BROADCOM 

Broadcom NT BCM957412N4120C 10Gb s Ethernet PCIE3.0 x8 OCP3.0 Network Adapter

Mfg Part Number:  BCM957412N4120C  
Image may not reflect the actual item.
Price: $420.62
Quantity:
In Stock: 29
Last Updated: Aug 27, 2026
No Sales Tax except these states
, PO and Wire.
The Broadcom® BCM957412N4120C is a dual-port 10 Gb/s PCI Express 3.0 x8 network adapter designed to the Open Compute Project (OCP) 3.0 Design Specification in small form factor with two SFP+ network connectors. The adapter supports SFP+ optical modules and copper directattach cables. The network adapter uses the Broadcom BCM57412 25GbE MAC controller with an integrated dual-channel 10GbE SFI transceiver.

Features
  • Dual-port pluggable media interface, which can connect to a 10G SFP+ optical transceiver or a copper directattach cable.
  • Fully compliant with the SFF-8402 standard.
  • x8 PCI Express 3.0 compliant.
  • SR-IOV with up to 128 virtual functions (VFs).
  • Function-Level Reset (FLR) support.
  • TruFlow™ flow processing engine.
  • Virtual Network Termination-VXLAN, NVGRE, Geneve, GRE encap/decap.
  • vSwitch Acceleration.
  • Tunnel-aware stateless offloads.
  • DCB support - PFC, ETS, QCN, DCBx.
  • RDMA over Converged Ethernet (RoCE).
  • Network Controller Sideband Interface (NC-SI).
  • SMBus 2.0.
  • MCTP over SMBus.
  • PCIe-based UART and KCS.
  • Jumbo frames up to 9 KB.
  • Advanced congestion avoidance.
  • Multiqueue, NetQueue, and VMQ.
  • IPv4 and IPv6 offloads.
  • TCP, UDP, and IP checksum offloads.
  • Large send offload (LSO).
  • Large receive offload (LRO).
  • TCP segmentation offload (TSO).
  • Receive-side scaling (RSS).
  • Transmit-side scaling (TSS).
  • VLAN insertion/removal.
  • Interrupt coalescing.
  • Network boot-PXE, UEFI.
  • iSCSI boot.
  • Wake-on-LAN (WOL).
  • MSI and MSI-X.
  • Conforms to the OCP 3.0 Design Specification Version 1.00.
Applications
  • Dual-port 10-Gigabit Ethernet adapter for OCP systems.
Main Specification
General Information
Manufacturer Broadcom Corporation
Manufacturer Part Number BCM957412N4120C
Manufacturer Website Address https://www.broadcom.com
Brand Name Broadcom
Product Line NetXtreme
Product Series E
Product Model BCM957412N4120C
Product Name Dual-Port 10 Gb/s Ethernet PCI Express 3.0 x8 OCP 3.0 SFF Network Adapter
Product Type 10Gigabit Ethernet Card
Interfaces/Ports
Host Interface PCI Express 3.0 x8
Total Number of Ports 2
I/O Expansions
Expansion Slot Type SFP+
Media & Performance
Media Type Supported Optical Fiber
Network & Communication
Network Technology 10GBase-X
Physical Characteristics
Form Factor Plug-in Card
WARNING:: The plastic used in cable products can expose you to lead and lead components, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
[1024] [true] [Yes] [No] [Yes]