CISCO
CISCO NCS-55A1-36H-SYS= NCS55A1 FIXED 36X100G BASE CHASSIS
Mfg Part Number: NCS-55A1-36H-SYS= , Item #: 3619950
, PO and Wire.
According to Cisco's 2019 VNI Global Mobile Data Traffic Forecast, mobile data traffic is expected to grow at a 46 percent Compound Annual Growth Rate (CAGR) from 2017 to 2022, two times faster than the growth of global IP fixed traffic during the same period. To help network providers meet these = challenges, the Cisco® Network Convergence System 5500 Series is built with features such as high port densities, deep packet buffering, and forwarding hardware optimized for these types of deployments.
The Cisco NCS 55A1 are the second generation of fixed chassis available for the Cisco NCS 5500 Series. That new series offers three fixed configuration chassis, the NCS 55A1-36H-S, NCS 55A1-36H-SE-S and NCS 55A1-24H. These systems provide functionality vital to both the Top of Rack (ToR) and spine or leaf roles common to modern spine-and-leaf architectures. Capabilities such as advanced packet classification, segment routing, ultra-wide ECMP, programmable network management and telemetry are added to the robust and mature features already present in Cisco IOS® XR Software Release 6.3.1.
The Cisco NCS 55A1-36H-S and NCS 55A1-36H-S provide 36 ports of 100 Gigabit Ethernet with full line rate MACsec capability. All the ports can support 100GE and 40GE optics as well as 25GE to 10GE breakout. They use QSFP28/QSFP+ form factor transceivers. They are designed for base and high scale configuration needs and are supported starting with Cisco IOS XR Software Release 6.3.1.
| General Information | |
| Manufacturer | Cisco Systems, Inc |
| Manufacturer Part Number | NCS55A136HSYS |
| Manufacturer Website Address | http://www.cisco.com |
| Brand Name | Cisco |
| Product Series | 5500 |
| Product Model | NCS55A1 |
| Product Name | NCS55A1 Router Chassis |
| Product Type | Router Chassis |
| Interfaces/Ports | |
| Total Number of Ports | 36 |
| Powerline | No |
| Management Port | Yes |
| Network & Communication | |
| Ethernet Technology | 100 Gigabit Ethernet |
| Network Technology | 100GBase-X |
| Networking Standards | IEEE 802.1ad |
| Networking Standards | IEEE 802.1ab |
| Networking Standards | IEEE 802.1ae |
| Networking Standards | IEEE 802.1Q |
| Networking Standards | IEEE 802.3ad |
| Power Description | |
| Redundant Power Supply Supported | Yes |
| Physical Characteristics | |
| Compatible Rack Unit | 1U |
| Form Factor | Rack-mountable |
| Height | 1.7" |
| Width | 17.3" |
| Depth | 30" |
| Weight (Approximate) | 33 lb |
Connector Cables
Cisco - 100GBase direct attach cable - QSFP28 (M) to QSFP28 (M) - 49 ft - fiber optic - active - for P/N: N3K-C31108PC-V, N3K-C31108PC-V-4BD, N9K-C93180YC-EX-B, N9K-X9732C-EX=
Cisco - 100GBase direct attach cable - QSFP to QSFP - 6.6 ft - fiber optic - active - for P/N: N3K-C31108PC-V, N3K-C31108PC-V-4BD, N9K-C93180YC-EX-B, N9K-X9732C-EX=
Cisco - 100GBase direct attach cable - QSFP to QSFP - 98 ft - fiber optic - active - for P/N: N3K-C31108PC-V, N3K-C31108PC-V-4BD, N9K-C93180YC-EX-B, N9K-X9732C-EX=
Cisco - 100GBase direct attach cable - QSFP28 (M) to QSFP28 (M) - 16.4 ft - fiber optic - active - blue - for P/N: N3K-C31108PC-V, N3K-C31108PC-V-4BD, N9K-C93180YC-EX-B, N9K-X9732C-EX=
Cisco - 100GBase direct attach cable - QSFP to QSFP - 23 ft - fiber optic - active - for P/N: N3K-C31108PC-V, N3K-C31108PC-V-4BD, N9K-C93180YC-EX-B, N9K-X9732C-EX=
Modules
Cisco - QSFP+ transceiver module - 100 Gigabit Ethernet - 100GBase-CWDM4 - LC single-mode - up to 1.2 miles - 1271 nm / 1291 nm / 1311 nm / 1331 nm - for P/N: N3K-C31108PC-V=, N9K-C93180LC-EX=, N9K-C93180LC-EX-B2, N9K-X97160YC-EX=
Cisco - QSFP+ transceiver module - 100 Gigabit Ethernet - 100GBase-SR4 - MPO - up to 328 ft - 840-860 nm
Power Cords
WARNING:: The plastic used in cable products can expose you to lead and lead components,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
