Moxa Mfg Mini-Store MOXA Major Lines Selector
Moxa EDS-408A-1M2S-SC 8 port entry level managed Ethernet switches, 1 MM and 2 SM fiber ports w/ SC connector, 0 ~ 60C
MOXA Major LinesMfg Part Number: EDS-408A-1M2S-SC , Item #: 977703
Status: Active
, PO and Wire.
Certifications: ABSDNVEN 50121-4EN 55032/EN 55024FCC Part 15BGLLRLVD(EN 60950-1)NEMA TS2NKKRoHSUL508
- Up to 3 fiber ports (multi/single-mode, SC or ST connector) for wind power
- IPv6 Ready logo awarded (IPv6 Logo Committee certified)
- DHCP Option 82 for IP address assignment with different policies (available soon)
- Modbus/TCP industrial Ethernet protocol supported (available soon)
- IEC 61850 GOOSE messaging compliance
- Plug-n-Play Turbo Ring (recovery time < 20 ms at full load) and RSTP/STP (IEEE 802.1w/D) capability
- Port-based VLAN to ease network planning
- QoS (IEEE 802.1p and TOS/DiffServ) to increase determinism
- RMON for efficient network monitoring and proactive capability
- SNMPv1/v2c/v3 for different levels of network management
- Bandwidth management prevents unpredictable network status
- Port mirroring for online debugging
- Works with MXview industrial network management software
| Technology: | |
| Standards | IEEE 802.3 for
10BaseT IEEE 802.3u for 100BaseT(X) and 100Base FX IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1p for Class of Service |
| Protocols | SNMPv1/v2c/v3, DHCP Server/Client, TFTP, SNTP, SMTP, RARP, RMON, HTTP, Telnet, Syslog (Available Soon: DHCP Option 66/67/82, BootP, LLDP, Modbus/TCP, IPv6) |
| MIB | MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON Group 1, 2, 3, 9 |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| Switch Properties: | |
| Priority Queues | 4 |
| IGMP Groups | 256 |
| Max. Number of Available VLANs | 64 |
| VLAN ID Range | VID 1 to 4094 |
| Interface: | |
| RJ45 Ports | 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| Fiber Port(s) | 100BaseFX ports (SC/ST connector) |
| Console for External Antenna | RS-232 (RJ45 connector) |
| LED Indicators | PWR1, PWR2, FAULT, MASTER, COUPLER, 10/100M |
| DIP Switches | Turbo Ring, Master, Coupler, Reserve |
| Alarm Contact | 1 relay output with current carrying capacity of 1A @ 24 VDC |
| Optical Fiber | |
 |
|
| Power Requirements: | |
| Input Voltage | 24 VDC (12 to 45 VDC), redundant dual inputs |
| Input Current | 0.32 A @ 24 V |
| Overload Current Protection | Present |
| Connection | 1 removable 6-contact terminal block |
| Reverse Polarity Protection | Present |
| Physical Characteristics: | |
| Housing | Metal, IP30 protection |
| Dimensions | 53.6 x 135 x 105 mm (3.17 x 5.31 x 4.13 in) |
| Installation | DIN-Rail mounting, wall mounting (with optional kit) |
| Environmental Limits: | |
| Operating Temperature | Standard Models: 0
to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Agency Approvals: | |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | EN61000-4-2 (ESD),
level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 |
| Safety | UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 (Pending) |
| Hazardous Location | UL/cUL Class I,
Division 2, Groups A, B, C, and D (Pending); ATEX Zone 2, Ex nC IIC (Pending) |
| Shock | IEC60068-2-27 |
| Freefall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Maritime | DNV (Pending), GL (Pending) |
| Warranty: | |
| Warranty Period | 5 years |
| Product Category | |
| Product Category | Managed Switch |
| Mechanical | |
| Dimensions: WxHxD (mm) | 53.6mm x 135mm x 105mm |
| Mounting | Din Rail |
| IP level | IP30 |
| Enclosure | Metal |
| Data Rate and Number of Ports | |
| Number of Ports | 8 |
| Fast Ethernet, 10/100 Mbps | 5 |
| Gigabit, 10/100/1000 Mbps | - |
| Interface | |
| Interface Type | 10/100 Mbps RJ45, 100 Mbps Multi-mode SC, 100 Mbps Single-mode SC |
| Fiber connector | 1 Multi-mode SC; 2 Single-mode SC |
| PoE | - |
| M12 Connector | - |
| SFP | |
| Digital I/O/Relay | Yes |
| Console | - |
| Bypass | - |
| Modular Design | - |
| Available Modular | - |
| Power | |
| Power Input Type | Redundant DC/DC Terminal Block |
| Operating Supply Voltage | 24 VDC |
| Power Consumption | 0.24 A @ 24 V |
| Reliability | |
| Operating Temperature | 0C to 60C |
| Redundancy and Backup Options | |
| Redundancy Technology | Yes |
| STP/RSTP/PSTP/MSTP | Yes |
| Automatic Backup Configurator | Yes |
| Certification | |
| Certification | |
| UL 508 (Industrial Control) | |
| EN 50155 (Rail Industry) | |
| EN 50121-4 (Rail Industry) | |
| EN 50121-3-2 (Rail Industry) | |
| NEMA TS2 (ITS) | |
| IEC 61850-3 (Power Industry) | |
| IEEE 1613 (Power Industry) | |
| IEEE 1588PTP (Power Industry) | |
| DNV.GL (Marine) | |
| ABS.LR.NK (Marine) | |
| C1D2 (Oil & Gas) | |
| ATEX (Oil & Gas) | |
| Network Management and Control | |
| Layer Level Switching | L2 |
| Modbus/TCP | Yes |
| Ethernet/IP | Yes |
| PROFINET | Yes |
| SNMP/RMON | Yes |
| LLDP | Yes |
| DHCP | Yes |
| IGMP Snooping/GMRP | Yes |
| QoS | - |
| VLAN 802.1Q | - |
| IEEE 802.1X | Yes |
| LACP (802.3ad) | |
| Port Lock | - |
| IPv6 | Yes |
Specification
| Interface | |
| Console Port | RS-232 (RJ45 connector) |
| DIP Switches | Turbo Ring, Master, Coupler, Reserve |
| Fiber Ports | 100BaseFX ports (SC/ST connector) |
| LED Indicators | PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL, 10/100M |
| Alarm Contact | 1 relay output with current carrying capacity of 1 A @ 24 VDC |
| RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
| Power Requirements | |
| Overload Current Protection | Present |
| Reverse Polarity Protection | Present |
| Input Voltage | 24 VDC (12 to 45 VDC), redundant dual inputs |
| Input Current | 0.32 A @ 24 V |
| Connection | 1 removable 6-contact terminal block |
| Technology | |
| Standards | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for Flow Control IEEE 802.1D-2004 for Spanning Tree Protocol* IEEE 802.1w for Rapid STP IEEE 802.1p for Class of Service IEEE 802.1Q for VLAN Tagging (*Available in Q3, 2011) |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| Protocols | IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, TFTP, SNTP, SMTP, RARP, RMON, HTTP, Telnet, Syslog, DHCP Option 66/67/82, BootP, LLDP, EtherNet/IP*, Modbus/TCP, IPv6, NTP Server/Client* (*Available in Q3, 2011) |
| MIB | MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 |
| Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| MTBF (mean time between failures) | |
| Time | EDS-405A Series: 392,000 hrs EDS-408A Series: 363,000 hrs |
| Database | Telcordia (Bellcore), GB |
| Physical Characteristics | |
| Weight | 890 g |
| Dimensions | 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) |
| Installation | DIN-Rail mounting, wall mounting (with optional kit) |
| Housing | Metal, IP30 protection |
| Switch Properties | |
| MAC Table Size | 8 K |
| Packet Buffer Size | 1 Mbit |
| Standards and Certifications | |
| EMI | FCC Part 15 Subpart B Class A, EN 55022 Class A |
| Safety | UL 508, EN 60950-1 |
| Rail Traffic | EN 50121-4 |
| Shock | IEC 60068-2-27 |
| Vibration | IEC 60068-2-6 |
| EMS | EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3; EN 61000-4-8 |
| Freefall | IEC 60068-2-32 |
| Marine | DNV, GL, LR, ABS, NK |
| Warranty | |
| Warranty Period | 5 years |
| Details | See http://www.moxa.com/support/warranty.htm |
WARNING:: The plastic used in cable products can expose you to lead and lead components,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
Manufacturer Warranty Policy:
MOXA
Moxa products are warranted to be free from manufacturing defects in materials and workmanship starting from the date of delivery. The actual warranty period of the product(s) depends on the product category.
