PHYBRIDGE NV-16PS42-PVD 16-CH POWER SUPPLY STUBEQ RECEIVER HUB

Features:

• Provides Class 2 SELV 28 VAC with up to 1 Amp/channel while receiving video transmission and delivering P/T/Z telemetry, all over a single 4-pair Cat5 cable for each camera
• Built-in distribution amplifier with 2 video outputs per channel
• Full motion CCTV video at distances up to 1,500ft (460m) when used with any passive NVT transceiver
• Adaptive StubEQTM fully automatic 2-band equalization provides adjustment free equalization every time, no manual adjustments required
• Automatic-reset fault protection; transient protection
• Individually floating power outputs and differential video inputs ensure total ground-loop immunity
• Diagnostic LEDs show load/no load, miswires, overload conditions, and video status
• Limited lifetime warranty

The 16-channel NV-16PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, Power Supply StubEQTM Active Receiver Hubs have individual floating 28VAC outputs that support at-distance camera loads up to 1 Amp per channel for cable runs up to 1,500ft (460m). A built-in StubEQTM video receiver hub ensures a zero loss video signal for connection into a DVR or IP encoder. Standard features include: automatic-reset fault protection, transient protection, ground loop free individually floating outputs and power and video diagnostics. All NVT products are UL and cUL listed, are compliant with CE, RoHS, WEEE, and come with NVT's lifetime warranty.

General Information
Manufacturer	Phybridge, Inc
Manufacturer Part Number	NV-16PS42-PVD
Manufacturer Website Address	http://www.phybridge.com
Brand Name	NVT Phybridge
Product Model	NV-16PS42-PVD
Product Name	16-Channel Power Supply StubEQ Active Receiver Hub
Product Type	Video Extender Receiver
Technical Information
Connectivity Technology	Wired
Maximum Operating Distance	1500 ft
Interfaces/Ports
Network (RJ-45)	Yes
Number of Network (RJ-45) Ports	4
Media & Performance
Media Type Supported	Twisted Pair
Twisted Pair Cable Standard	Category 5
Physical Characteristics
Receiver Height	1.73"
Receiver Width	19"
Receiver Depth	12"
Form Factor	Wall Mountable
Form Factor	Desktop
Form Factor	Rack-mountable
Receiver Weight (Approximate)	23.50 lb
Miscellaneous
Package Contents	16-Channel Power Supply StubEQ Active Receiver Hub Rack Mount "L" Brackets Rubber Feet 16 x 2ft (60cm) Coax Jumpers Molded IEC power inlet cord 7ft (200cm)
Environmentally Friendly	Yes
Environmental Compliance	Waste Electrical and Electronic Equipment Directive (WEEE)
Environmental Compliance	Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty	Lifetime