The NEC MD21GS-2MP-BK-CB is a 21.3 inch, 2Mega Pixel Medical Grade,
Gray Scale, Clear Base LCD which can be positioned in either Landscape
or Portrait mode. The MultiSync MD Series, a family of medical grade
LCDs, has been designed exclusively for the demanding needs of the
diagnostic professional. This series embodies the precision, high
performance and intelligence you’d expect from a world leader in
display technology. The medically certified 21.3” 2-MegaPixel display
features the X-Light technology, which allows for consistent brightness
and white point levels throughout the life of the monitor and provides
the basis for excellent diagnostic quality.
Features:
X-Light Technology
GammaComp MD software
Fast switch Gamma curves
Rapid Response
Black-level adjustment
Ultra-thin frame design
Internal power supply
Anti-glare and low reflection screen
Portrait or Landscape orientation
|
Factory calibration and consistency:
NEC MultiSync MD Series monitor is calibrated to the DICOM display
function for luminance and to a desired whitepoint (color of the white)
– whether for clear base or blue base. NEC Display Solutions’
patent-pending X-LightTM technology has the unique ability to control
and adjust the luminance and whitepoint via an integrated fastfeedback
internal backlight sensor, which continuously monitors and realigns
these settings to maintain the factory calibration throughout the life
of the monitor. X-Light technology also alleviates the color shift of
the backlight to the yellow spectrum, a common issue with competitive
models.
Monitor matching and reduced downtime:
Another aspect of X-Light technology is its effective and efficient use
in larger radiology departments and their IT infrastructure in
hospitals. X-Light allows for easy multiple monitor matching – whether
matching the whitepoints of two monitors or many monitors, the
capability is virtually limitless. Since all X-Light-equipped monitors
are set for the same whitepoint during production, they can be
exchanged at any time within one location and swapped in existing dual-
or multi-screen configurations.
Standalone calibration and monitor
matching: NEC MultiSync MD Series monitors have been designed to
maintain their factory calibration. However, if calibration or
matching to a replacement is required, the monitors can be
configured using the built-in,
standalone algorithm programmed into the monitor’s firmware. This
feature is useful for monitors that are not used in a setup where
calibration can easily be performed with a PC and external software or
non-supported operating systems.
Ultra-thin-frame design: The
dynamic cabinet design has become a trademark of NEC Display Solutions
TFT displays. With a bezel width of only 16mm, they are perfectly
suited to digital diagnostics systems in which two or more
screens are positioned next to each other. The ultrathin frame
minimizes eye distraction during side-by-side image viewing.
GammaComp™ MD calibration and
conformance software: Quality control and calibration/matching
can also be accomplished using GammaComp MD, ensuring consistent image
quality on a single display system. The software maintains the
monitor’s conformance to the DICOM standard, while providing an
easy-to-use QA environment for medical imaging. Optionally, GammaComp
MD Administrator provides centralized control and management of
multiple display systems.
3061 shades of gray: The
NEC MultiSync MD Series provides support for improved diagnostic
accuracy with simultaneous reproduction of up to 1024 from a palette of
3061 possible grayscales. The programmable 10-bit gamma correction
ensures precise and smooth grayscale tuning and better representation
of just noticeable differences (JNDs). Up to 1024 grayscales can be
depicted at the same time for filmless diagnosis.
Of course, grayscale images based on the
internationally accepted DICOM standard (256 grayscales) can be viewed
as well. Fast, internal switching of the related look-up tables (LUTs)
supports the display’s usage for softcopy reading of images from
different medical modalities.
SA Superfine TFT displays: The
innovative SA Superfine TFT glass with 2- or 3-Megapixel resolution
delivers a brilliant picture with a wide viewing angle of up to
176° and minimal off-angle color shift.
Anti-glare and low reflection:
The SA Superfine TFT glass utilizes round resin beads instead of
inconsistently shaped silica gel within the glass substrates for
advanced glare reduction. Additionally, a low reflection overcoat is
applied on top of the bead layer, which yields a low, uniform
reflection over the surface of the glass. This process also provides
for a truer representation
of black and a higher contrast ratio.
