K-1705-3 Viking Electronics Video Entry Phone with Keypad

The K-1705-3 provides a tough and attractive handsfree phone for apartment, and residential door/gate entry or applications requiring a vandal resistant speaker phone with built-in color CCTV video camera.

When the "Call" button is pressed, the K-1705-3 returns dial tone. The keypad may then be used to dial any number. If no Touch Tone is entered within 8 seconds, CPC is detected, a busy signal is detected, or the programmable maximum call time has elapsed, the K-1705-3 will automatically disconnect. Alternatively, the K-1705-3 may be disconnected by pressing the "Call" button again. The K-1705-3 features a built-in high resolution color video camera, microphone and speaker volume controls, selectable auto answer for monitoring, a yellow "In-Use" LED and comes complete with a standard flush mount rough-in box. In addition, an optional VE-6x7 weather resistant surface mount box is available.

For extreme outdoor environments or corrosive atmospheres, the K-1705-3 is available with Enhanced Weather Protection (EWP). EWP products feature rubber gaskets and boots, closed cell foam gasketing, hand soldered silicon sealed connections, anti-corrosive gel filled butt connectors, as well as urethane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches.

General Information
Manufacturer	Viking Electronics, Inc
Manufacturer Part Number	K-1705-3
Manufacturer Website Address	http://www.vikingelectronics.com
Brand Name	Viking Electronics
Product Name	Video Entry Phone with Keypad
Product Type	Keypad Access Device
Technical Information
Identification Method	Key Code
Application/Usage	Door
Features	Voice Indication
Features	Weather Proof
Display & Graphics
Display Screen Type	LED
Camera
Image Sensor Type	CMOS
Controls/Indicators
Indicators & Controls	Selectable push button disconnect
Power Description
Input Voltage	20 V DC
Input Current	20 mA
Physical Characteristics
Product Material	Stainless Steel
Miscellaneous
Additional Information	Residential gate or door entry phone when used with the C-2000A Door Entry Controller Courtesy and customer assistance phone Automated teller (ATM) phone Security or emergency phone Hot-Line phone when used with the K-1900-5 Hot-Line Dialer Note: When installing a line powered phone on a low voltage and/or low loop current phone system extension, a TBB-1A Talk Battery Booster may be required (Fax Back # 630). Built-in high resolution color video camera with wide viewing, tilt/swivel adjustments and wide operating temperature of -30°F to 150°F Audio and video transmission on one CAT5E cable Vandal Resistant Features: 14 gauge louvered stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal keypad and "Call" button, impact and scratch resistant camera lens and hex drive mounting screws Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch and keypad, sealed camera lens, potted camera circuit board, stainless steel phone and camera mounting hardware Optional Enhanced Weather Protection (EWP) conforms to NEMA requirements Yellow "in use" LED Volume adjustments for microphone and speaker Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC reorder tone, maximum call time out and selectable silence time out Selectable auto-answer feature for monitoring Optional VE-6x7 surface mount box available Selectable maximum call time Selectable VOX switching speed Camera Specifications: Power: 5-9V DC regulated 150mA (6V DC adapter included) Image Sensor: 1/4" color CMOS Video Output: 1 VP-P composite, NTSC, 75 ohms Resolution: 420 lines (640 x 480 @ 30fps / 307,200 pixels) Sensitivity: 0.26 LUX (20 IRE) F 2.0 Lens: 3.4mm, pinhole 70° FOV (Field of View) Tilt/Swivel Adjustment: Vertical +/- 20°, horizontal +/- 30° Maximum Wire Run Length: 1000 ft with *RG59/RG6 for video and CAT5 for power (doubled pairs) and entry phone audio. 150 ft with CAT5E for video, power and entry phone audio Entry Phone / Camera Specifications: Operating Temperature: -34° C to 65° C (-30° F to 150° F) Humidity: Standard model: 5% to 95% non-condensing, EWP model: Up to 100% Connections: Standard model: (3) gel-filled butt connectors (3M Scotchlok UR2) and 2-position terminal block, EWP model: (5) gel-filled butt connectors (3M Scotchlok UR2)
Warranty
Limited Warranty	2 Year

Download DataSheet