PHYBRIDGE NV-8PS13-PVD 8-CH POWER SUPPLY PASSIVE RECEIVER HUB

Features:

• Provides Class 2 SELV camera power while receiving video transmission and delivering P/T/Z telemetry all over a single 4-pair Cat5e cable
• Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
• Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
• Automatic-reset fault protection; transient protection
• Individually floating outputs ensure total ground-loop immunity
• Frequency response DC to 10MHz
• Diagnostic LEDs show load/no load, miswires, and overload conditions
• Use with the NV-216A-PV, NV-218A-PVD, or NV-226J-PV transceiver at the camera
• Power cameras via UTP over significant distances (see Power Distance Chart)
• 1U high; 8" deep; wall, desk, or rack-mountable, 2ft (60cm) BNC Cables included
• Limited lifetime warranty

The 8-channel NV-8PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with NVT's PVDTM transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load, miswires, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.

General Information
Manufacturer	Phybridge, Inc
Manufacturer Part Number	NV-8PS13-PVD
Manufacturer Website Address	http://www.phybridge.com
Brand Name	NVT Phybridge
Product Model	NV-8PS13-PVD
Product Name	Power Supply Passive Video Receiver Hub
Product Type	Video Extender Receiver
Technical Information
Connectivity Technology	Wired
Maximum Operating Distance	750 ft
Interfaces/Ports
Network (RJ-45)	Yes
Number of Network (RJ-45) Ports	10
Media & Performance
Media Type Supported	Twisted Pair
Twisted Pair Cable Standard	Category 5e
Physical Characteristics
Receiver Height	1.73"
Receiver Width	19"
Receiver Depth	12"
Form Factor	Wall Mountable
Form Factor	Desktop
Form Factor	Rack-mountable
Receiver Weight (Approximate)	14 lb
Miscellaneous
Package Contents	Power Supply Passive Video Receiver Hub Rack Mount "L" Brackets Rubber Feet 8 x 2ft (60cm) Coax Jumpers Molded IEC power inlet cord 7ft (200cm)
Environmentally Friendly	Yes
Environmental Compliance	Restriction of Hazardous Substances (RoHS)
Environmental Compliance	Waste Electrical and Electronic Equipment Directive (WEEE)
Warranty
Limited Warranty	Lifetime