EIZO BY NANAO 

EIZO BY NANAO G21-SH-RMD2P 20.1IN LCD 2MP 1600X1200 MONO MEDICAL G21-SH(SINGLE HEAD) W/ MATROX MD2W

Mfg Part Number:  G21-SH-RMD2P  
Image may not reflect the actual item.
Price: $5,267.45
Quantity:
In Stock/Mfg Direct Ship
Last Updated: Apr 29, 2024
No Sales Tax except these states
, PO and Wire.
The G21 is the optimum choice for accurate diagnosis in medical imaging applications, including PACS, chest radiology, CT, MRI, and angiography images. The G21-SH-RMD2P is a 2MP (1200 x 1600) Monochrome Single Head LCD monitor with Matrox MD2W. The G21 features a 10-bit (1,021 tones) simultaneous grayscale display capability with digital and analog input terminals.

Specifications:


Manufacturer




Eizo by Nanao
Manufacturer Website




www.eizo.com
Cabinet Color

Black
Panel
51 cm (20.1") TFT Monochrome LCD Panel (ASV)
Active Display Size (H x V)
408 x 306 mm / 15.9 x 12.0"
Viewable Image Size
Diagonal: 510 mm / 20.1"
Native Resolution
1200 x 1600 (portrait)
1600 x 1200 (landscape)
Pixel Pitch
0.255 x 0.255 mm
Grayscale Tones
256 from a palette of 1,531
Viewing Angles (H, V)
170°, 170°
Brightness
700 cd/m2 (typical)
Recommended Brightness for Calibration
400 cd/m2
Contrast Ratio
1000:1
Response Time
30 ms (typical)
Scanning Frequency (H, V)
Analog: 31.5 - 130 kHz, 50 - 85 Hz
Digital: 31.5 - 75 kHz, 60 Hz (VGA Text: 70 Hz)
Frame synchronous mode with compatible graphics board
Dot Clock
Analog: 240 MHz
Digital: 162 MHz
Input Signals
Analog: RGB Analog
Digital: DVI Standard 1.0
Sync Formats
Separate, Composite, Sync-on-Green
Input Terminal
DVI-I 29 pin, BNC x 3 (switchable)
USB Ports
1 upstream, 2 downstream
USB Standard
Standard Rev. 1.1
Plug & Play
VESA DDC 2B
Power Requirements
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
Power Consumption
70 watts
Power Save Mode
Less than 8 watts
Built-In Sensor
Backlight Sensor
Power Management
Analog: VESA DPMS
Digital: DVI DMPM
OSD Languages
English, Japanese
Height Adjustment Range
82 mm / 3.2"
Pivot
90°
Tilt / Swivel
40° Up, 0° Down / 35° Right, 35° Left
Dimensions (W x H x D)
With Stand: 347 x 497.5 - 579.5 x 208.5 mm
Without Stand: 347x 449 x 86.5 mm
Net Weight
With Stand: 10.5 kg
Without Stand: 7.3 kg
Hole Spacing
VESA standard (100 x 100)
Certifications and Standards
CE (Medical Device Directive), TÜV/GM (EN60601-1), cTÜVus (UL2601-1, CSA C22.2 No. 601-1), CB (IEC60601-1), VCCI-A, FCC-A, Canadian ICES-003-A, FDA 510(k), CCC
Supplied Accessories
AC power cord, user's manual, signal cable (DVI-I ~ D-Sub mini 15 pin, DVI-D ~ DVI-D), USB cable, warranty registration card

Warranty




3 Year Limited Warranty
WARNING:: The plastic used in cable products can expose you to lead and lead components, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
[0] [true] [Yes] [No] [Yes]