MICRON CRUCIAL 112438 2GB DDR2 SDRAM Memory, 2GB KIT 2X1GB PC2-6400 800MHZ DDR2 240PIN UNBUFF 2.2V

The Ballistix line is specifically built for performance enthusiasts who want to push the performance envelope without worrying about data loss or corruption, mysterious intermittent errors and display problems, or worse the dreaded BSOD! The Ballistix line of high-performance memory modules features advanced speed grades, low latencies, and integrated aluminum heat spreaders.

General Information
Manufacturer	Micron Technology, Inc
Manufacturer Part Number	112438
Manufacturer Website Address	http://www.micron.com
Brand Name	Micron
Product Name	2GB (2 x 1 GB) DDR2 SDRAM Memory Module
Product Type	RAM Module
Technical Information
Memory Size	2 GB
Memory Technology	DDR2 SDRAM
Number of Modules	2 x 1GB
Memory Speed	800 MHz
Memory Standard	DDR2-800/PC2-6400
Error Checking	Non-ECC
Signal Processing	Unbuffered
Physical Characteristics
Number of Pins	240-pin
Warranty
Limited Warranty	Lifetime

A Ballistix dual inline memory module (DIMM) consists of a number of memory components that are attached to a black printed circuit board. The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.

Ballistix 240-pin DIMMs are used to provide DDR2 SDRAM memory for desktop computers. DDR2 is a leading-edge generation of memory with an improved architecture that allows it to transmit data very fast. Ballistix 240-pin DIMMs are available in DDR2 PC2-4200 SDRAM (DDR2 533), DDR2 PC2-5300 SDRAM (DDR2 667), and DDR2 PC2-6400 (DDR2 800).

To use DDR2 memory, your system motherboard must have 240-pin DIMM slots and a DDR2-enabled chipset. A DDR2 SDRAM DIMM will not fit into a standard SDRAM DIMM socket or a DDR DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor™ tool.)

The number of black components on a Ballistix 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. Ballistix 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins. The notch in a 240-pin DDR2 DIMM is closer toward the center of the module.

• Part Number: BL2KIT12864AA804
• Module Size: 2GB kit (1GBx2)
• Package: Ballistix 240-pin DIMM
• Feature: DDR2 PC2-6400
• Configuration: 128Meg x 64
• DIMM Type: UNBUFFERED
• Error Checking: NON-ECC
• Speed: DDR2-800
• Voltage: 2.2V
• Memory Timings: 4-4-4-12
• Specs: DDR2 PC2-6400 • 4-4-4-12 • UNBUFFERED • NON-ECC • DDR2-800 • 2.2V • 128Meg x 64