MOXA  Mfg Mini-Store

Ethernet I/O Server 8AI, 2AO, Modbus/TCP, SNMP, Active I/O Messaging

Mfg Part Number:  ioLogik E2240  
Image may not reflect the actual item.
Price: $569.00 + Free Shipping
Quantity:
In Stock: 1
Sales Tax in PA,CA,MA,MD,TN,DC,CT,IL,NY,WA
, PO and Wire.
Manufacturer Warranty Policy:

Improve system efficiency via real-time data acquisition
Unlike traditional passive remote I/O, Active Remote I/O provides Active I/O messaging that can send message over Ethernet, TCP/IP network on I/O input status changes or meets certain condition, the message is sent to host computer. Communication between the host computer and Active Remote I/O device is concise and efficient. In addition, the message delivery time is 20 times faster than traditional SCADA systems (50 ms compared to 1 sec).

No programming! Hassle-free Click&Goâ„¢ logic control
Click&Goâ„¢ logic is the key to make ioLogik E2000 series become an intelligent remote I/O. Click&Goâ„¢ logic lets you decide when to send I/O data, and what to say to host computers for simple alarm control and messaging.

As opposed to using C-language or PLC-ladder, a person who understands basic logic concepts can do the configuration themselves, and easily finish their projects. Unlike passive remote I/O architecture, you can integrate Active Remote I/O’s input signals into one event to be an integrated message, and set up local output control at the same time. The unique Click&Go™ logic is a patent pending technology developed by Moxa.

Unique LCD Display Module for on-site configuration
ioLogik E2000 series Active Remote I/O provides an optional LCD display module for on-site management and configuration. The unique display module can display network and I/O settings, e.g. analog input value, digital input counter value. The IP, netmask address can be set locally without carrying a PC.

 

Independent Configuration for Multi-functional AI and AO points
Each analog input can be independently configured by voltage or current mode by software. The analog input channels support various signals ranging from +/-150 mV to +/-10V at 16-bit resolution.

Typical Application

Features
Actively transfer I/O data in real-time over Ethernet
Easy-to-use Click&Goâ„¢ Logic for local output control and messaging
8-channel analog input for mV, voltage, current signal with wire-off detection (at 4-20mA)
2-channel analog output for voltage, current actuator control
Connecting up to 10 hosts
SNMP to I/O mapping that works with Network Management System
Quick programming library for VB, VC, BCB
NIST-traceable calibration

Specifications
LAN
Ethernet
10/100 Mbps, RJ45
Protection
1.5 KV magnetic isolation
Protocol
Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, Active I/O Messaging, IP filtering
 
Serial
Interface
RS-485 (2-wire): Data+, Data-, GND
Serial Line Protection
15 KV ESD for all signals
 
Serial Communication Parameters
Parity
None
Data bits
8
Stop bits
1
Flow control
None
Speed
1200 bps to 115200 bps
Protocol
Modbus/RTU
Built-in RTC
Yes
 
Power Requirements
Power input
24 VDC nominal, 12 to 48 VDC
Power consumption
282 mA @ 24 VDC (typ.)
Field power
24 VDC nominal, up to 36 VDC
 
Mechanical Specifications
Wiring
I/O cable max. 14 AWG
 
Environmental
Operating temperature
-10 to 60°C (14 to 140°F), 5 to 95% RH
Storage temperature
-40 to 85°C (-40 to 185°F), 5 to 95%RH
Shock
IEC60068-2-27
Freefall
IEC60068-2-32
Vibration
IEC60068-2-6
 
Analog Input
Inputs
8
Resolution
16-bit
Input range
+/-150 mV, +/-500 mV, +/-5 V, +/-10 V, 0 to 20 mA, 4 to 20 mA
Data format
16-bit integer (2's complement)
Accuracy
+/- 0.1%, FSR @ 25°C, +/- 0.3%, FSR @ 0, 60ºC
Optical isolation
3K VDC
Sampling rate
10 samples/sec (voltage), 6 samples/sec (current)
Input impedance
900K Ohm
Built-in resistor for current input
125 Ohm
Overvoltage
Can withstand continuous overvoltage (protection range-10V to 10V)
 
Analog Output
Outputs
2
Resolution
12-bit
Output range
0 to 10V, 4 to 20 mA
Drive voltage
15 VDC for current output
Data format
16-bit integer (2's complement)
Accuracy
+/- 0.1%, FSR @ 25C, +/- 0.3%, FSR @ 0, 60ºC (current)
+/- 0.2%, FSR @ 25C, +/- 0.4%, FSR @ 0, 60ºC (voltage)
CMR @ 50/60 Hz
95 dB min.
Zero drift
+/- 9μV/ºC
Span drift
+/- 25 ppm/ºC
Load resistor
< 250 Ohm
 
Agency Approvals
EMI
FCC Part 15, CISPR (EN55022) Class A
EMS
IEC61000-4-2 (ESD), level 2/3
IEC61000-4-3 (RS), level 2
IEC61000-4-4 (EFT), level 2
IEC61000-4-5 (Surge), level 3
IEC61000-4-6 (CS), level 2
IEC61000-4-8 (PM), level 1
IEC61000-4-11 (Dip)
Safety
UL 508 (pending)
Warranty
2 years

Specification

Power Requirements
Power Consumption 198 mA @ 24 VDC
Power Input 24 VDC nominal, 12 to 36 VDC
Serial Communication Parameters
Flow Control None
Protocol Modbus/RTU
Data Bits 8
Parity None
Stop Bits 1
Baudrate 1200 to 115200 bps
Analog Input
Isolation 3K VDC or 2K Vrms
Input Impedance 900K ohms (min.)
Built-in Resistor for Current Input 120 ohms
Resolution 16 bits
Input Range ±150 mV, ±500 mV, ±5 V, ±10 V, 0 to 20 mA, 4 to 20 mA
Sampling Rate (all channels) • 10 samples/sec for voltage • 6 samples/sec for current
Accuracy ±0.1% FSR @ 25°C ±0.3% FSR @ -10 and 60°C
I/O Mode Voltage / Current
Inputs and Outputs
Analog Outputs 2 channels
Analog Inputs 8 channels
LAN
Protection 1.5 KV magnetic isolation
Ethernet 1 x 10/100 Mbps, RJ45
Protocols Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, HTTP, CGI, SNTP
Analog Output
Resolution 12 bits
Drive Voltage 15 VDC for current output
Accuracy ±0.1% FSR @ 25°C ±0.3% FSR @ -10 and 60°C
Output Range 0 to 10 V, 4 to 20 mA
Load Resistor Less than 250 ohms
Environmental Limits
Operating Temperature -10 to 60°C (14 to 140°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Physical Characteristics
Weight under 250 g
Dimensions 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Wiring I/O cable max. 14 AWG
Standards and Certifications
EMI FCC Part 15 Subpart B Class A, EN 55022 Class A
Safety UL 508
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
EMS IEC 61000-4, IEC 61000-6
Freefall IEC 60068-2-32
Serial Communication
Interface RS-485-2w: Data+, Data-, GND
Serial Line Protection 15 KV ESD for all signals
MTBF (mean time between failure)
Time 155,941 hrs
Database Telcordia (Bellcore)
Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty
WARNING:: The plastic used in cable products can expose you to lead and lead components, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
[0] [true] [Yes] [No] [No]