TYCON SYSTEMS
TYCON SYSTEMS Tycon Power TP-DCDC-4824-HP PoE Injector
Mfg Part Number: TP-DCDC-4824-HP , Item #: 1545857
Image may not reflect the actual item.
Price: $71.54
+ Free Shipping
Quantity:
In Stock: 96
Last Updated: Aug 03, 2025
No Sales Tax except these states
, PO and Wire.
The TP-DCDC-HP Series of DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 56VDC Power Over Ethernet voltage from a 24V or 48V battery system. They have an
integrated POE injector to apply the 24VDC or 56VDC to the CAT5 Ethernet cable. Passive POE and 802.3at models are available. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source.
They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). They have various protections for surge, short circuit and overload. The units have a power output of up to 35W. The input and output are isolated so the units can accept minus voltage on input and can be wired for positive voltage on the output for those systems which are negative voltage based.
If the remote device does not support power over Ethernet, splitters (POE-SPLT) are available to split the data and DC voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER cable can be used.
integrated POE injector to apply the 24VDC or 56VDC to the CAT5 Ethernet cable. Passive POE and 802.3at models are available. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source.
They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). They have various protections for surge, short circuit and overload. The units have a power output of up to 35W. The input and output are isolated so the units can accept minus voltage on input and can be wired for positive voltage on the output for those systems which are negative voltage based.
If the remote device does not support power over Ethernet, splitters (POE-SPLT) are available to split the data and DC voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER cable can be used.
Main Specification
| General Information | |
| Manufacturer | Tycon Power Systems |
| Manufacturer Part Number | TP-DCDC-4824-HP |
| Manufacturer Website Address | http://www.tyconpower.com |
| Brand Name | Tycon Power |
| Product Series | TP-DCDC |
| Product Model | TP-DCDC-4824-HP |
| Product Name | TP-DCDC-4824-HP PoE Injector |
| Product Type | PoE Injector |
| Power Description | |
| Input Voltage | 48 V DC |
| Maximum Output Voltage | 24 V DC |
| Maximum Output Current | 1.25 A |
| Maximum Output Power | 30 W |
| Interfaces/Ports | |
| Input Ports | 10/100/1000Base-T |
| Output Ports | 10/100/1000Base-T |
| Physical Characteristics | |
| Height | 1.5" |
| Width | 3" |
| Length | 4.9" |
| Weight (Approximate) | 10.58 oz |
| Miscellaneous | |
| Compatibility |
|
| Certifications & Standards |
|
| Warranty | |
| Limited Warranty | 1 Year |
WARNING:: The plastic used in cable products can expose you to lead and lead components,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