Warranty Periods
- Warranty Period Products Category
- 5 Years Embedded RISC Box Computers
- 3 Years Embedded x86 Box Computers
- 2 Years Ethernet I/O Products
- 5 Years Industrial Ethernet Switches
- 5 Years Media Converters
- 5 Years Serial to Ethernet Products
- 5 Years USB to Serial Hubs
- 5 Years Video over IP Servers
- 5 Years Wireless Ethernet Products
* The 3-year warranty period for Embedded x86 Box Computers is effective for products shipped after Jan. 1, 2010. A 5-year warranty still applies to products shipped before 2010.
* For products containing storage devices (hard drives, flash drives, etc.), back up your data before sending the products for repair. Moxa is not responsible for any loss of data. Please ensure the use of properly licensed software with our systems. Moxa does not condone the use of pirated software and will not service systems using such software. Moxa will not be held legally responsible for products shipped with unlicensed software installed by the user.
* If the customer opens the computer to install an HDD without making any modifications to the unit, the warranty will remain valid.
- Warranty Period Accessories
- 3 Years SFP Ethernet Modules
- 3 Years DIN-Rail Power Supplies
- 1 Years Power Adaptors
- 1 Years Fiber Patch Cords, SC to ST Duplex Adaptors
- 5 Years Serial Connection Boxes
- 5 Years Serial Connection Cables
- Oiginal manufacturers' warranty period. Hard Drives
Product warranties remain valid provided the product was properly installed and used. Defects, malfunctions, or failures of the warranted product caused by damage resulting from acts of God (such as floods, fire, etc.), environmental and atmospheric disturbances, other external forces such as power line disturbances, host computer malfunction, plugging the board in under power, or incorrect cabling, and damage caused by misuse, abuse, and unauthorized alteration or repair, are not warranted. A product will not be warranted in the following situations:
- The product has been found to be defective after the warranty period has expired.
- The product has been subjected to misuse, abuse, or unauthorized repair, whether by accident or other cause. Such conditions will be determined by Moxa at its sole and unfettered discretion.
- The warranty for customized and ODM products is defined by contract, and is excluded from this policy.
- The product is an accessory not carrying the Moxa brand name. In this case, warranties are limited to the warranty provided by the original manufacturer of the accessory. Examples of such products and accessories are power adaptors and cables.
- The product has been updated, reworked, or improperly tested by the customer, or by a third party at the request of the customer.
- The product is damaged beyond repair due to natural disasters, such as by lightning, flood, earthquake, etc.
- The product in question is either software, or an expendable item, such as a fuse, battery, SD/ CF card, RAM/ DOM module, etc.
- Products with altered and/or damaged serial numbers are not entitled to ourwill not be serviced by Moxa.
This warranty is limited to the repair and/or replacement, at Moxa's sole discretion, of the defective product during its warranty period. Moxa will replace any product found to be defective within the first three months of purchase provided said product was properly installed and used. The customer must obtain a Return Merchandise Authorization (RMA) number prior to returning the defective product to Moxa for service.
The customer agrees to insure the product or assume the risk of loss or damage during transit, to prepay shipping charges, and to use the original shipping container or equivalent. Customers may either seek assistance from the original dealer, or from the closest Moxa Service Office. Repaired or replaced products are warranted for ninety (90) days from the date of repair or replacement, or for the remainder of the original product's warranty period, whichever is longer. For large order projects, customers may purchase an extended maintenance contract. Such products may have a shorter chipset life cycle, or some parts may have a limited warranty from the original supplier of the parts. Please contact Moxa's sales department if you would like to extend the maintenance period of a Moxa product.
Limitation of Liability
The provisions of the warranty are in lieu of any other warranty, whether expressed or implied, written or oral. Moxa's liability arising out of the manufacture, sale, or supplying of the product and its use, whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the original cost of the product. In no event shall Moxa be liable for unintended or consequential damages, including, but not limited to, a loss of profits or use damages arising out of the manufacture, sale, or supplying of the product.
