OMNITRON 4332-1 100 BASE-T/100BASE-F FLEXPOINT 100FX/TX ST MM 1310 2KM

The FlexPoint 100Fx/Tx is a 100BASE-FX fiber to 100BASE-TX UTP media converter that provides reliable and cost-effective network connectivity and fiber extension.

The FlexPoint 100Fx/Tx UTP port auto-negotiates to the highest level of performance supported by the attached device. Manual switch settings and LED indicators with on-the-label descriptions enable easy configuration to legacy devices or matching specific network requirements.

• The FlexPoint 100Fx/Tx is a 100BASE-FX fiber to 100BASE-TX UTP media converter
• Supports auto-negotiation of duplex modes for easy installation
• Extends network distances up to 120km
• Supports most network interfaces with a wide variety of cable and connector types
• Labeled status LEDs and switches for quick and easy installation
• Features a crossover switch for connection to switches or workstations
• Wall-mount or rack-mount on a 5-Module shelf or in a 14-Module power-redundant FlexPoint
• Powered Chassis
• Completely software independent with no installation of drivers required
• Peace-of-mind reliability backed by a lifetime warranty and free 24/7 technical support

General Information
Manufacturer	Omnitron Systems
Manufacturer Part Number	4332-1
Manufacturer Website Address	http://www.omnitron-systems.com
Brand Name	Omnitron Systems
Product Line	FlexPoint
Product Series	100Fx/Tx
Product Model	4332-x
Product Name	FlexPoint 100Fx/Tx ST Multimode 5km US AC Powered
Package Type	Retail
Product Type	Transceiver/Media Converter
Interfaces/Ports
Total Number of Ports	2
Network (RJ-45)	Yes
Number of Network (RJ-45) Ports	1
Number of ST Ports	1
ST Port Type	Duplex
Media & Performance
Media Type Supported	Twisted Pair
Media Type Supported	Optical Fiber
Fiber Mode Supported	Multi-mode
Fiber Optic Cable Wavelength	0.1 mil
Maximum Distance Supported	5.01 km
Network & Communication
Ethernet Technology	Fast Ethernet
Network Technology	100Base-TX
Network Technology	100Base-FX
Power Description
Input Voltage	120 V AC
Frequency	60 Hz
Physical Characteristics
Form Factor	Desktop
Form Factor	Rail-mountable
Form Factor	External
Form Factor	Wall Mountable
Height	1"
Width	3"
Depth	4"
Weight (Approximate)	6 oz
Miscellaneous
Package Contents	FlexPoint 100Fx/Tx ST Multimode 5km US AC Powered US Power Supply - 120Volt / 60Hz User Manual
Additional Information	Input Voltage: 6-15VDC via 2.5mm barrel (0.3A @ 9VDC) 5VDC via Molex connector (0.5A @ 5VDC) 100-120VAC/60Hz (0.03A @ 120VAC)
Certifications & Standards	EIA/TIA 568A/B Compliance: UL CE FCC Class A IEEE 802.3u 100BASE-TX and 100BASE-FX
Environmentally Friendly	Yes
Country of Origin	United States
Warranty
Limited Warranty	Lifetime

The FlexPointTM 100FX/TX converter is a member of the modular FlexPoint product line. The FlexPoint product line supports the IEEE 802.3 standard and provides an extensive range of connectivity options across different media types.

The FlexPoint 100FX/TX is a Fast Ethernet 100BASE-FX fiber to 100BASE-TX unshielded twisted pair (UTP) converter. It supports auto-negotiation for half-duplex and full-duplex operations and supports a variety of fiber options.

The FlexPoint 100FX/TX auto-adapts to the highest level of performance supported by the device connected to the UTP port. When the device is a switch or a workstation that supports full duplex, the FlexPoint 100FX/TX adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that only supports half duplex, the FlexPoint 100FX/TX adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation.

The FlexPoint 100FX/TX fiber operates at 1300nm and uses ST connectors. Multimode models that support distances of up to 2km.

The FlexPoint 100Fx/Tx UTP port uses a modular EIA/TIA 568 RJ45 connector that supports category 5 wiring and supports distances of up to 100m (328 ft.). It features a crossover switch that facilitates a straight-through cable connection to a workstation or a hub and eliminates the need for a crossed cable.

The FlexPoint 100FX/TX provides diagnostic data through LED indicators that assist in network installation and maintenance. The LEDs report the availability of power, the modes of operation, the detection of devices and data being received by each port.

The FlexPoint offers several mounting options. The converter can be mounted stand-alone utilizing optional wall-mounting hardware. It can also be rack-mounted using a 5-unit shelf or in a high-density, 14-unit, dual power-redundant Powered Chassis.

Connects switches, hubs and workstations via fiber.
Auto-negotiates half-duplex (HD) or full-duplex (FD) operation to maximize data transfer speed and distance between connected devices.
Supports multimode (MM) fiber, ST connector types.
Supports EIA/TIA 568 RJ45 category 5 wiring and features a crossover switch for convenient uplinks.
Supports up to 412m (1,350 ft.) in half-duplex (all fibers), up to 2 km (1.2 mi.) in full-duplex multimode fiber and up to 58km (36 mi.) in full-duplex single-mode fiber.
Wall-mountable or rack-mountable in a 5-unit shelf or in the power-redundant FlexPoint Powered Chassis.
Software-independent.
Lifetime warranty