TRIPP LITE  Selector

SMART1050SLT Tripp Lite SmartPro Tower 1050SLT UPS

Mfg Part Number:  SMART1050SLT  
Image may not reflect the actual item.
Price: $664.99 + Free Shipping
Quantity:
In Stock: 112
Last Updated: Apr 24, 2024
No Sales Tax except these states
, PO and Wire.

Protects Mission-Critical Equipment

  • Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small business networks
  • Audible alarm signals loss of utility power, low battery or overload
  • 8 NEMA 5-15R outlets
  • 6 ft. power cord with 120V NEMA 5-15P input
  • 690-joule surge suppression rating


Reliable Battery Backup

  • Supports half load up to 19 min. and full load up to 7 min.
  • Internal batteries designed for hot-swap field replacement
  • 95% line-power efficiency rating saves money in energy costs
  • Cold-start capability enables turn-on in battery mode during blackouts


Automatic Voltage Regulation (AVR)

  • Maintains selectable 100V, 110V or 120V nominal output over input range of 83V-145V without using battery power


EMI/RFI Line Noise Filtering

  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance


LED Indicators

  • Front-panel LEDs signal indicate line power, battery power, overload, voltage regulation and battery status


Network Management Cards

  • Compatible with Tripp Lite UPS management card options WEBCARDLX, SNMPWEBCARD and RELAYIOCARD


Communication Ports

  • USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert


Telephone/Network Jacks

  • Protect against power surges over telephone/DSL or network Ethernet lines

Main Specification
General Information
Manufacturer Tripp Lite by Eaton
Manufacturer Part Number SMART1050SLT
Manufacturer Website Address https://tripplite.eaton.com/
Brand Name Tripp Lite by Eaton
Product Line SmartPro
Product Name SMART1050SLT SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS
Product Type Line-interactive UPS
Technical Information
Plug/Connector Type NEMA 5-15P
Receptacle Type NEMA 5-15R
Receptacle Detail 8 x NEMA 5-15R
Cord Length 6 ft
Power Description
Load Capacity (VA) 1050 VA
Load Capacity (Watt) 650 W
Input Voltage 120 V AC
Input Voltage 110 V AC
Input Voltage 100 V AC
Output Voltage 100 V AC
Output Voltage 110 V AC
Output Voltage 120 V AC
Waveform Type Sine Wave
Management
Network Management SNMP Manageable
Alarm Overload
Alarm On Battery
Controls/Indicators
Status Indicators Includes 14 front panel LEDs to indicate line / battery power status, over / under voltage correction, battery charge level (4 LEDs), load percentage (4 LEDs), overload and replace battery. Also includes 1 rear panel site wiring fault indicator.
Interfaces/Ports
USB Yes
Battery Information
Battery Chemistry Lead Acid
Backup/Run Time (Full Load) 7 Minute
Backup/Run Time (Half Load) 19 Minute
Battery Life 6 Year
Hot Swappable Yes
Typical Battery Recharge Time 4 Hour
Environmental Conditions
Maximum Operating Temperature 104°F (40°C)
Physical Characteristics
Height 10.2"
Width 6.8"
Depth 13.2"
Form Factor Tower
Weight (Approximate) 43 lb
Miscellaneous
Package Contents
  • SMART1050SLT SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS
  • USB cable
  • DB9 cable
  • PowerAlert software
  • Owner's manual
Country of Origin China
Warranty
Limited Warranty 3 Year
General Information
Power Rating -
Output Voltage Rating -
Number of Outputs -
Runtime-Full Load -
Runtime-Half Load -

