OMNITRON 8622-1 100 BASE-FX FIBER TO FIBER ICONVERTER SC MM 1310 SM 1310 30KM

The iConverter 100FF media converter provides multimode to single-mode and dual fiber to single fiber conversion. The 100FF is a cost-effective solution for extending fiber network distances.

iConverter 100FF models are available with multimode, single-mode and single-fiber options. The single-mode fiber port supports ST or SC connectors and distances up to 120km. The multimode fiber port supports ST or SC connectors and distances up to 5km.

The 100FF features user-selectable Link Propagate and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.

The iConverter 100FF is available as a compact, unmanaged standalone unit, or as a chassis plug-in module that can be managed with a management module installed in the chassis. The hot-swappable plug-in module can be mounted in a high-density 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.

The standalone 100FF can be wall-mounted and is DC powered. It can be ordered with an external AC/DC power adapter, or it can be directly powered using a 2-pin terminal connector.

General Information
Manufacturer	Omnitron Systems
Manufacturer Part Number	8622-1
Manufacturer Website Address	http://www.omnitron-systems.com
Brand Name	Omnitron Systems
Product Line	iConverter
Product Series	100FF
Product Model	8622-1-x
Product Name	iConverter 100FF SC Multimode 5km to SC Single-Mode 30km Plug-in Module
Package Type	Retail
Product Type	Transceiver/Media Converter
Interfaces/Ports
Total Number of Ports	2
Number of SC Ports	2
SC Port Type	Duplex
Media & Performance
Media Type Supported	Optical Fiber
Fiber Mode Supported	Single-mode
Fiber Mode Supported	Multi-mode
Fiber Optic Cable Wavelength	0.1 mil
Maximum Distance Supported	30 km
Network & Communication
Ethernet Technology	Fast Ethernet
Network Technology	100Base-FX
Network Technology	100Base-LX
Power Description
Power Consumption	1.60 W
Physical Characteristics
Form Factor	Desktop
Form Factor	Rack-mountable
Form Factor	Internal
Form Factor	Wall Mountable
Height	2.8"
Width	0.9"
Depth	4.5"
Weight (Approximate)	8 oz
Miscellaneous
Package Contents	iConverter 100FF SC Multimode 5km to SC Single-Mode 30km Plug-in Module User Manual
Additional Information	User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting. MTBF(hrs): 2,070,393 Controls: LS/LP RFD
Compatibility	iConverter 19-Module Chassis iConverter 5-Module Chassis iConverter 2-Module Chassis iConverter 1-Module Chassis
Certifications & Standards	Compliance: UL CE FCC Class A IEEE 802.3u 100BASE-FX
Environmentally Friendly	Yes
Country of Origin	United States
Warranty
Limited Warranty	Lifetime

The iConverter 100FF manageable media converter is a member of the modular iConverter product family. It provides single-mode to multimode fiber conversion and is a cost-effective solution to extending network distances by connecting multimode fiber network devices over single-mode fiber cabling.

The multimode fiber port supports SC connectors and distances up to 30km. The 100FF features user-selectable Link Propagate, Link Segment and Remote Fault Detection modes to facilitate quick fault detection, isolation, and reporting.

Like all iConverter modules, the 100FF is hot swappable and supports three mounting options. It can be mounted in a 19-Unit, 2U (3.5 inch) high, space-saving 19-inch rack-mountable chassis with any combination of triple-redundant AC or 48VDC power supplies. It can also be mounted in a 2-Unit AC or 48VDC powered chassis or in a 1-Unit AC powered chassis.

Management is accomplished by using an optional SNMP Network Management Module (NMM), which is capable of managing 16 chassis using a single IP address. The NMM can be accessed via Telnet or by using Omnitron’s NetOutlook™ SNMP-based management software or any other SNMP-based software package.

The intuitive NetOutlook network management software provides network administrators with real-time detailed port and module information as well as parameter configuration and event monitoring. NetOutlook can be used as a stand-alone application under Windows 9x/ME/XP/NT/2K or integrated with applications such as HP OpenView™.

Using NetOutlook, the user can configure switch-selectable static parameters. The configurable parameters on the iConverter 100FF include Link Propagate (Link Loss Carry Forward) or Segment and Remote Fault Detection. By using the software management system, these parameters can be configured to override the module’s physical switch settings.

Features:
100BASE-FX Single-Mode (SM) to Multimode (MM) Fiber converter
SC connectors for single-mode (SM) or multimode (MM) fiber
Supports distances up to 30km
User-selectable Link Propagate™, Link Segment™ and Remote Fault Detection™ modes
Graphical SNMP-based network management
Three hot-swappable mounting options: a 19-Unit chassis, a 2-Unit chassis or a 1-Unit chassis
LED displays for immediate visual status of each port
Conforms to IEEE 802.3, 100BASE-FX specifications
Compliance

IEEE : 802.3

Network ports

Port Type : 100BASE-FX - 1