TYCON SYSTEMS TP-DCDC-4848-HP Tycon Power High Power DC to DC Converter

The TP-DCDC-HP Series of DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 56VDC Power Over Ethernet voltage from a 24V or 48V battery system. They have an integrated POE injector to apply the 24VDC or 56VDC to the CAT5 Ethernet cable. Passive POE and 802.3at models are available. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source.
They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). They have various protections for surge, short circuit and overload. The units have a power output of up to 35W. The input and output are isolated so the units can accept minus voltage on input and can be wired for positive voltage on the output for those systems which are negative voltage based.
If the remote device does not support power over Ethernet, splitters (POE-SPLT) are available to split the data and DC voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER cable can be used.

General Information
Manufacturer	Tycon Power Systems
Manufacturer Part Number	TP-DCDC-4848-HP
Manufacturer Website Address	http://www.tyconpower.com
Brand Name	Tycon Power
Product Series	TP-DCDC
Product Model	TP-DCDC-4848-HP
Product Name	High Power DC to DC Converter
Product Type	PoE Injector
Power Description
Input Voltage	72 V DC
Maximum Output Voltage	56 V DC
Maximum Output Current	500 mA
Maximum Output Power	30 W
Interfaces/Ports
Output Ports	Ethernet
Physical Characteristics
Height	1.5"
Width	3"
Length	4.9"
Weight (Approximate)	10.58 oz
Miscellaneous
Compatibility	Wireless Access Points Client Devices IP Phones Security Camera Systems
Certifications & Standards	FCC Class B NE55022 Class B UL1950 CSA 22.2 TUV EN60950 IEEE802.3at