ALLIED TELESIS AT-210TS-05D 10T MAU SLIM LINE TRANSCEIVER W/ SLIDE LATCH

AT-210TS transceivers incorporate other functions that offer improved network reliability for workstations. The 10T link integrity test function provides a continuous test of the connection to the multiport repeater.

General Information
Manufacturer	Allied Telesis, Inc
Manufacturer Part Number	AT-210TS-05D
Manufacturer Website Address	http://www.alliedtelesis.com
Brand Name	Allied Telesis
Product Series	AT210TS
Product Model	AT-210TS-05D
Product Name	AT-210TS 10Mbps Ethernet Micro Transceiver
Product Type	Transceiver/Media Converter
Interfaces/Ports
Total Number of Ports	1
Network (RJ-45)	Yes
Number of Network (RJ-45) Ports	1
Media & Performance
Media Type Supported	Twisted Pair
Network & Communication
Ethernet Technology	Ethernet
Network Technology	10Base-T
Power Description
Input Voltage	12.6 V DC
Physical Characteristics
Color Family	White
Product Color	White
Form Factor	External
Height	1"
Width	2.7"
Depth	1.7"
Weight (Approximate)	2.50 oz
Miscellaneous
Additional Information	IEEE 802.3 compliant and Ethernet Version 1.0 and 2.0 compatible Direct Attachment Unit Interface (AUI) connection Improved mechanical fit for Macintosh, Sun SPARC stations and IBMRS/6000 workstations Switch-selectable SQE test and LED Polarity detection and correction
Certifications & Standards	EMI: FCC Class A TUV Vfg-B Safety: UL CSA TUV-GS
Warranty
Limited Warranty	5 Year

The CentreCOM Micro Transceivers are 10Base2 and 10BaseT compliant transceivers designed to reduce Ethernet cabling costs. Compact size allows these transceivers to connect directly to the workstation, bringing thin Ethernet or Unshielded Twisted Pair (UTP) wiring directly to the workstation. With UTP and inexpensive coax network media, distances up to 100 meters between workstations can be supported using UTP, and up to 185 meters using coax. The AT-210TS transceivers incorporate other functions that offer improved network reliability for workstations. The 10BaseT link integrity test function provides a continuous test of the connection to the multiport repeater. A test pulse is periodically transmitted and expected at the companion transceiver's receive side. If the pulse is not seen on the receive side, the transceiver is placed into link test fail mode. Normal operation of the transmit side is inhibited and the "Link" LED is turned off. Normal operation is resumed when the link is re-established by the reception of a valid packet or two valid link pulses. 10BaseT transceivers also address the polarity of the receive pair wiring. In less than one second, the UTP transceiver automatically "rolls" the wire pair and allows for the proper operation of the transceiver. Also, the "Polarity" indicator on AT-210TS transceivers is not illuminated when the circuitry has transposed the receive pair.

Device Type	Transceiver
Enclosure Type	External
Width	27.5 in
Depth	1.7 in
Height	1 in
Enclosure Color	White
Networking
Connectivity Technology	Wired
Cabling Type	10Base-T, AUI
Data Link Protocol	Ethernet
Data Transfer Rate	10 Mbps
Status Indicators	Port status, link activity, power, link OK
Compliant Standards	IEEE 802.2, IEEE 802.3
Expansion / Connectivity
Interfaces	1 x network - Ethernet 10Base-T - RJ-45 female 1 x network - Ethernet AUI - 15 pin D-Sub (DB-15) male
Connections	- 15 pin D-Sub (AUI)
Manufacturer Warranty
Service & Support	Limited lifetime warranty
Service & Support Details	Limited warranty - parts and labor - lifetime
Environmental Parameters
Min Operating Temperature	32 °F
Max Operating Temperature	122 °F
Humidity Range Operating	5 - 80%

Download DataSheet