EBRIDGE4CR Altronix Four (4) Port IP over Coax Receiver

The eBridge4CR is a CAT5 to Coax cable Ethernet receiver. The receiver enables fast 10/100Base-T Ethernet digital communication to be received over Coax cable. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition data transmission over the Coax can be extended to 1500' (five times the 100m/328ft Ethernet maximum length), eliminating the need for repeaters. At the same time the unit can combine Composite Video Signal with the Ethernet data enabling connection to an analog input on a monitor or matrix switch. The eBridge4CR is to be used with a compatible Sony Hybrid cameras with "sloc" technology. An eBridge1CT is required for other IP cameras/devices.

General Information
Manufacturer	Altronix Corporation
Manufacturer Part Number	EBRIDGE4CR
Manufacturer Website Address	http://www.altronix.com
Brand Name	Altronix
Product Line	eBridge
Product Model	EBRIDGE4CR
Product Name	Four (4) Port IP over Coax Receiver
Product Type	Transceiver/Media Converter
Interfaces/Ports
Total Number of Ports	4
Network (RJ-45)	Yes
DVI	No
USB	No
Parallel Port	No
Digital Audio	No
Digital Audio/Video	No
Management Port	No
Number of Network (RJ-45) Ports	4
Media & Performance
Media Type Supported	Coaxial
Media Type Supported	Twisted Pair
Maximum Distance Supported	0.46 km
Network & Communication
Ethernet Technology	Fast Ethernet
Network Technology	10/100Base-TX
Physical Characteristics
Form Factor	Desktop
Height	1.7"
Width	5.2"
Depth	8.9"
Weight (Approximate)	2.90 lb
Miscellaneous
Certifications & Standards	UL listed for Information Technology Equipment (UL 60950-1) CUL Listed for Information Technology Equipment (UL 60950-1) CE Approved C-TICK Compliant (Z1409)
Country of Origin	United States
Warranty
Limited Warranty	Lifetime