
, PO and Wire.
The Cisco QSFP-4X10G-LR-S QSFP module supports link lengths of up to 10km on G.652 single-mode fiber (SMF). It enables high-bandwidth 40G optical links over 12-fiber parallel fiber terminated with MPO/MTP multifiber female connectors. It can also be used in a 4x10G mode for interoperability with 10GBASE-LR interfaces up to 10km.
The 4x10G connectivity is achieved using an external 12-fiber parallel to 2-fiber duplex breakout cable, which connects the 4x10G LR module to four 10GBASE-LR optical interfaces. Cisco's QSFP-4X10G-LR-S is optimized to guarantee interoperability over the full specification range of 10GBASE-LR in 4x10G mode. QSFP-4X10G-LR-S does not support FCoE.
| General Information | |
| Manufacturer | Cisco Systems, Inc |
| Manufacturer Part Number | QSFP-4X10G-LR-S= |
| Manufacturer Website Address | http://www.cisco.com |
| Brand Name | Cisco |
| Product Name | 4x10GBASE-LR QSFP Modules for SMF |
| Product Type | QSFP |
| Technical Information | |
| Application/Usage | Data Networking |
| Application/Usage | Optical Network |
| Interfaces/Ports | |
| Total Number of Ports | 1 |
| Connector Type | MPO/MTP |
| Interfaces/Ports Details | 1 x MPO/MTP 40GBase-LR Network |
| Media & Performance | |
| Media Type Supported | Optical Fiber |
| Fiber Mode Supported | Single-mode |
| Ethernet Technology | 40 Gigabit Ethernet |
| Network Technology | 40GBase-LR |
| Physical Characteristics | |
| Form Factor | Hot-swappable |
| Height | 0.5" |
| Width | 0.7" |
| Depth | 2.9" |
| Weight (Approximate) | 0.22 lb |
| Miscellaneous | |
| Compatibility | Cisco Router Series:
|
WARNING:: The plastic used in cable products can expose you to lead and lead components,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov