-mode: -25 dBm Multi-mode: -20 dBm |
| Fiber Connector | SC or ST |
| Tx Output | Single-mode: > -5 dBm Multi-mode: > -5 dBm |
| Cable Requirements | Single-mode: 8.3/125, 8.7/125, 9/125, or 10/125 μm Multi-mode: 50/125, 62.5/125, or 100/140 μm |
| Point-to-Point Transmission | Half-duplex or full-duplex |
| Ring Transmission | Half-duplex |
| Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 75°C (-40 to 167°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| MTBF (mean time between failures) | |
| Time | 780,480 hrs |
| Database | Telcordia (Bellcore), GB |
| RS-232/422/485 Side | |
| Connector | Terminal Block |
| ESD Protection | 15 KV for all signals |
| RS-422 Signals | TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-4w Signals | TxD+, TxD-, RxD+, RxD-, GND |
| RS-232 Signals | Tx, Rx, GND |
| RS-485-2w Signals | Data+, Data-, GND |
| Baudrate | 50 bps to 921.6 Kbps |
| Physical Characteristics | |
| Weight | 320 g |
| Dimensions | Without ears: 67 x 100 x 22 mm (2.64 x 3.94 x 0.87 in) With ears: 90 x 100 x 22 mm (3.54 x 3.94 x 0.87 in) |
| Housing | Aluminum (1 mm) |
| Standards and Certifications | |
| EMI | FCC Part 15 Subpart B Class B, EN 55022 Class B |
| Safety | UL 60950-1 |
| EMS | EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 2, EN 61000-4-4 (EFT) Level 2, EN 61000-4-5 (Surge) Level 2, EN 61000-4-6 (CS) Level 2, EN 61000-4-8 (SFMF) Level 1 |
| EMC | CE, FCC |
| Green Product | RoHS, CRoHS, WEEE |
| Warranty | |
| Warranty Period | 5 years |
| Details | See http://www.moxa.com/support/warranty.htm |
WARNING:: The plastic used in cable products can expose you to lead and lead components,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
Manufacturer Warranty Policy:
MOXA
Moxa products are warranted to be free from manufacturing defects in materials and workmanship starting from the date of delivery. The actual warranty period of the product(s) depends on the product category.
Warranty Periods
- Warranty Period Products Category
- 5 Years Embedded RISC Box Computers
- 3 Years Embedded x86 Box Computers
- 2 Years Ethernet I/O Products
- 5 Years Industrial Ethernet Switches
- 5 Years Media Converters
- 5 Years Serial to Ethernet Products
- 5 Years USB to Serial Hubs
- 5 Years Video over IP Servers
- 5 Years Wireless Ethernet Products
* The 3-year warranty period for Embedded x86 Box Computers is effective for products shipped after Jan. 1, 2010. A 5-year warranty still applies to products shipped before 2010.
* For products containing storage devices (hard drives, flash drives, etc.), back up your data before sending the products for repair. Moxa is not responsible for any loss of data. Please ensure the use of properly licensed software with our systems. Moxa does not condone the use of pirated software and will not service systems using such software. Moxa will not be held legally responsible for products shipped with unlicensed software installed by the user.
* If the customer opens the computer to install an HDD without making any modifications to the unit, the warranty will remain valid.
- Warranty Period Accessories
- 3 Years SFP Ethernet Modules
- 3 Years DIN-Rail Power Supplies
- 1 Years Power Adaptors
- 1 Years Fiber Patch Cords, SC to ST Duplex Adaptors
- 5 Years Serial Connection Boxes
- 5 Years Serial Connection Cables
- Oiginal manufacturers' warranty period. Hard Drives
Product warranties remain valid provided the product was properly installed and used. Defects, malfunctions, or failures of the warranted product caused by damage resulting from acts of God (such as floods, fire, etc.), environmental and atmospheric disturbances, other external forces such as power line disturbances, host computer malfunction, plugging the board in under power, or incorrect cabling, and damage caused by misuse, abuse, and unauthorized alteration or repair, are not warranted. A product will not be warranted in the following situations:
- The product has been found to be defective after the warranty period has expired.
- The product has been subjected to misuse, abuse, or unauthorized repair, whether by accident or other cause. Such conditions will be determined by Moxa at its sole and unfettered discretion.
- The warranty for customized and ODM products is defined by contract, and is excluded from this policy.
- The product is an accessory not carrying the Moxa brand name. In this case, warranties are limited to the warranty provided by the original manufacturer of the accessory. Examples of such products and accessories are power adaptors and cables.
- The product has been updated, reworked, or improperly tested by the customer, or by a third party at the request of the customer.
- The product is damaged beyond repair due to natural disasters, such as by lightning, flood, earthquake, etc.
- The product in question is either software, or an expendable item, such as a fuse, battery, SD/ CF card, RAM/ DOM module, etc.
- Products with altered and/or damaged serial numbers are not entitled to ourwill not be serviced by Moxa.
This warranty is limited to the repair and/or replacement, at Moxa's sole discretion, of the defective product during its warranty period. Moxa will replace any product found to be defective within the first three months of purchase provided said product was properly installed and used. The customer must obtain a Return Merchandise Authorization (RMA) number prior to returning the defective product to Moxa for service.
The customer agrees to insure the product or assume the risk of loss or damage during transit, to prepay shipping charges, and to use the original shipping container or equivalent. Customers may either seek assistance from the original dealer, or from the closest Moxa Service Office. Repaired or replaced products are warranted for ninety (90) days from the date of repair or replacement, or for the remainder of the original product's warranty period, whichever is longer. For large order projects, customers may purchase an extended maintenance contract. Such products may have a shorter chipset life cycle, or some parts may have a limited warranty from the original supplier of the parts. Please contact Moxa's sales department if you would like to extend the maintenance period of a Moxa product.
Limitation of Liability
The provisions of the warranty are in lieu of any other warranty, whether expressed or implied, written or oral. Moxa's liability arising out of the manufacture, sale, or supplying of the product and its use, whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the original cost of the product. In no event shall Moxa be liable for unintended or consequential damages, including, but not limited to, a loss of profits or use damages arising out of the manufacture, sale, or supplying of the product.
