
, PO and Wire.
The IW-PWRINJ-60RGDMG= power injector is powered by a single-phase AC voltage input in the range of 90VAC to 264VAC, providing a maximum output of power at a nominal DC Voltage on the appropriate four data pairs of the output RJ45 connector. The power injector meets the requirements of IEEE 802.3bt as a PSE. It can accept 10/100/1000/2500/5000/10000 Base-T traffic on the input and output RJ45 connectors and pass through these signals between the network and the access point.
| General Information | |
| Manufacturer | Cisco Systems, Inc |
| Manufacturer Part Number | IWPWRINJ60RGDMG |
| Manufacturer Website Address | http://www.cisco.com |
| Brand Name | Cisco |
| Product Model | IW-PWRINJ-60RGDMG= |
| Product Name | IW-PWRINJ-60RGDMG= PoE Injector |
| Product Type | PoE Injector |
| Power Description | |
| Input Voltage | 230 V AC |
| Input Voltage | 120 V AC |
| Maximum Output Current | 670 mA |
| Maximum Output Power | 60 W |
| Interfaces/Ports | |
| Input Ports | RJ-45 |
| Output Ports | RJ-45 |
| Physical Characteristics | |
| Form Factor | Surface/Pole Mountable |
| Height | 2.3" |
| Width | 6.7" |
| Length | 9.7" |
| Weight (Approximate) | 4.80 lb |
WARNING:: The plastic used in cable products can expose you to lead and lead components,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov