DISTINOW 

DISTINOW 500019 MUXLAB ANALOG AUDIO BALUN

Mfg Part Number:  500019  
Image may not reflect the actual item.
Price: $47.46 + Free Shipping
Quantity:
More to Come
Last Updated: May 02, 2025
No Sales Tax except these states
, PO and Wire.

The Audio Balun allows any unbalanced analog audio signal to be trans-mitted via a single unshielded twisted pair (UTP) cable for more versatile cabling. Used in pairs, the Audio Balun eliminates costly and bulky coax cable, allowing consumer and commercial audio equipment to be connected using standard premises wiring techniques. One or two pair of baluns is required depending on whether the application is for monaural or stereo audio. The Audio Balun features screw terminals and built-in cable strain relief for ease of installation and reliable connectivity. Applications include auditoriums, arenas, schools, home theatre systems, airports, hotels, hospitals, conference rooms.

Main Specification
General Information
Manufacturer MuxLab, Inc
Manufacturer Part Number 500019
Manufacturer Website Address http://www.muxlab.com
Brand Name MuxLab
Product Name Analog Audio Balun
Product Type Audio Extender
Physical Characteristics
Transmitter Weight (Approximate) 1.50 oz
Miscellaneous
Additional Information

Environment

Unbalanced analog mono or stereo audio.

Devices

DVD, VCR, Camcorders, audio mixers, audio matrix switchers, audio splitters, audio distribution amplifiers, boosters, Hi-Fi, microphones, home theatre, and other commercial or consumer analog audio equipment

Transmission

Transparent to the user.

Bandwidth (3dB roll-off point) (400 Ω source & 50 k Ω receiver)

Up to 1,000 ft (305m): 60Hz - 20 kHz 1,000 ft (305m) to 5,000 ft (1.5 km): 100Hz - 20 kHz

Maximum Input Level

1.1Vp-p (+20 dBu, unbalanced < 1% THD)

Insertion Loss per Balun Pair

Less than 1 dB per pair over the frequency range

Common Mode Rejection (CMMR)

Greater than 60 dB @ 1 kHz

Audio Source Impedance

100 to 600 Ω

Audio Receiver Impedance

10 k Ω to 100 k Ω

Impedance Transformation Ratio

Single unit: 4:1 (source:line)

Cable - UTP

24 gauge or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz. Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHz

Connectors

One (1) RCA-Male connector Two (2) screw terminals * * Phase error sensitive. Ensure st raight-thru polarity in stereo audio applications.

Temperature

Operating: 0° to 55° C. Storage:- 20° to 85° C. Humidity: up to 95%

Enclosure

Fire retardant plastic

Dimensions

2.30" x 0.62 x 0.62 (5.8 x 1.6 x 1.6 cm)

Weight

1.5 oz (42.5 gms)

Certifications & Standards
  • FCC
  • CE
  • US Design patent # D495,320
Warranty
Limited Warranty Lifetime
WARNING:: The plastic used in cable products can expose you to lead and lead components, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
[1024] [true] [Yes] [No] [Yes]