PERLE
PERLE 07017850 IDS-114HP POE 90W SWITCH 8X10/100/1000BASE-T 2XSFP
Mfg Part Number: 07017850 , Item #: 5021054
, PO and Wire.
Perle IDS-114HP PoE Switches are designed for easy deployment in challenging industrial environments where extensive temperature tolerance, resistance to vibrations and shocks, and compliance with stringent safety standards are required. This low-cost, easy-to-use device combines essential industrial Ethernet networking functionality, real-time deterministic network operation, and advanced rugged performance. While it requires no configuration and will operate instantly as soon as you power it up, the built-in QoS (Quality of Service) support for EtherNet/IP and PROFINET allows for traffic prioritization and effective management of resources.
This versatile switch features full/half-duplex auto-negotiation and auto MDI/MDIX operation, allowing for convenient connection of various network devices. The two SFP fiber ports enable flexible network configurations using SFP transceivers supplied by Perle, Cisco, or other manufacturers of MSA- compliant SFPs.
In addition, these PoE Switches are classified as Power Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, the IDS-114HP has four ports that provide up to 90 watts of power to Powered Devices (PDs) such as outdoor PTZ dome cameras, wireless access points, and way-side communication devices.
A built-in watchdog feature enables the IDS-114HP switch to operate as an intelligent device to prevent packet loss from powered devices (PDs) in the network. If a PD becomes unresponsive, the IDS-114HP will reboot the device without interrupting other PDs connected to the switch. The IDS-114HP also provides a relay output contact that triggers an immediate alarm when redundant power fails.
Each component within these industrial-grade switches is specialized with overbuilt hardware and chips, ensuring their suitability for outdoor deployment. Their unwavering strength and resilience enable them to provide robust networking solutions, catering to the need for Fast Ethernet and Gigabit networks. They provide the necessary reliability and durability for industrial settings where dependability and high-speed connectivity are crucial. Don't trust your critical communications to commercial switch products. Perle Industrial Ethernet switches give you the proven assurance that your system will keep running for years.
| General Information | |
| Manufacturer | Perle Systems, Inc |
| Manufacturer Part Number | 07017850 |
| Manufacturer Website Address | http://www.perle.com |
| Brand Name | Perle |
| Product Series | IDS-114HP |
| Product Name | 10-Port Industrial Gigabit PoE Switch |
| Product Type | Ethernet Switch |
| Technical Information | |
| Features | Fanless |
| Interfaces/Ports | |
| Total Number of Network Ports | 8 |
| Network (RJ-45) | Yes |
| Uplink Port | Yes |
| Port/Expansion Slot Details | 4 x Gigabit Ethernet PoE |
| Port/Expansion Slot Details | 4 x Gigabit Ethernet Network Port |
| Port/Expansion Slot Details | 2 x Gigabit Ethernet Expansion Slot |
| Media & Performance | |
| Media Type Supported | Twisted Pair |
| Media Type Supported | Optical Fiber |
| Ethernet Technology | Gigabit Ethernet |
| Network Technology | 10/100/1000Base-TX |
| Network Technology | 1000Base-X |
| I/O Expansions | |
| Number of Total Expansion Slots | 2 |
| Expansion Slot Type | SFP |
| Number of SFP Slots | 2 |
| Network & Communication | |
| Layer Supported | 2 |
| Networking Standards | IEEE 802.1Q |
| Networking Standards | IEEE 802.1x |
| Networking Standards | IEEE 802.3 |
| Networking Standards | IEEE 802.3ab |
| Networking Standards | IEEE 802.3u |
| Networking Standards | IEEE 802.3at |
| Networking Standards | IEEE 802.3x |
| Networking Standards | IEEE 802.3bt |
| Networking Standards | IEEE 802.3af |
| Networking Standards | IEEE 1588v2 |
| Networking Standards | IEEE 802.3az |
| Networking Standards | IEEE 802.3z |
| Management & Protocols | |
| Manageable | No |
| Power Description | |
| PoE (RJ-45) Port | Yes |
| PoE Budget | 270 W |
| Input Voltage | 52 V DC |
| Input Voltage | 57 V DC |
| Input Voltage | 46 V DC |
| Input Voltage | 54 V DC |
| Power Source | DC |
| Power Source | PoE |
| Power Source | Power Supply |
| Redundant Power Supply Supported | Yes |
| Number of Power Supplies Supported | 2 |
| Power Consumption | 9.72 W |
| Plug/Connector Type | Terminal Block |
| Physical Characteristics | |
| Product Material | Metal |
| Form Factor | DIN Rail Mountable |
| Height | 5.7" |
| Width | 1.8" |
| Depth | 4.9" |
| Weight (Approximate) | 1.27 lb |
| Miscellaneous | |
| Package Contents |
|
| Environmentally Friendly | Yes |
| Environmental Compliance | Restriction of Hazardous Substances (RoHS) |
| Environmental Compliance | Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) |
| Environmental Compliance | Waste Electrical and Electronic Equipment Directive (WEEE) |
| Warranty | |
| Limited Warranty | 5 Year |
WARNING:: The plastic used in cable products can expose you to lead and lead components,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