Mutiple video card support: NEC
MultiSync MD Series monitors work with 10-bit or 8-bit cards, however,
10-bit is recommended for optimum performance. 10-bit provides 1024 out
of 3061 shades, while 8-bit provides only 256 out of 3061.
The above
mentioned Video Cards available in this Site:
Matrox 3MP Video Card : (Part # MDM10B-3MP)
Matrox 2MP Video Card: (Part # MDM10B-2MP)
Internal power supply: The NEC
MultiSync MD Series features an internal power supply.Thereby ground or
desk clutter from a clunky power supply is eliminated.
Optional Accessory:
Protective shield(Look for Part #
MD21PS-BK in this site):
As these displays are often used by diagnostic professionals for
illustration purposes, it is common for them to encounter frequent
contact from fingers, pointers and pens. To help protect against LCD
screen damage while maintaining the display’s optimal image quality, an
optional protective shield is available. This lightweight accessory,
which is quickly and easily attached and removed, lengthens the life of
the screen by fending off scratches caused by surface contact. The 100%
transparent shield features anti-reflective coating on both sides,
anti-fingerprint coating on the outside layer, a hard coat for
ruggedness and excellent permanent marker resistance.
SPECIFICATIONS:
|
Manufacturer |
Nec Corporation |
Manufacturer Part Number |
MD21GS-2MP-BK-CB |
Manufacturer Website Address |
www.necsam.com |
Product Line |
MultiSync |
Product Series |
MD |
Product Name |
MultiSync MD Series Medical-grade Monitor |
Marketing Information |
MultiSync MD Series grayscale displays in combination with the
appropriate graphics controller are designed for diagnostic imaging and
for use in Picture Archiving and Communication System (PACS)
applications. Furthermore, diagnostic imaging displays from NEC Display
Solutions are based on technologies and functions which actively
contribute to a reduction of cost of ownership. Flexible areas of
application and reduced service costs are just a few examples that
contribute to cost reduction in healthcare.
|
Product Type |
LCD |
|
Actual Screen Size |
21.3" |
Viewable Screen Size |
21.3" |
Projection Technology |
Active Matrix TFT |
Screen Surface |
Anti-glare
Anti-reflective
|
Dot Pitch |
0.27mm |
Input Signal |
RGB (Analog)
DVI-D (Digital)
|
Monitor Response Time |
35 ms |
Tilt/Swivel |
25° Up | 5° Down Tilt
340° Swivel
|
Viewing Angle |
88° Up
88° Down
88° Left
88° Right
|
Mountable |
100mm - (VESA) |
Pivot Support |
Landscape
Portrait
|
Height Adjustable |
1.81" |
|
Resolution |
1600 x 1200 Native Resolution |
Color Support |
Grayscale |
Ratio |
700:1 Contrast Ratio |
Brightness |
900 Nit |
|
Interfaces |
1 x 15-pin D-Sub
1 x DVI-D (Digital)
|
Ports |
1 x USB |
|
Input Voltage |
120 V AC |
Power Consumption |
65W Typical
<3W Standby
|
Power Management System |
EPA Energy Star |
|
Color |
Black
Clear Base
|
Dimensions |
18.1" Height x 18.4" Width x 7.9" Depth - (Landscape)
20.2" Height x 14.1" Width x 7.9" Depth - (Portrait)
|
Weight |
25.8 lb |
|
Additional Information |
Internal Power Supply
Bezel Width: 16mm
Mutiple video card support
Brightness: 400 cd/m2 (117 fl) calibrated
White Point (color temperature): P104 simulation, x=.292,
y=.321, Approx. 8000 K
Selectable Gamma: DICOM, log-linear, 2.2, 1.8 and
programmable
Sensor Calibration: Brightness/White Point/External
|
Certifications & Standards |
UL2601/EN60601-1/EC601
FCC part 15 class B
CE/MDD
PCT
C-tick
PCBC/B Mark
PSB
EnergyStar
GEEA Energy Label
DIN 6868-57, FDA-510K
|
|
Standard Warranty |
1 Year(s) |
Parts Warranty/Labor |
1 Year(s) |