COMNET RLGE2+1SMS48DC ELECTRICAL SUBSTATION-RATED THREE-PORT INTELLIGENT

The ComNet RLGE2+1SMS is a substation-rated and industrially hardened three-port self-managed switch with uplink management functionality. Fully compliant with the requirements of IEC 61850-3, IEEE 1613 Class 2, EN50155, and NEMA TS-1/TS-2, it is designed for deployment in environments where high levels of electromagnetic noise and interference (EMI) and severe voltage transients and surges are routinely encountered, such as electrical utility substations and switchyards, heavy manufacturing facilities, trackside and roadside electronic equipment, and other difficult out-of-plant applications. The DIP-switch-selectable 100BASE-FX or 1000BASE-FX port supports conventional CAT-5e/CAT-6 copper or optical transmission media by selection of the appropriate ComNet SFP* module. User-selectable link fault pass-through provides remote indication of a network fault, and two summary fault alarms provide a local or remote indication via dry contact closures in the event of loss of optical link or operating power. The 10/100/1000BASE-TX ports support both auto-negotiation and automatic MDI/MDI-X crossover for full and half-duplex operation; manual MDI/MDI-X switching is not required. The RLGE2+1SMS comes pre-programmed, preventing network video flooding with DIP-switch selection of the SFP port as uplink or as an unmanaged switch. The internal/self-contained 12 to 24 VDC, 48 VDC, or HV AC/DC power supply features redundant power inputs when used with 12 to 24 VDC or 48 VDC power sources, for the highest possible reliability. The simple to install, plug-and-play RLGE2+1SMS is DIN-rail or panel-mountable, and is ideal for mission-critical applications where very high levels of reliability and network availability are of the utmost importance.

FEATURES:

• Full duplex transmission of 10/100/1000 Mbps Ethernet: (2) 10/100/1000BASE-TX ports and (1) 100BASE-FX or 1000BASE-FX SFP port
• Designed to the requirements of IEC 61850-3 and IEEE 1613 Class 2 for electrical utility substations, EN50155 for railway applications, and NEMA TS-1/TS-2 for traffic signal control equipment, and IEC/EN60950-1
• Extended ambient operating temperature range of -40º to +85º C, for use in virtually any environment. Optional conformal coating available for humidity with condensation or airborne particulate matter environments
• Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fibers, optical connector types, and optical transmission distances of up to 120 km
• Link fault pass-through provides a remote indication of a network fault
• 10/100/1000BASE-TX ports support both auto-negotiation and automatic MDI/MDI-X crossover for full and half-duplex operation; manual MDI/MDI-X switching is not required
• 12 to 24 VDC, 48 VDC or HV AC/DC (88 to 300 VDC/85-264 VAC) operating power options
• Internal/self-contained high-reliability power supply eliminates the need for an external power supply, and a screw terminal block connects directly to the power source for permanent, reliable, and maintenance-free operation
• 12 to 24VDC and 48 VDC input power supply versions feature redundant power inputs, for extremely high levels of reliability and availability
• No fans or forced-air cooling required; cooling via natural convection eliminates unreliable and troublesome fans/moving parts for improved reliability
• Indicating LEDs confirm operating status of the switch and the link for ease in troubleshooting
• Summary fault alarms provide a local or remote indication via dry contact closures in the event of loss of optical link or operating power

General Information
Manufacturer	ACRE
Manufacturer Part Number	RLGE2+1SMS48DC
Manufacturer Website Address	http://www.acre-co.com
Brand Name	ComNet
Product Model	RLGE2+1SMS48DC
Product Name	Electrical Substation-Rated 10/100/1000 Mbps 3-Port Self-managed Ethernet Switch
Product Type	Ethernet Switch
Interfaces/Ports
Total Number of Network Ports	3
Uplink Port	Yes
Modular	Yes
Port/Expansion Slot Details	2 x Gigabit Ethernet Network
Port/Expansion Slot Details	1 x Gigabit Ethernet Expansion Slot
Media & Performance
Media Type Supported	Optical Fiber
Media Type Supported	Twisted Pair
Ethernet Technology	Gigabit Ethernet
Network Technology	100/1000Base-FX
Network Technology	10/100/1000Base-TX
I/O Expansions
Total Number of Expansion Slots	1.0
Expansion Slot Type	SFP
Number of SFP Slots	1
Network & Communication
Layer Supported	2
Management & Protocols
Manageable	Yes
Power Description
Power Source	Power Supply
Redundant Power Supply Supported	Yes
Physical Characteristics
Form Factor	Wall Mountable
Form Factor	DIN Rail Mountable
Form Factor	Panel-mountable
Height	4.3"
Width	2.3"
Depth	3.7"
Weight (Approximate)	1.50 lb
Miscellaneous
Package Contents	Electrical Substation-Rated 10/100/1000 Mbps 3-Port Self-managed Ethernet Switch Panel Mounting Adaptor Plate Kit with Mounting Hardware DIN Rail mounting Adaptor Clip Kit with Mounting Hardware
Country of Origin	United States
Environmentally Friendly	Yes
Environmental Compliance	Restriction of Hazardous Substances (RoHS)
Environmental Compliance	Waste Electrical and Electronic Equipment Directive (WEEE)
Warranty
Limited Warranty	Lifetime