, PO and Wire.
| Ethernet | 2 x Realtek 8111CP GbE
chipsets LAN1 shared with PCIe x1 slot (Select by switch) LAN2 shared with PCIe Mini card Slot (Select by switch) |
| I/O Interface | 2 x SATA/SATA II with
5V/12V power output (not support by iQ7-US15W) 1 x IDE (IDE Signal support from iQ7-US15W) 1 x CF type II (Signal support from iQ7-US15W) 1 x SATA with 5V/12V power output(IDE to SATA JM20330 Signal support from iQ7-US15W) 1 x SD Slot 2 x PS2 KB/MS 6 x USB 2.0 1 x USB Client 1 x LPT 4 x RS232 |
| Super I/O | Winbond W83627EHG |
| Digital I/O | 8-bit digital I/O, 4-bit input/4-bit output by Winbond W83627EHG |
| Audio | Realtek ALC883 for 7.1
channels HD audio 1 x Mic-in, Lin-out connector |
| Display Interfaces | VGA DB15 connector (SDVO
to VGA by chrontel CH7021A) 18/24 bit single channel LVDS TTL (LVDS to TTL) |
| Expansion | 1 x PCIe Mini card slot
shared with LAN1(Select by switch) 1 x PCIe x1 slot shared with LAN2 (Select by switch) |
| Power Supply | ATX support |
| Temperature | operation: 0ºC~ 60ºC ( 32ºF~140ºF) |
| Humidity | operation: 5% ~95 non-condensing |
| Dimensions | 170 mm x 170 mm |
| Power Supply | ATX Power, ATX/AT Mode Support |
| Weight | GW: 700g / NW: 350g |
| Humidity | Operation: 5% ~95 non-condensing |
| Ethernet | 2 x Realtek RTL8111CP GbE chipsets LAN1 shared with PCIe Mini card slot (selected by switch: SW3) LAN2 shared with PCIe x1 Slot (selected by switch: SW3) |
| Power Supply | ATX Power, ATX/AT Mode Support |
| Dimensions | 170 mm x 170 mm |
| Audio | Realtek ALC883 for 7.1 channels HD Audio 1 x Mic-in, Line-out connector |
| Digital I/O | 8-bit digital I/O, 4-bit input/4-bit output by SMSC SCH3114-NU |
| Temperature | Operation:0°C ~ 60°C (32°F~140°F) |
| Display Interfaces | VGA DB15 connector (SDVO to VGA by Chrontel CH7317B) 18/24-bit single-channel LVDS TTL (LVDS to TTL by TI SN75LVDS) (Option) |
| Super I/O | SMSC SCH3114-NU |
| Expansion | 1 x PCIe Mini card slot shared with LAN1 (selected by switch: SW3) 1 x PCIe x1 slot shared with LAN2 (selected by switch: SW3) |
| I/O Interface | 2 x SATA/SATA 3Gb/s with 5V/12V power output (not support by iQ7-US15W) 1 x IDE (IDE signal support from iQ7-US15W) 1 x CF Type II (signal support from iQ7-US15W) 1 x SATA with 5V/12V power output (IDE to SATA Bridge: Jmicron JM20330 Signal support from iQ7-US15W) 1 x SD Slot 2 x PS2 KB/MS 6 x USB 2.0 1 x USB Client 1 x LPT 4 x RS-232 |

WARNING:: The plastic used in cable products can expose you to lead and lead components,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov