MAKERBOT
900-0001A MAKERBOT METHOD 3D PRINTER ONLY SOLD W/ MAKERCARE PLAT F/ METHOD
Mfg Part Number: 900-0001A , Item #: 3696769
Special Note: Nov 03, 2025
NCNR; If you do not have loading facility, please contact our CST for special handling service.
, PO and Wire.
BUILT TOUGH
Ultra-Rigid Metal Frame Construction
A structurally-optimized metal frame runs the full length of the body to offset flexing. Less flexing means more consistent prints with better part accuracy and fewer failures.
SPEED AND DIMENSIONAL ACCURACY
Dual Performance Extruders
The Dual Performance Extruder system is built from the ground up to accelerate print times and provide dimensional accuracy across every part.
Optimized Material Storage
Dry-Sealed Material Bays
Dry-Sealed Material Bays form a near-perfect seal to keep material free of damaging humidity. A suite of built-in sensors provides that your material is stored in its optimal environment-a feature previously only available in industrial 3D printers.
PUSH THE LIMITS OF WHAT'S POSSIBLE
MakerBot Materials for Method
PRECISION MATERIALS
Extensively tested by MakerBot for the highest reliability and measurably accurate parts.
SPECIALTY MATERIALS
For users looking for special materials with advanced properties to push the limits of what's possible.
| General Information | |
| Manufacturer | MakerBot Industries, LLC. |
| Manufacturer Part Number | 900-0001A |
| Manufacturer Website Address | http://www.makerbot.com |
| Brand Name | MakerBot |
| Product Name | 3D Printer |
| Product Type | 3D Printer |
| Technical Information | |
| Print Jet | Double |
| Print Technology | Fused Deposition Modeling |
| Layer Thickness | 15.7 mil |
| Maximum Print Speed | 19.69 in/s |
| Filament Diameter | 68.9 mil |
| Nozzle Diameter | 15.7 mil |
| Supported Material | Polylactic Acid (PLA) |
| Supported Material | Polyethylene Terephthalate (PET) |
| Supported Material | Polyvinyl Alcohol (PVA) |
| Number of Extruders | 2 |
| Built-in Camera | Yes |
| Heated Chamber | Yes |
| Display & Graphics | |
| Screen Size | 5" |
| Interfaces/Ports | |
| USB | Yes |
| Network (RJ-45) | Yes |
| Network & Communication | |
| Wireless LAN | Yes |
| Power Description | |
| Input Voltage | 120 V AC |
| Input Voltage | 230 V AC |
| Physical Characteristics | |
| Form Factor | Desktop |
| Height | 25.6" |
| Width | 16.3" |
| Length | 17.2" |
| Weight (Approximate) | 65.04 lb |
| Miscellaneous | |
| System Requirements |
|
| Platform Supported | PC |
| Platform Supported | Mac |
| Country of Origin | China |
| Warranty | |
| Limited Warranty | 1 Year |
WARNING:: The plastic used in cable products can expose you to lead and lead components,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
