Contec Americas 

Contec Americas RP-COM(FIT)H-AF RS-232C-Ethernet Media Converter, supports Power-over-Ethernet

Mfg Part Number:  RP-COM(FIT)H-AF  
Image may not reflect the actual item.
Price: $455.25
Quantity:
Status: Active
No Sales Tax except these states
, PO and Wire.
The RP-COM(FIT)H-AF can be used in various forms of applications, such as to serve as a standard COM port on a Windows PC via Ethernet converted from the RS-232C serial communications interface.

Features
  • Two types of power supplies available
    • RP-COM(FIT)H: Corresponding to the wide input power supply (10 - 30VDC)
    • RP-COM(FIT)H-AF: 5VDC and PoE supporting the use of IEEE802.3af-compatible devices, enabling power to be supplied from UTP cables *1
  • Three operating modes selectable, depending on the usage
    • Virtual COM Mode:
      Can be used like the standard COM ports of a PC (max. 32 ports)
    • Through Mode :
      Can extend the distance between devices without changing settings or applications of each device (max. 254 pairs)
    • Modem Mode :
      Creates communication programs capable of communications between multiple terminals (N:N, max. 254 terminals)
  • Up to 7 channels available for RS-232C (when three COM-2(FIT)GY's are added)
    • Add-on device modules [COM-2(FIT)GY] (for RS-232C 2ch) and [COM-1PD(FIT)GY] *2 (for RS-422A/RS-485 1ch) can be freely combined to allow up to three units to be added for extension
  • DHCP client function
  • Setup utility provided for easier device setup
  • RS-232C supports up to 921.600bps (Serial communication section)*3
  • The wired LAN can be 10Base-T or 100Base-TX (Ethernet section)
  • Provided a 35mm DIN rail attachment
    *1: For supplying power from UTP cables, it is recommended to connect to our POW-CB30(af) or POW-CBM4(af).
    *2: The multi-drop function is not supported in COM-1PD(FIT)GY.
    *3: The speed may be affected by the party on the other side of the connection and the cable length.


    • Specifications

    Item

    RP-COM(FIT)H

    RP-COM(FIT)H-AF

    Serial unit

    Serial standard

    RS-232C

    Data transmission speed

    300 - 921,600bps

    Number of channels

    1

    Connector

    9 pin D-SUB, M (Male) type

    Wired LAN unit

    Ethernet standard

    IEEE802.3u,IEEE802.3

    IEEE802.3u,IEEE802.3,IEEE802.3af

    Data transmission speed

    10/100Mbps

    Access method

    CSMA/CD

    Communication system

    Half Duplex / Full Duplex

    Number of ports

    1(10BASE-T/100BASE-TX)

    Power over Ethernet function(IEEE802.3af)

    Not supported

    Supported

    Supply voltage

    10.0 - 30.0VDC ±5%

    5.0VDC ±5%
    (In case of supply from the power connector)

    Current consumption

    When supplying 12.0VDC 0.2A (Max.) (Only RP-COM(FIT)H)

    When supplying 24.0VDC 0.1A (Max.) (Only RP-COM(FIT)H)

    0.4A (Max.)
    (Only RP-COM(FIT)H-AF : In case of supply from the power connector)

    External Dimensions (mm)

    25.2(W)×64.7(D)×94.0(H) (No protrusions)

    Weight

    100g

    Add-on module

    RS-232C 2ch add-on : COM-2(FIT)GY
    For RS-422A/485 1ch add-on : COM-1PD(FIT)GY

    Combine COM-2(FIT)GY or COM-1PD(FIT)GY up to three freely
    Current consumption for one :
    COM-2(FIT)GY: 5VDC 0.1A(Max.)
    COM-1PD(FIT)GY: 5VDC 0.3A(Max.)

    Operating temperature

    0 - 50°C

    Storage temperature

    -10 - 60°C

    Humidity

    10 - 90%RH(No condensation)

    Floating dust particles

    Not extreme

    Corrosive gases

    None

    Line-Noise resistance

    Line-noise *1

    AC line/±2kV,Signal line/±1kV(IEC1000-4-4Level 3,EN61000-4-4Level 3)

    Static electricity resistance

    Contact discharge/±4kV(IEC1000-4-2Level 2,EN61000-4-2Level 2)
    Atmospheric discharge/±8kV(IEC1000-4-2Level 3,EN61000-4-2Level 3)

    Vibration resistance

    Sweep resistance

    10 - 57Hz/semi-amplitude 0.15mm, 57 - 150Hz/2.0G
    40minutes each in X, Y, and Z directions (JIS C0040-compliant, IEC68-2-6-compliant)

    Impact resistance

    15G, half-sine shock for 11ms in X, Y, and Z directions(JIS C0041-compliant, IEC68-2-27-compliant)

    Grounding

    Class D grounding (previous class 3 grounding)
    *1: When using POA201-10 for RP-COM(FIT)H, when using POA200-20 for RP-COM(FIT)H-A

    If you need accessory information for this product, please use our Online Contact Us Form , our industrial sales team is here to help you find the accessories.

    WARNING:: The plastic used in cable products can expose you to lead and lead components, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    [0] [true] [Yes] [No] [No]