Eaton N785-INT-PSFP GB SFP FIBER TO ENET MEDIA CONVERTER POE+ 10/100/1000 MBPS

Customizable media converter extends your copper Gigabit Ethernet network connection over fiber optic cable with the addition of PoE.

Features | Customizable Media Converter Extends Power and Data to a PoE+ Device via Fiber Cable
This economical unit converts a singlemode or multimode fiber optic signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet up to 100 meters (328 feet) using Cat5e/6 cabling. The N785-INT-PSFP is ideal for providing power and data to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices.

Works in Tandem with Tripp Lite's N785-Series (Non-PoE) Media Converters
The N785-INT-PSFP lets you choose a transceiver that suits your system, while also delivering power to your PoE+ device (Tripp Lite's N286-01GSX-MDLC and N286-01GLX-SLX transceivers sold separately). It connects to a Tripp Lite N785-Series non-PoE media converter using your choice of singlemode or multimode cabling.

Supports Power over Ethernet to Save You Money and Give You More Installation Choices
PoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings.

Supports Auto-Sensing of Network Speed and Other Advanced Functions
Monitoring and controlling your network nodes is easy with the N785-INT-PSFP's advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDIX configuration. Six LEDs indicate the converter's power, PoE, Ethernet network and fiber link statuses at a glance. Link fault pass through (LFP) monitors all ports to ensure link status remains active.

Completely Plug-and-Play with No Additional Software Required for Connection
The compact metal converter is easy to install and set up with no software or drivers required. The included power supply comes with four international power cables (North America, Europe, United Kingdom, Australia) for connecting to an AC outlet with no computer or other signal source needed.

General Information
Manufacturer	Eaton Corporation
Manufacturer Part Number	N785-INT-PSFP
Manufacturer Website Address	http://www.eaton.com
Brand Name	Tripp Lite by Eaton
Product Model	N785-INT-PSFP
Product Name	N785-INT-PSFP Transceiver/Media Converter
Product Type	Transceiver/Media Converter
Interfaces/Ports
Total Number of Ports	1
Network (RJ-45)	Yes
Number of Network (RJ-45) Ports	1
Media & Performance
Media Type Supported	Optical Fiber
Media Type Supported	Twisted Pair
Fiber Mode Supported	Single-mode
Fiber Mode Supported	Multi-mode
I/O Expansions
Total Number of Expansion Slots	1.0
Expansion Slot Type	SFP (mini-GBIC)
Number of SFP Slots	1
Network & Communication
Ethernet Technology	Gigabit Ethernet
Network Technology	10/100/1000Base-T
Network Technology	1000Base-X
Power Description
Power Source	AC Adapter
Plug/Connector Type	CEE 7/16
Plug/Connector Type	BS 1363
Plug/Connector Type	AS3112
Plug/Connector Type	NEMA 5-15P
Frequency	50 Hz
Frequency	60 Hz
Physical Characteristics
Form Factor	Ceiling Mountable
Form Factor	Pole
Height	1"
Width	2.8"
Depth	3.7"
Miscellaneous
Package Contents	N785-INT-PSFP Transceiver/Media Converter External power supply (Input: 100-240V, 50/60 Hz, 1.5A; Output: 48V 1.25A) 4 x International Power Cables (North America, Europe, U.K., Australia) Owner's Manual
Environmentally Friendly	Yes
Environmental Compliance	Restriction of Hazardous Substances (RoHS)
Environmental Compliance	Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
Environmental Compliance	Waste Electrical and Electronic Equipment Directive (WEEE)
Environmental Compliance	Restriction of Hazardous Substances (RoHS) 3
Warranty
Limited Warranty	2 Year