OMNITRON 8363-1 100 BASE-TX 100BASE-FX ETHERNET ICONVERTER FIBER SC MM 1310NM 5KM

The iConverter 100Fx/Tx manageable media converter is a member of the modular iConverter product family. It provides 100Base-Tx UTP to 100Base-Fx Fiber conversion. This iConverter 100Fx/Tx is available single-mode. It support ST connector. The UTP port supports 100Base-Tx in either half or full duplex mode. A UTP crossover switch eliminates the need for a crossover cable and facilitates connectivity to network equipment such as hubs, switches and workstations.

• UTP port supports Full or Half-Duplex 100Mbps Ethernet
• UTP crossover switch eliminates the need for a crossover cable
• User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
• Management is available with the addition of a management module to the chassis
• Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
• LED displays for immediate visual status of each port
• Lifetime Warranty and free 24/7 Technical Support

General Information
Manufacturer	Omnitron Systems
Manufacturer Part Number	8363-1
Manufacturer Website Address	http://www.omnitron-systems.com
Brand Name	Omnitron Systems
Product Line	iConverter
Product Series	100Fx/Tx
Product Model	8363-1-x
Product Name	iConverter 100Fx/Tx SC Single-Mode 30km Plug-In Module
Package Type	Retail
Product Type	Transceiver/Media Converter
Interfaces/Ports
Total Number of Ports	2
Network (RJ-45)	Yes
Number of Network (RJ-45) Ports	1
Number of SC Ports	1
SC Port Type	Duplex
Media & Performance
Media Type Supported	Optical Fiber
Media Type Supported	Twisted Pair
Fiber Mode Supported	Single-mode
Fiber Optic Cable Wavelength	1310 nm
Maximum Distance Supported	30 km
Network & Communication
Ethernet Technology	Fast Ethernet
Network Technology	100Base-LX
Network Technology	100Base-TX
Power Description
Power Consumption	2 W
Physical Characteristics
Form Factor	Desktop
Form Factor	Rail-mountable
Form Factor	Wall Mountable
Form Factor	Internal
Height	2.8"
Width	0.9"
Depth	4.5"
Weight (Approximate)	8 oz
Miscellaneous
Package Contents	iConverter 100Fx/Tx SC Single-Mode 30km Plug-In Module User Manual
Additional Information	User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting. MTBF(hrs): 1,234,568 Controls: UTP X-over LS/LP RFD UTP FD/HD
Compatibility	iConverter 19-Module Chassis iConverter 5-Module Chassis iConverter 2-Module Chassis iConverter 1-Module Chassis
Certifications & Standards	EIA/TIA 568A/B Compliance: UL CE FCC Class A IEEE 802.3u 100BASE-TX and 100BASE-FX
Environmentally Friendly	Yes
Country of Origin	United States
Warranty
Limited Warranty	Lifetime

The iConverter 100FX/TX manageable media converter is a member of the modular iConverter product family. It provides 100BASE-TX UTP to 100BASE-FX Fiber conversion.

The iConverter 100FX/TX comes in single-mode. It supports SC connectors. The UTP port supports 100BASE-TX in either half or full duplex mode. A UTP crossover switch eliminates the need for a crossover cable and facilitates connectivity to network equipment such as hubs, switches and workstations.

The 100FX/TX features user-selectable Link Propagate, Link Segment and Remote Fault Detection modes to facilitate quick fault detection, isolation, and reporting.

The iConverter 100FX/TX modules are hot swappable and can be mounted in a 19-Module (2U, 3.5 inch high), 5-Module (1U, 1.75 inch high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC and 48VDC power supplies. They can also be mounted in a 2-Module AC or 48VDC powered chassis or in a 1-Module AC powered chassis.

The iConverter is an In-Band or Out-of-Band SNMP-managed media converter family. Supporting 10, 100, 10/100, Gigabit Ethernet, T1, E1, OC-3 and OC-12 technologies, the iConverter family is suitable for LAN and MAN networks where copper to fiber, multimode fiber to single-mode fiber, or dual fiber to single fiber conversions are required.

Management is accomplished by using a Network Management Module (NMM) that can be accessed via Telnet using the serial port through Omnitron’s NetOutlook SNMP-based management software or any other SNMP software. The management provides real-time port and module information, remote parameter configuration and trap notification.

Some of the real-time 100FX/TX parameters that can be monitored include power, link and data receive status. Other parameters include module type and model, hardware and software revisions, serial numbers and an user-defined identifier.

The user can override the 100FX/TX module’s physical switch settings by using SNMP or Telnet to remotely configure switch-selectable parameters such as auto-negotiation, half/full-duplex, Link Propagate, Link Segment or Remote Fault Detection.

In addition to all standard iConverter SNMP traps such as module insertion and removal, the 100FX/TX modules can generate traps on port state changes including link-up, and link-down. Trap monitoring of specific events can be selectively enabled or disabled by the network administrator.

Features:
100BASE-TX UTP to 100BASE-FX Fiber converter
Supports single-mode with SC connectors
100Mbps UTP port with half or full duplex auto-negotiation
UTP crossover switch eliminates the need for a cross-over cable
User-selectable link fault detection modes facilitate quick fault detection, isolation, and reporting
Telnet or serial port interface module configuration
SNMP management via NetOutlook™ provides real-time port and module information, remote parameter configuration and trap notification
Modules are hot-swappable in 19-Module, a 5-Module, a 2-Module or 1-Module chassis
LED displays for immediate visual status of each port
Conforms to IEEE 802.3, 100BASE-TX, and 100BASE-FX specifications
Lifetime Warranty