COMNET 

COMNET CLFE4+2SMSC 10/100TX DROP/INSERT/REPEAT 4TX/2EX SELF-MANAGED ETHERNET

Mfg Part Number:  CLFE4+2SMSC  
Image may not reflect the actual item.
Price: $1,007.13 + Free Shipping
Quantity:
More to Come
Last Updated: May 13, 2025
No Sales Tax except these states
, PO and Wire.

The ComNet CLFE4+2SMS[POE](C,U) is a six-port Ethernet switch with add/ drop/repeat functionality and provides 4 copper ports operating at 10/100Mbps and is designed to combine four electrical ports along with the incoming Cat5, UTP or Coax CopperLine® extension port into a further CopperLine extension port that forwards this data to the next CopperLine network device. There is no programming required to use this product. The ComNet CLFE4+2SMS(C,U) comes pre-programmed, preventing network video flooding with DIP switch selection of the first CopperLine port as an uplink or as an unmanaged switch. Ports 1-4 of the CLFE4+2SMSPOE(C,U) can supply up to thirty (30) watts of Power over Ethernet (PoE) and incorporate PoE+ features based on the IEEE 802.3at standard.

Features

  • Full 10/100 Mbps Bandwidth
  • 10/100 Mbps Ethernet 4 × 10/100Mbps RJ-45 Ports 2 × 10/100Mbps UTP/Coax Extended Distance Ports
  • IEEE 802.3 compliant
  • Extended distance ports are switch-selectable for 10 Mbps or 100 Mbps data rate, 1 pair or 4 pair in UTP mode
  • IEEE802.3at PoE+ 30W (PoE models only)
  • Supports Multicast, Unicast
  • Extended distance over UTP or Coaxial Cable
  • Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.
  • Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
  • ComFit standard form factor is interchangeable between stand-alone or rack mount use.
  • Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
  • Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput
  • Standard ComFit models are hot-swappable.

Applications

  • 10/100 Mbps Ethernet
  • High Speed Computer Links
  • Drop/Insert/Repeat Ethernet data over extended distances
  • Factory Automation with UTP
Main Specification
General Information
Manufacturer ACRE
Manufacturer Part Number CLFE4+2SMSC
Manufacturer Website Address http://www.acre-co.com
Brand Name ComNet
Product Series CLFE4+2SMS[POE](C,U)
Product Name 10/100TX Drop/Insert/Repeat 4TX/2EX Self-Managed Switch with PoE+
Product Type Ethernet Switch
Interfaces/Ports
Total Number of Network Ports 6
Modular No
Port/Expansion Slot Details 2 x Fast Ethernet Network
Port/Expansion Slot Details 4 x Fast Ethernet Network
Media & Performance
Media Type Supported Twisted Pair
Media Type Supported Coaxial
Ethernet Technology Fast Ethernet
Network Technology 100Base-EX
Network Technology 10/100Base-TX
Network & Communication
Layer Supported 2
Management & Protocols
Manageable Yes
Power Description
Power Source Power Supply
Physical Characteristics
Form Factor Standalone
Form Factor Wall Mountable
Form Factor Rack-mountable
Form Factor Surface Mount
Form Factor DIN Rail Mountable
Height 6.1"
Width 5.3"
Depth 2.2"
Miscellaneous
Package Contents
  • 10/100TX Drop/Insert/Repeat 4TX/2EX Self-Managed Switch with PoE+
  • DC Plug-in Power Supply
Country of Origin United States
Environmentally Friendly Yes
Environmental Compliance Restriction of Hazardous Substances (RoHS)
Environmental Compliance Waste Electrical and Electronic Equipment Directive (WEEE)
Warranty
Limited Warranty Lifetime
WARNING:: The plastic used in cable products can expose you to lead and lead components, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
[1024] [true] [Yes] [No] [Yes]