OMNITRON 8787-2 iConverter RS-422/485 Serial to Fiber Media Converter DB-9 LC Single-Mode 60km Module

The Omnitron iConverter RS422/485 is a managed serial RS-422 and RS-485 to fiber converter that transmits serial protocol over fiber media. Fiber transmission extends serial signals up to 120km, and is immune from electrical and magnetic interference.

The RS422/485 is available with a single-mode, multimode or single-fiber transceiver. The serial port interface is available with either a DB-9 female connector or terminal block connector for field wiring.

The RS422/485 automatically detects the signal baud rate of connected Full-Duplex serial device, ranging from 110 to 921,600 baud. It also automatically adjusts to changes in the connected device's Full-Duplex baud rate during operation without reconfiguration or interruption of service.

Half-Duplex RS-485 and Full-Duplex RS-485 (sometimes referred to as Multipoint RS-422) operations are supported via a configurable baud rate DIP-switch to match the master/slave communication timing.

• Supports baud rates ranging from 110 to 921,600 baud
• Serial interface available as DB-9 or Terminal Block connector for field wiring
• Features built-in configurable terminators
• Features configurable baud rate for Half-Duplex RS-485 and Full-Duplex RS-485 operation
• Supports RTS and CTS controls
• Supports Point-to-Point Half and Full-Duplex, Multi- Point Full-Duplex, and either Head, Tail or Mid-Position
• Features remote Fiber Loopback DIP-switch for easy testing of fiber link, even during serial transmission
• Management is available with the addition of a management module to the chassis
• Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
• Lifetime Warranty and free 24/7 Technical Support

General Information
Manufacturer	Omnitron Systems
Manufacturer Part Number	8787-2
Manufacturer Website Address	http://www.omnitron-systems.com
Brand Name	Omnitron Systems
Product Line	iConverter
Product Model	8787-2-x
Product Name	iConverter RS422/485 DB-9 LC Single-Mode 60km Plug-In Module
Package Type	Retail
Product Type	Transceiver/Media Converter
Interfaces/Ports
Total Number of Ports	2
DVI	No
USB	No
Parallel Port	No
Digital Audio	No
Digital Audio/Video	No
Management Port	No
Number of LC Ports	1
LC Port Type	Duplex
Number of Serial Ports	1
Media & Performance
Media Type Supported	Optical Fiber
Fiber Mode Supported	Single-mode
Fiber Optic Cable Wavelength	0.1 mil
Maximum Distance Supported	60 km
Power Description
Input Voltage	3.3 V DC
Physical Characteristics
Form Factor	Internal
Form Factor	Desktop
Form Factor	Wall Mountable
Form Factor	Rack-mountable
Height	2.8"
Width	0.9"
Depth	4.5"
Weight (Approximate)	8 oz
Miscellaneous
Package Contents	iConverter RS422/485 DB-9 LC Single-Mode 60km Plug-In Module User Manual
Additional Information	Serial Port Type: DB-9 (female)
Compatibility	iConverter 19-Module Chassis iConverter 5-Module Chassis iConverter 2-Module Chassis iConverter 1-Module Chassis
Certifications & Standards	Compliance: UL CE FCC Class A
Environmentally Friendly	Yes
Environmental Compliance	Restriction of Hazardous Substances (RoHS)
Environmental Compliance	Waste Electrical and Electronic Equipment Directive (WEEE)
Country of Origin	United States
Warranty
Limited Warranty	Lifetime