General Information
Manufacturer Tripp Lite
Manufacturer Part Number SMART1050SLT
Manufacturer Website Address www.tripplite.com
Product Line SmartPro
Product Series Tower
Product Name SmartPro Tower 1050SLT UPS
Marketing Information Tripp Lite's SMART1050SLT intelligent, line-interactive sine wave UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 18 minutes half load runtime and 6 minutes fully loaded. 1050VA / 670 watt power handling capability and full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic applications. Includes 8 protected NEMA 5-15R output receptacles. Supports simultaneous remote monitoring of UPS and site power conditions via built-in network accessory, USB and DB9 serial monitoring ports. Optional SNMPWEBCARD accessory enables remote monitoring of UPS as a managed device via network management console applications. Communications interfaces support messaging of UPS and line power status, plus output power control for scheduled or immediate reboot of all connected devices at once. Includes PowerAlert UPS monitoring and unattended shutdown software with built-in management support for an unlimited number of network UPS systems. Free PowerAlert enterprise management software is also available for select opportunities. Built-in audible alarm and 15 LEDs provide graphical readout of line power, battery power, battery charge level, load level, plus AVR boost and trim operational status information. Network grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges. Attractive, black tower housing in rugged all-metal enclosure. Two year warranty with $250,000 Ultimate Lifetime Insurance.
Product Type Line-interactive UPS
Technical Information
Plug/Connector Type NEMA 5-15P
Receptacles 8 x NEMA 5-15R
Power Description
Load Capacity 1050VA / 670W
Input Voltage 110V AC
Input Voltage Range 120V AC Single-phase
Output Voltage 120V AC Single-phase
Frequency 60Hz
Waveform Type Sine Wave
Filtering EMI / RFI
Management
Network Manageability SNMP Manageable Optional
Overload Protection 15A input breaker
Audible Alarms
  • On Battery
  • Overload
  • Controls/Indicators
    Status Indicators Includes 14 front panel LEDs to indicate line / battery power status, over / under voltage correction, battery charge level (4 LEDs), load percentage (4 LEDs), overload and replace battery. Also includes 1 rear panel site wiring fault indicator.
    Interfaces/Ports
    Interfaces/Ports
  • 1DB-9
  • 1USB
  • Modular Slots 1 x Communications Slot
    Battery Information
    Batteries Sealed Lead-acid User-replaceable Hot-swappable
    Battery Life 3 Year(s) to 6Year(s)
    Backup/Run Time
  • 6 Minute(s) 1050VA Full-load
  • 18 Minute(s) 525VA Half-load
  • Battery Recharge Time 4 Hour(s)
    Environmental Conditions
    Temperature 32 °F (0 °C) to 104 °F (40 °C) Operating
    Humidity 0 to 95% Non-condensing Relative Humidity
    Physical Characteristics
    Form Factor Tower
    Power Cord/Cable 6 ft
    Dimensions 8.75" Height x 6.75" Width x 16.75" Depth
    Shipping Dimensions 13" Height x 10" Width x 23.75" Depth
    Weight 43 lb
    Shipping Weight 48.5 lb
    Miscellaneous
    Package Contents
  • SMART1050SLT UPS System
  • PowerAlert Software CD-Rom
  • USB and serial cabling
  • User manual with warranty information
  • Additional Information
  • SMART1050SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
  • 1050VA / 670 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
  • Large internal batteries offer runtimes of 18 minutes at half load (525VA / 335 watts) and 6 minutes at full load (1050VA / 670 watts)
  • Automatic Voltage Regulation (AVR) circuits maintain user-selectable 100, 110, 120 or 127V nominal output over an input voltage range of 91-145V
  • Includes 8 fully-protected NEMA 5-15R output receptacles arranged in a single load bank that can be powered off and back on again via software interface
  • PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
  • Offers simultaneous monitoring of up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise managment software is also available for select opportunities
  • Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
  • Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment
  • Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
  • 15 LEDs offer continuous detailed status information of UPS operating parameters and site power quality
  • Hot-swappable batteries allow on-site battery replacement without powering off connected equipment
  • UL (USA), cUL (Canada), NOM (Mexico), FCC Class B (Emissions) Listed
  • 2 year warranty with up to $250,000 connected equipment insurance
  • System Requirement TYPICAL APPLICATIONS: Ideal for the protection of network fileservers, internetworking gear, switches, hubs, POS terminals, VOIP telephony and traditional PBX switching systems, back office computer systems, ATM machines, informational/internet/commerce kiosks, remote unattended servers, web servers, database servers, security systems, card readers, security cameras and other sensitive electronic devices requiring clean, continuously-regulated output power.
    Certifications & Standards UL1778 (USA), cUL (Canada), FCC Class B (emissions), IEC 1000-4-2 Level 3 (Electrostatic Discharge), IEC 1000-4-4 Level 2 (Fast Transient / Burst), IEC 1000-4-5 Level 3 (Lightning Surge), Conforms to IEEE 587 / ANSI C62.41 specifications
    Manufactures Warranty
    Standard Warranty 2 Year(s)

    Mounting Kits

    PDUs

    Power Cords

    Remote Management Adapters

    Services

    Temperature & Humidity Sensors

    UPS Batteries

    WARNING:: The plastic used in cable products can expose you to lead and lead components, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    [1024] [true] [Yes] [No] [Yes]