ADVANTECH  Selector

EKI-2526M-AE Advantech 4+2 100FX Port Unmanaged Industrial Ethernet Switch - 6 Ports - Fast Ethernet - 10/100Base-TX, 100Base-FX - 2 Layer Supported - Twisted Pair, Optical Fiber - Wall Mountable, Rail-mountable - 5 Year Limited Warranty

Mfg Part Number:  EKI-2526M-AE  
Image may not reflect the actual item.
Price: $435.73
Quantity:
In Stock: 6
No Sales Tax except these states
, PO and Wire.
Manufacturer Warranty Policy:
EKI-2525M/2526M/2526S are industrial-grade Ethernet switches that enable you to expand your industrial network fast and cost-effectively. The EKI-2525M/2526M/2526S have four 10/100Mbps Ehernet ports, and additionally the EKI-2525M/2526M provides one or two multi-mode fiber-optic ports, while the EKI-2526s provides two single-mode fiber-optic ports. Using fiber-optic, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 30 km) transmissions.
EKI-2525M/2526M/2526S haveindustrial-grade designs, assuring high reliability and stability in harsh environments, making it a robust bridge between enterprise fiber-optic backbones and Ethernet devices. EKI-2525M/2526M/2526S inclubes a switch controller that can automatically sense transmission speeds. The RJ-45 interface can also be auto-Detected, so MDI or MDI-X is automatically selected and a crossover cable is not required. All the Ethernet prots have memory buffers that support the store and forward mechanism, assuring all data is transmitted properly.

Features
  • Provides 4 x 10/100 Mbps Ethernet ports with FJ-45 connector
  • Provides 1 x 100 Mbps multi-mode SC type fiber port
  • Provides 2 x 100 Mbps multi-mode SC type fiber-optic port
  • Provides 2 x 100 Mbps single-mode SC type fiber-optic port
  • Supports full/half duplex flow control
  • Supports MDI/MDI-X auto crossover
  • Provides 3,000 VDC surge (EFT) protection
  • Provides 4,000 VDC Ethernet ESD protection
  • Provides broadcast storm protection
  • Provides Redundant 12 ~ 48 VDC power input
  • Provides flexible mounting: DIN-rail Panel mounting
Specifications
General Ethernet Connectors 4xRJ45 + 2xSC
type fiber connector
Mounting DIN-rail, Wall
I/O Transmission Distance Ethernet: Up to 100m
Multi-mode Fiber:Up to 2 km
Transmission Speed UP to 100 Mbps
Operating System Operating Temperature -10 ~ 60°C (14 ~ 140°F)
Power Supply Power Connector 6-pin removable
screw terminal
Power Input 2 x Unregulated
12 ~ 48 VDC
Product Category
Product Category Unmanaged Switch
Mechanical
Dimensions: WxHxD (mm) 37mm x 140mm x 95mm
Mounting Din Rail, Wall Mount
IP level IP30
Enclosure Metal
Data Rate and Number of Ports
Number of Ports 6
Fast Ethernet, 10/100 Mbps 4
Gigabit, 10/100/1000 Mbps -
Interface
Interface Type 10/100 Mbps RJ45, 100 Mbps Multi-mode SC
Fiber connector 2 Multi-mode SC
PoE -
M12 Connector -
SFP -
Digital I/O/Relay Yes
Console -
Bypass -
Modular Design -
Available Modular -
Power
Power Input Type Dual DC/ DC Terminal Block
Operating Supply Voltage 12 to 48VDC
Power Consumption Max. 6.41W
Reliability
Operating Temperature -10C to 60C
Redundancy and Backup Options
Redundancy Technology Yes
STP/RSTP/PSTP/MSTP -
Automatic Backup Configurator -
Certification
Certification -
UL 508 (Industrial Control) -
EN 50155 (Rail Industry) -
EN 50121-4 (Rail Industry) -
EN 50121-3-2 (Rail Industry) -
NEMA TS2 (ITS) -
IEC 61850-3 (Power Industry) -
IEEE 1613 (Power Industry) -
IEEE 1588PTP (Power Industry) -
DNV.GL (Marine) -
ABS.LR.NK (Marine) -
C1D2 (Oil & Gas) -
ATEX (Oil & Gas) -
Network Management and Control
Layer Level Switching L2
Modbus/TCP -
Ethernet/IP -
PROFINET -
SNMP/RMON -
LLDP -
DHCP -
IGMP Snooping/GMRP -
QoS -
VLAN 802.1Q -
IEEE 802.1X -
LACP (802.3ad) -
Port Lock -
IPv6 -
WARNING:: The plastic used in cable products can expose you to lead and lead components, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
[0] [true] [Yes] [No] [No]