ALTRONIX PACE1PTM Long Range Ethernet over UTP/CAT5e Transceiver. Transmits IP video/data over single twisted pair (UTP) up to 150m or CAT5e up to 500m @ 100mbps full duplex and supports PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at
The Pace1PTM is a long range Ethernet transceiver designed for use with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit data at 100mbps full duplex and power via a single twisted pair (UTP) (when paired with Pace1PRM) or Cat5e or higher cable in a PoE(+) compliant format. The Pace1PTM will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) (when paired with Pace1PRM) or structured cable. Applications:
Retrofit digital IP cameras in an analog CCTV CAT5 or UTP installations.
Extend Network link distance in an industrial environment.
Works with Megapixel, HD720, HD1080 and VGA (SD) cameras. With proper head end equipment.
Main Specification
General Information
Manufacturer
Altronix Corporation
Manufacturer Part Number
PACE1PTM
Manufacturer Website Address
http://www.altronix.com
Brand Name
Altronix
Product Name
IP and PoE+ Over Extended Distance UTP or CAT5e
Product Type
Network Extender
Technical Information
Maximum Extended Range
498.69 ft
Maximum Data Transfer Rate
12.50 MB/s
Interfaces/Ports
Network (RJ-45)
Yes
Physical Characteristics
Height
1"
Width
3.5"
Depth
3.5"
Transmitter Weight (Approximate)
4 oz
Miscellaneous
Additional Information
Input:
PoE (15W) IEEE 802.3af compliant or PoE+ (30W)
IEEE 802.3at compliant from Pace1PRM, Pace4PRM, Pace8PRM, or Pace16PRM.
Ethernet:
Connectivity: RJ45, auto-crossover.
Wire type: 4-pair CAT5e or a single twisted pair UTP.
Speed: 10/100BaseT, half/full duplex, auto negotiation.
PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM.
Throughput is rated to pass 100mbps of data.
UTP (single twisted pair) from Receiver to Pace1PTM:
Distance: up to 152m @ 100mbps.
CAT5e or Higher from Receiver to Pace1PTM:
Distance: up to 500m @ 100mbps.
LED Indicators:
Green - PoE ON (by respective RJ45 jack).
Yellow and Green LED IP Link status, 10/100Base-T/active.
Environmental:
Operating Temperature:
For 15W: -40° C to 75° C (-40° F to 167° F).
For 25W: -40° C to 70° C (-40° F to 158° F).
For 30W: -40° C to 60° C (-40° F to 140° F).
Storage Temperature:
-40° F to 167° F (-40° C to 75° C).
Relative humidity: 20 to 85%, non-condensing.
Operating Altitude: - 1000 to 6,561.679 ft.
(- 304.8 to 2000m).
Functions:
Auto detection and protection of legacy non-PoE cameras/devices.
WARNING:: The plastic used in cable products can expose you to lead and lead components,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
[1024] [true] [Yes] [No] [Yes]
Same card, added safety online.
Verified by Visa is a new service that lets you shop online with added confidence.
Through a simple checkout process, Verified by Visa confirms your identity when you make purchases at participating online stores. It's convenient, and it works with your existing Visa card.
Plus, Verified by Visa is a snap to use. You register your card just once, and create your own password. Then, when you make purchases at participating online stores, a Verified by Visa window will appear. Simply enter your password and click submit. Your identity is verified and the purchase is secure.
To activate Verified by Visa in your Visa card, or to learn more, contact the financial institution that issued your Visa card or visit
visa.com/verified.